How to do custom edid on pineH64?

    Hello,

    Since last update CEC works again on the PineH64. So no my TV switches of when I switch of LE, just as I want it. But this creates another issue, When I switch on LE, my TV should switch on also. It does switch on, but I get the "no signal" screen. Then I have to pull the power from the pineH64 and boot again.

    I hoped to fix this issue by following the "custom EDID" tutorial on the wiki, so my screen wakes in early boot. When I do all the steps as described in the "intel" section, i get a kernel panic while booting. This is what comes on screen:

    Failed to execute /init (error -2)

    kernel panic - not syncing: No working init found

    When I remove the initrd section from the APPEND line, LE starts fine again. So it has something to do with the initrd file (edid.cpio)

    The instructions in the wiki are outdated and wrong, /usr/lib/firmware should be added to the cpio, not /lib/firmware (the latter breaks the lib->usr/lib symlink and then everything goes south).

    Just use the "create-edid-cpio" script which is included in the image, it'll create a working /flash/edid.cpio with all files from /storage/.config/firmware/edid

    so long,

    Hias