Adding LibreELEC to the GRUB2 bootloader

liberi · January 6, 2017 at 12:14 PM

Hello,

can i use with how to adding LibreELEC to the GRUB2 bootloader?

Quote

3.1 Is it possible to dualboot LibreELEC? Yes, it is. But it´s not supported. See: "Link to 'How-To:dual-boot'-Wiki"

liberi

**Klojum** · January 6, 2017 at 12:27 PM Official Post

Doublecheck your drive numbers via

Code

sudo blkid

Add the following to your 40_custom file:

Code

menuentry "LibreELEC" {
    set root=(hd0,5)
    linux /KERNEL boot=/dev/sda5 disk=/dev/sda6 quiet
}

Adjust the drive values to your own PC setup as check at the start.

Then finalize the GRUB2 setup

Code

sudo update-grub2

Reboot for the result.

liberi · November 20, 2017 at 11:57 AM

Hello, can i use this menuentry with LibreELEC 8.2?

Code

menuentry "LibreELEC" {
    set root=(hd0,5)
    linux /KERNEL boot=/dev/sda5 disk=/dev/sda6 quiet
}

Greetz

liberi

**Klojum** · November 20, 2017 at 1:03 PM Official Post

Only if both LibreELEC /dev/sdXx partition numbers are identical to those on your own system.
Otherwise you need to change them.