[x86-64][LibreELEC x CB1 Builds] Dolby Vision FEL, HDR10+ and Full 3D

  • Thanks CroqueMr for the release. It's fantastic.
    My setup is TV LG G6, Denon AVR, ASUS NUC Ultra 7 225H.
    I have one issue with the NUC connected trought the Denon HDMI. When i start the NUC, i see the BIOS screen and then the video output don't switch to the TV. I can't see the setup screen. I need to switch off and on several time the Denon to view the setup screen. The same with LiibreELEC installed on the system. I see the home screen only if I turn off and on the Denon many times.
    But, if i connect the NUC directly to the TV, it's all fine.
    My Denon is the avr 110 anniversary edition.

    I have try with a Windows 11 USB Stick, and works.
    It's a generic problem of LibreElec?

    Thanks

    try different setting for 4k/8k signal format in denon, you options STANDARD, ENHANCED, 8K ENHANCED. maybe this will help

  • Hi Nissel,

    The NUC have two HDMI out. Where i can setup LibreElec to split the signal?
    One HDMI to the TV and the other HDMI to the AVR IN

    Thanks

    Just make sure your TV is on the primary HDMI and AVR on the secondary, and change the Audio devices (both normal and passthrough) in the System / Audio settings to be the secondary HDMI.