Is it expected that kodi uses ~20% CPU while idle on Rpi4?

  • Hi all,

    I am trying to avoid burning electricity for nothing, and noticed that my rpi4 is always pretty hot. A look at top shows that kodi uses constantly about 20% CPU.
    ```

    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    11313 root 20 0 2779240 304556 77704 S 21.9 7.8 1:25.60 kodi.bin
    11074 root 20 0 4776 3800 1728 R 0.3 0.1 0:01.32 top

    Debug logs are pretty quiet. If anyone feels like having a look, I don't see anything suspicious but I'm not that familiar with kodi internals: https://paste.sr.ht/~nicoco/5b8318…3638e63f518bb40

    Is that expected or is something wrong with my setup? The obvious suspect would be one of my extensions, maybe https://github.com/jellyfin/jellyfin-kodi/ ?


    Thanks for your answer(s)!

  • Back when this model was released, ppl were encouraged to have a fan to keep things below the throttle temperature. I’m pretty sure my “idle” processor and memory usage, which can creep up over 50% of my Pi4’s 4GB, can be directly attributed to a bunch of IPTV channels/IPTV Simple. Temperatures used to creep up towards 60C until I bought a massive copper heatsink with contact points for SoC and RAM, and a good thermal paste from AliExpress. Now I might tick over 50C when I stream 4K remuxes over Ethernet…

    Oh! I’ve also disabled wifi on the Pi, which may help. I bet a gentle breeze would drop temps a few degrees more, consistently.

  • Is that expected or is something wrong with my setup? The obvious suspect would be one of my extensions, maybe

    Hi, just a hint: why you don't try to disable one by one your addons, maybe could find if one of them "burn electricity for nothing".

  • Back when this model was released, ppl were encouraged to have a fan to keep things below the throttle temperature. I’m pretty sure my “idle” processor and memory usage, which can creep up over 50% of my Pi4’s 4GB, can be directly attributed to a bunch of IPTV channels/IPTV Simple. Temperatures used to creep up towards 60C until I bought a massive copper heatsink with contact points for SoC and RAM, and a good thermal paste from AliExpress. Now I might tick over 50C when I stream 4K remuxes over Ethernet…

    Oh! I’ve also disabled wifi on the Pi, which may help. I bet a gentle breeze would drop temps a few degrees more, consistently.

    The temperature is not an issue in and out of itself, I just hate

    Hi, just a hint: why you don't try to disable one by one your addons, maybe could find if one of them "burn electricity for nothing".

    I'll try that, thanks for the idea. It is just a tiny bit annoying because my main use is the "jellyfin for kodi" addon and I'm slightly concerned that this will erase its DB, which takes something like 12hours to re-sync when I enable the addon… But it's probably the way to go.

    Thanks for your replies, if I ever find out I'll update this post.

  • The temperature is not an issue in and out of itself, I just hate

    The hardware dislike the high temperature too. A passive heat sink should be OK.

    I'm slightly concerned that this will erase its DB, which takes something like 12hours to re-sync when I enable the addon…

    Disabling an addon should "freeze it", without to loose data. Thought I didn't used jellyin, so maybe it's different...

  • Hi all,

    I am trying to avoid burning electricity for nothing, and noticed that my rpi4 is always pretty hot. A look at top shows that kodi uses constantly about 20% CPU.

    Hi, it's 20% of one cpu core only, so your RPi4 is about 95% idle.

    Mine is about the same, almost without any addon.

    And pretty hot is relative. Mine is warm to touch, but cputemp is 39°C, a light fever 😉