CSI camera RPI

    Hello.

    LibreELEC 11

    CSI camera connected to RPI. How to add to MotionEye that works in Docker.

    Camera not showing up in libreelec system?

    addon Raspberry PI Tools installed

    uname -a

    Linux LibreELEC 6.1.19 #1 SMP Sat Mar 18 20:56:24 UTC 2023 armv7l GNU/Linux

    vcgencmd get_camera`

    supported=1 detected=1, libcamera interfaces=0

    v4l2-ctl --list-devices

    bcm2835-codec-decode (platform:bcm2835-codec):

    /dev/video10

    /dev/video11

    /dev/video12

    /dev/video18

    /dev/video31

    /dev/media2

    bcm2835-isp (platform:bcm2835-isp):

    /dev/video13

    /dev/video14

    /dev/video15

    /dev/video16

    /dev/video20

    /dev/video21

    /dev/video22

    /dev/video23

    /dev/media0

    /dev/media1

    Cannot open device /dev/video0, exiting.

    nano /flash/config.txt

    # SPDX-License-Identifier: GPL-2.0-or-later

    # Copyright (C) 2009-2014 Stephan Raue ([email protected])

    # Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)

    ################################################################################

    # Bootloader configuration

    # config.txt version v1 (do not remove or change this line!)

    ################################################################################

    # For more options and information see

    # http://rpf.io/configtxt

    ################################################################################

    # Default GPU memory split, 76MB are needed for H264 decoder

    gpu_mem=76

    # Enable I2C OLED

    dtparam=i2c1=on

    dtparam=i2c_arm=on

    enable_uart=1

    # Don't send initial active source message.

    # Avoids bringing CEC (enabled TV) out of standby and channel switch when

    # rebooting.

    hdmi_ignore_cec_init=1

    ################################################################################

    # Include distribution specific config file if it exists.

    ################################################################################

    [all]

    include distroconfig.txt

    # uncomment to enable infrared remote recevier connected to GPIO 18

    #dtoverlay=gpio-ir,gpio_pin=18

    # uncomment to enable analog audio output

    #dtparam=audio=on

    #audio_pwm_mode=1

    initramfs edid.cpio

    docker ccrisan/motioneye:master-armhf
    Code
    docker run --name="motioneye" \
    -p 8765:8765 -p 8081:8081 -p 81:81\
    --hostname="motioneye" \
    -v /var/run/localtime:/etc/localtime:ro \
    -v /storage/.config/motioneye:/etc/motioneye \
    -v /var/media/hdd2/motioneye:/var/lib/motioneye \
    -e TZ=Europe/Minsk \
    --restart="always" \
    --detach=true \
    ccrisan/motioneye:master-armhf
    Code
    docker pull openhorizon/mjpg-streamer-pi3:latest
    Code
    docker run --restart=always -it -d --privileged -p 8082:8080 openhorizon/mjpg-streamer-pi3 ./mjpg_streamer -o "output_http.so -w ./www" -i "input_raspicam.so -x 640 -y 480 -fps 10 -ex night"