The xorg.conf file should be placed in /storage/.config (ConfigFiles share).
RetroELEC Kodi+Wayland+Emulationstation+RetroArch (x86/XU4/RPi)
-
escalade -
May 12, 2016 at 2:26 PM -
Thread is Resolved
-
Any general update soon?
-
Thanks for the new build to try. Still no luck for me, I am seeing this error in my log now.
[ 1.084780] Linux agpgart interface v0.103
[ 1.084803] [drm] radeon kernel modesetting enabled.
[ 1.084850] [drm] amdgpu kernel modesetting enabled.
[ 1.084867] checking generic (e0000000 1fa4000) vs hw (e0000000 10000000)
[ 1.084867] fb: switching to amdgpudrmfb from EFI VGA
[ 1.084876] Console: switching to colour dummy device 80x25
[ 1.084989] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1043:0x876B 0xC6).
[ 1.084993] [drm] register mmio base: 0xFE500000
[ 1.084993] [drm] register mmio size: 524288
[ 1.085010] amdgpu 0000:09:00.0: Direct firmware load for amdgpu/raven_gpu_info.bin failed with error -2
[ 1.085011] amdgpu 0000:09:00.0: Failed to load gpu_info firmware "amdgpu/raven_gpu_info.bin"
[ 1.085015] amdgpu 0000:09:00.0: Fatal error during GPU init
[ 1.085017] [drm] amdgpu: finishing device.
[ 1.085080] amdgpu: probe of 0000:09:00.0 failed with error -2
going back to my j4205-itx as my main htpc so will have more time to play with this now and hopefully get it working correctly.
-
Download from here: raven_gpu_info.bin
Place in /storage/.config/firmware/amdgpu.
Thank you, I will give this a shot when I get home from work.
-
This doesn't have tv adapter drivers installed like official version has? I have TBS tv tuner card but I can't see it in Tvheadend Configuration.
-
This doesn't have tv adapter drivers installed like official version has? I have TBS tv tuner card but I can't see it in Tvheadend Configuration.
Escalades has no dvb cards so these drivers are not included but you can try one of my remix builds. It's basically esclades remix but include the crazycat69 drivers.
What's the model or name of your TBS tuner? Is it a listed device? TBS Technologies - LinuxTVWiki
-
Escalades has no dvb cards so these drivers are not included but you can try one of my remix builds. It's basically esclades remix but include the crazycat69 drivers.
What's the model or name of your TBS tuner? Is it a listed device? TBS Technologies - LinuxTVWiki
I think the model of my card is TBS6281. I will try your build, thanks
-
The TBS6281 uses the saa716x driver, it's not in the kernel tree but supported by the crazycat69 drivers so it should work.
-
The TBS6281 uses the saa716x driver, it's not in the kernel tree but supported by the crazycat69 drivers so it should work.
Thanks a lot! Works great. You have also included drivers for my onboard wifi so now I don't have to use usb wifi dongle anymore.. good work
-
Still no luck for me, xorg is still failing to even start with the newest build. I was however able to get the ubuntu 18.04 beta installed without issue, so I do have hope.
-
Still no luck for me, xorg is still failing to even start with the newest build. I was however able to get the ubuntu 18.04 beta installed without issue, so I do have hope.
Can you upload ubuntus dmesg log to pastebin and post it ?
What mainboard do you use? I guess the kernel & wifi firmware just does it's job
I was trying to compile the new xserver 1.20 rc but ran into some problems. I created a new xorgproto package that replaces the single proto packages and added nettle to the dependencies. Is there anything else I have to change? I can deliver some logs after a rebuild too.
-
What mainboard do you use? I guess the kernel & wifi firmware just does it's jobI have this motherboard: ASUS B150I Pro Gaming/Wifi/Aura
Any other LE build doesn't recognize wifi, only bluetooth
-
I use a GA-B150N Phoenix-WIFI (rev. 1.0) | Mainboards - GIGABYTE Germany so I think it's more or less the same generation of ITX gaming/whatever board. The gigabyte board uses a M.2 socket wifi intel wifi card so it's easy to make it work. But I haven't found any information about your wifi chipset, maybe it's some atheros stuff? Anyway good to know that it works.
Can you post the result of "dmesg | grep wifi"? I guess escalade could add the driver too if he knows whats missing.
-
"dmesg | grep wifi" doesn't return anything. But I think the wifi is "Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter". Not sure
