so i have this weird tv box which has a s905w cpu and a p212 board i cant use any other dtb files for it i extracted the raw 256 kb dtb file from the tv box but idk how to do the rest.
tysm anything helps
i cant give the dtb file here so i would attach a gdrive link
box.dtb
can anyone capable help me plzz
-
skbiddymaster9918 -
December 11, 2025 at 4:57 PM -
Thread is Unresolved
-
-
-
-
Code
N2PLUS:~ # mv box.dtb box.dump N2PLUS:~ # dd if=box.dump of=box.dtb bs=1 skip=2048 N2PLUS:~ # dtc -I dtb -O dts -o box.dts box.dtbAfter renaming the file, carving out the dtb, then decompiling the dtb: https://paste.libreelec.tv/amazing-oyster.log
This shows the box is an S905L (p271) board, which is a cost-reduced version of S905W for the Chinese market. It omits VP9 support and uses a Mali 450-MP2 GPU instead of the Mali 450-MP3 used with S905W/X boards. You MUST boot using the p271 dtb file. If you boot with any dtb that describes a Mali 450-MP3 the kernel hard-faults and boot fails.
-
ohhh i understand it now. where can i get the dtb for s905l i though it was a s905w cuz the tvbox's bootsplash was the s905w
-
You can use meson-gxl-s905l-p271.dtb to boot the AMLGX image: https://wiki.libreelec.tv/hardware/amlogic
