keymaps.xml not working after upgrade to LE11

After upgrade from LE9 to LE11 I run in to following problem.

In LE9 keyboard and remote shared the same actions but in LE11 only keyboard is working.

If I edit keymappings.xml and change <keyboard> to <remote> then the remote start to work for some parts.

The other thing that happens when changing from <keyboard> to <remote> is that I get a lot of errors on keys that are no longer valid as (like <a> to <z>)

So the question is can I get back and use only <keyboard> as in LE9 and

get the events from the remote to act as normal key codes.

My setup is:

Mapped keyboard keys in '/storage/.config/rc_keymaps/nec_yamaha_remote':

And action in '/storage/.kodi/userdata/keymaps/keymappings.xml

keymappings.xml.txt

nec_yamaha_remote.txt

I got events even using old format in '/storage/.config/rc_keymaps/nec_yamaha_remote'.

ir-keytable -t

Figured out a way to partly get my remote as my old LE9 setup by masking (stopping) eventlircd.

'systemctl mask eventlircd'

But the problem is, I need following after reboot:

udevadm trigger -v /sys/devices/pnp0/00:02/rc/rc0/input10/event10

systemctl restart kodi

Some kind of timing thing..

/usr/lib/udev/rules.d/70-infrared.rules run ir-keytable -a ... could be too late related to kodi.service but I don't know.

For who ever read this with same issue....

Seems that eventlircd grabbed kernel events (IR keys) from '/devices/pnp0/00:02/rc/rc0/input10/event10' and transfer stuff to a socket in Kodi.

Kodi then separated it as remote keys and that's why the need of chaining to <remote>.

Now without eventlircd my IR keys are the same as a keyboard keys, except above problem.

following '/storage/.config/autostart.sh' fixed the issue.

#/bin/sh

udevadm trigger -v /sys/class/rc/rc0

but still don't know where the root cause of problem is...

Yes,

It runs good now without eventlircd and with above autostart.

So I leave it for now..