Hardware: WETEK Play2
Software Version: 7.90.009
Version: NAND
The box will run a long time with TVHeadend Client and a lower framerate (SAT>IP Installation)
If I use PlexKodiConnect and my retranscoded 8Mbit streams with a Framerate of >49 fps the ethernet controller will crash after a time. I cant see anything in the log:
Code
[37452.265884@1] vfm_map_store:rm default
[37452.265903@1] vfm_map_store:add default decoder ppmgr deinterlace amlvideo amvideo
[37452.266220@1] codec:Video stbuf alloced at 0000000076800000, size = 15728640
[37452.273039@1] codec:H264 sysinfo: 1920x1080 duration=4004, pts_outside=1,
[37452.288418@1] DI: di_receiver_event_fun: vframe provider reg
[37452.300364@1] codec:video first pts = 0
[37452.300488@1] [tsync_avevent]event:1, param 0
[37452.300490@1] video resume
[37452.300778@1] [tsync_avevent]event:1, param 0
[37452.300780@1] video resume
[37452.326996@1] codec:video first checkin pts = 1676a
[37452.327009@1] codec:first check in vpts <0x2c:0x1676a> ok!
[37452.327178@0] codec:Enter set parameter cmd1.
[37452.328237@0] codec:vdec1 video changed to 3840 x 2160 60 fps clk->648MHZ
[37452.328251@0] codec:actual_dpb_size 15 max_dpb_size 5
[37452.328310@0] codec:video first pts = 1676a
[37452.407007@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1920/1080/0
[37452.436872@0] vpts to scr, apts = 0x0, vpts = 0x1676a
[37452.525645@0] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
[37452.525664@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
[37452.525727@0] aml_audio_hw: audio_set_aiubuf channel == 8
[37452.525741@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=8, same source mode(1)
[37452.525747@0] aml_spdif_dai: share the same clock
[37452.525756@0] aml_audio_hw: IEC958 PCM32
[37452.525764@0] hdmitx: audio: aout notify rate 44100
[37452.525767@0] hdmitx: audio: aout notify size 32
[37452.525770@0] hdmitx: audio: no update
[37452.525775@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37452.525780@0] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37452.525783@0] hdmitx: audio: aout notify rate 44100
[37452.525786@0] hdmitx: audio: aout notify size 32
[37452.525788@0] hdmitx: audio: no update
[37452.530843@0] aml_audio_hw: audio_set_aiubuf channel == 8
[37452.530863@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=48000, runtime->channels=8, same source mode(1)
[37452.530867@0] aml_spdif_dai: share the same clock
[37452.530878@0] aml_audio_hw: IEC958 PCM32
[37452.530883@0] hdmitx: audio: aout notify rate 48000
[37452.530886@0] hdmitx: audio: aout notify size 32
[37452.530891@0] hdmtix: set audio
[37452.530904@0] hdmitx tx_aud_src = 1
[37452.530937@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
[37452.530941@0] hdmitx aud_n_para = 6144
[37452.530961@0] hdmitx set channel status
[37452.556931@0] hdmitx: audio: Audio Type: PCM
[37452.556945@0] hdmitx: audio: set audio param
[37452.556957@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37452.556963@0] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37452.556967@0] hdmitx: audio: aout notify rate 48000
[37452.556972@0] hdmitx: audio: aout notify size 32
[37452.556975@0] hdmitx: audio: no update
[37452.557396@0] Setting a 8 channel layout matching layout #5
[37452.557425@0] aml_audio_hw: audio_set_aiubuf channel == 8
[37452.557435@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=48000, runtime->channels=8, same source mode(1)
[37452.557443@0] aml_spdif_dai: share the same clock
[37452.557453@0] aml_audio_hw: IEC958 PCM32
[37452.557458@0] hdmitx: audio: aout notify rate 48000
[37452.557461@0] hdmitx: audio: aout notify size 32
[37452.557464@0] hdmitx: audio: no update
[37452.557473@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37452.557478@0] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37452.557481@0] hdmitx: audio: aout notify rate 48000
[37452.557484@0] hdmitx: audio: aout notify size 32
[37452.557487@0] hdmitx: audio: no update
[37452.562565@0] aml_snd_m8_card aml_m8_snd.45: I2S playback enable
[37452.562570@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback enable
[37452.598531@1] [tsync_avevent]event:1, param 0
[37452.598550@1] video resume
[37452.720212@0] DI: recycle_keep_buffer recycle keep cur di_buf 6 (
[37452.720213@0] DI: 6
[37452.720214@0] DI: 7
[37452.720215@0] DI: )
[37453.174808@0] codec:finished correct frame dur
[37453.174821@0] codec: new=4004,old_duration=4004,cnt=25
[37519.732628@0] [tsync_avevent]event:1, param 1
[37519.732668@0] video pause!
[37539.732951@1] [tsync_avevent]event:1, param 0
[37539.732956@1] video resume
[37559.969873@1] DI: di_receiver_event_fun , is_bypass() 0 trick_mode 0 bypass_all 0
[37559.969875@1] DI: disabled, not keep buffer.
[37559.969878@1] DI: di_receiver_event_fun: vf_notify_receiver unreg
[37559.969901@1] codec:free_alloced_keep_buffer (null). (null). (null)
[37559.969904@1] codec:keep exit is di
[37559.969907@1] [tsync_avevent]event:2, param 0
[37559.969911@1] codec:video first pts = 0
[37559.969928@0] di_uninit_buf keep cur di_buf 4 (4 5 -1)
[37559.980393@1] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
[37559.981891@1] vfm_map_store:rm default
[37559.981941@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[37560.334030@0] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
[37560.334034@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
[37560.334159@0] aml_audio_hw: audio_set_aiubuf channel == 8
[37560.334168@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=48000, runtime->channels=8, same source mode(1)
[37560.334172@0] aml_spdif_dai: share the same clock
[37560.334179@0] aml_audio_hw: IEC958 PCM32
[37560.334183@0] hdmitx: audio: aout notify rate 48000
[37560.334185@0] hdmitx: audio: aout notify size 32
[37560.334186@0] hdmitx: audio: no update
[37560.334189@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37560.334192@0] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37560.334193@0] hdmitx: audio: aout notify rate 48000
[37560.334194@0] hdmitx: audio: aout notify size 32
[37560.334195@0] hdmitx: audio: no update
[37560.338668@0] aml_audio_hw: audio_set_aiubuf channel == 8
[37560.338690@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=8, same source mode(1)
[37560.338694@0] aml_spdif_dai: share the same clock
[37560.338705@0] aml_audio_hw: IEC958 PCM32
[37560.338711@0] hdmitx: audio: aout notify rate 44100
[37560.338715@0] hdmitx: audio: aout notify size 32
[37560.338719@0] hdmtix: set audio
[37560.338733@0] hdmitx tx_aud_src = 1
[37560.338764@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[37560.338768@0] hdmitx aud_n_para = 6272
[37560.338794@0] hdmitx set channel status
[37560.366927@3] hdmitx: audio: Audio Type: PCM
[37560.366930@3] hdmitx: audio: set audio param
[37560.366938@3] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37560.366942@3] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37560.366946@3] hdmitx: audio: aout notify rate 44100
[37560.366948@3] hdmitx: audio: aout notify size 32
[37560.366949@3] hdmitx: audio: no update
[37560.367560@3] Setting a 8 channel layout matching layout #7
[37560.367578@3] aml_audio_hw: audio_set_aiubuf channel == 8
[37560.367582@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=8, same source mode(1)
[37560.367585@3] aml_spdif_dai: share the same clock
[37560.367592@3] aml_audio_hw: IEC958 PCM32
[37560.367595@3] hdmitx: audio: aout notify rate 44100
[37560.367596@3] hdmitx: audio: aout notify size 32
[37560.367597@3] hdmitx: audio: no update
[37560.367601@3] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37560.367603@3] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37560.367605@3] hdmitx: audio: aout notify rate 44100
[37560.367606@3] hdmitx: audio: aout notify size 32
[37560.367606@3] hdmitx: audio: no update
[37560.374845@1] aml_snd_m8_card aml_m8_snd.45: I2S playback enable
[37560.374861@1] aml_snd_m8_card aml_m8_snd.45: IEC958 playback enable
[37684.880184@0] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
[37684.880204@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
[37684.881378@0] aml_audio_hw: audio_set_aiubuf channel == 8
[37684.881390@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=8, same source mode(1)
[37684.881397@0] aml_spdif_dai: share the same clock
[37684.881407@0] aml_audio_hw: IEC958 PCM32
[37684.881415@0] hdmitx: audio: aout notify rate 44100
[37684.881420@0] hdmitx: audio: aout notify size 32
[37684.881425@0] hdmitx: audio: no update
[37684.881434@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[37684.881441@0] aml_snd_m8_card aml_m8_snd.45: 8ch PCM output->notify HDMI
[37684.881446@0] hdmitx: audio: aout notify rate 44100
[37684.881450@0] hdmitx: audio: aout notify size 32
[37684.881454@0] hdmitx: audio: no updateI have the same issu if I use DHCP or static IP.
The only way to fix it:
- disable and re-enable the ethernet controller over the gui
- reboot the box
Same Issu I had also in earlier versions on the WETEK hub boxes. With the WETEK Core boxes I haven't any problem. The WETEK Core boxes running 16 hours a day with 720p HD streaming.
g.
thomas