[RPi4] ConnMan WiFi Configuration

    Is there any other limitations with conman wireless client on RPI4?
    I have problems detecting SSIDs 2 meters away to the router with a beacon interval higher than 100 ms for 5 GHz ac 20 MHz channel 36. It only connects with beacon interval 100 ms. Setting it higher it won't detect, all the rest settings equal, WMM-APSD disabled to rule out.

    I like high beacon intervals like 1 sec to maximise throughput and never had a problem. Only Libreelec 13 with conman/iwd.

    Yes, it can connect to 5ac and 2.4n GHz channel 13 with 1 sec beacon interval, but not on Libreelec.

    Is there any manual way to force a connection to a SSDI with a 1 sec. beacon?
    I mean, maybe the UI doesn't show it because the timer doesn't support 1 sec, but it may connect to it.

    Also a permanent fix to enable channel 13 detection on 2.4n GHz?

    Edited 2 times, last by wyup (September 16, 2025 at 2:42 PM).