
[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro
- afl1
- Thread is Unresolved
-
-
Just realise while connecting bluetooth headset to the KII box (latest build) audio in the movie not synchronised, is there any fix for that ? Delay quite noticeable... Device connecting Plantronics Legend.
-
Driver is correctly attached, issue is in tvheadend.
Code[ [email protected]] aml_dvb_init: aml dvb init[ [email protected]] aml_dvb_probe: probe amlogic dvb driver[ [email protected]] aml_dvb_probe: dmx rst ctl = ffffffc0650a9480[ [email protected]] aml_dvb_probe: asyncfifo rst ctl = ffffffc0650a9400[ [email protected]] aml_dvb_probe: ahbarb0 rst ctl = ffffffc0650a9d40[ [email protected]] aml_dvb_probe: uparsertop rst ctl = ffffffc0650a9dc0[ [email protected]] aml_dvb_probe: ts0: parallel[ [email protected]] aml_dvb_probe: ts0_control: 0x0[ [email protected]] dvbdev: DVB: registering new adapter (amlogic-dvb)[ [email protected]] aml_dvb_probe: Registered adpter: amlogic-dvb[ [email protected]] aml_dvb_dmx_init: demux0[ [email protected]] aml_dvb_dmx_init: demux1[ [email protected]] aml_dvb_dmx_init: demux2[ [email protected]] aml_dvb_asyncfifo_init: af:0 irq:51[ [email protected]] DMX: async fifo 0 buf size 524288, flush size 262144[ [email protected]] aml_dvb_asyncfifo_init: af:1 irq:57[ [email protected]] DMX: async fifo 1 buf size 524288, flush size 262144[ [email protected]] DVB FE: Init AVL6862 frontend 0[ [email protected]] i2c i2c-2: avl6862: found AVL6862 family_id=0x68624955[ [email protected]] i2c i2c-2: Load avl6862 firmware patch for DVB-S/S2 size=44000[ [email protected]] i2c i2c-2: avl6862 patch ver 2.0 build 20621[ [email protected]] i2c i2c-2: r848a: Rafael R848 successfully attached![ [email protected]] DVB FE: AVL6862 and R848 attached![ [email protected]] amlogic-dvb dvb.48: DVB: registering adapter 0 frontend 0 (Availink avl6862)...[ [email protected]] DVB FE: Frontend AVL6862 registred! -
Driver is correctly attached, issue is in tvheadend
Is that something that can be fixed?
-
Is that something that can be fixed?
Most likely not by you. I'll verify it in my new box and try to fix it.
-
@DjTeaser does the K1 Pro came with rcu? can you post some photos? where did you buy it?
sorry for the offtopic
I got it from here and it came with a rcu
-
thanks DjTeaser
-
The latest TVHeadend (8.1.111 version 4.2.2) from LibreELEC repository is buggy. Use my version 4.2.1 service.tvheadend42-8.1.112.zip.
-
The latest TVHeadend (8.1.111 version 4.2.2) from LibreELEC repository is buggy. Use my version 4.2.1 service.tvheadend42-8.1.112.zip.
-
I got it from here and it came with a rcu
Links to salers violate forum rules.
-
I added in #1 support for KI Pro. Box is running with same version for KI Plus/KII Pro, only it has own device tree blob.
Short review:
CPU S905D has same VPU as S905X/S912 (VP9 hw decoding and HDR).
RAM: 2 GB DDR4
Flash: 16 GB
Ethernet with build-in PHY for 10/100/1000.
WiFi/BT chip AP6225 with 2.4/5GHz and 4.1BT.
DVB build-in module with AVL6862 demodulator and Rafael R912 (compatible with R848) tuner ( same for all other models).
4x USB 2.0
Optical SPDIF
A/V jack
HDMI 2.0
-
Links to salers violate forum rules.
Sorry didn't know that. won't happen again.
Is someone here from the Netherlands and using ziggo in combination with tvheadend. I'm a bit of a noob on this. No matter what values i put in i cant get it to scan.
And does it where i insert my signal? is the screw thread one or the other one?
*EDIT* i think i have it!
Next mission, oscam for ccline
-
I have a problem with friends please help me i have setup libreelec disecue i have set up and found the channels but tvheadent client does not list the channel but i watch it from the blank computer but libreelec tv channel free list
-
I have a problem with friends please help me i have setup libreelec disecue i have set up and found the channels but tvheadent client does not list the channel but i watch it from the blank computer but libreelec tv channel free list
In TVHeadend Configuration->DVB Inputs->Services you have to map selected services. Then in Channel/EPG you can verify maped service and assign channel numbers.
-
thanks dear afl1
-
Hello afl1
using your LibreELEC-S905.arm-8.0-8.0.2a-I.img.gz I have freezes almost ervery 2 minutes whatching live tv.
Now I'm back to LibreELEC-S905.arm-8.0-8.0.1-devel-20170515144152-g6e79ad4-I.tar which is far better.
(Only short freezes every 30min)
Anyway I can't find a image which is solving freezing live tv finaly.
Is there maybe something I can do using settings?
-
Hello afl1
using your LibreELEC-S905.arm-8.0-8.0.2a-I.img.gz I have freezes almost ervery 2 minutes whatching live tv.
Now I'm back to LibreELEC-S905.arm-8.0-8.0.1-devel-20170515144152-g6e79ad4-I.tar which is far better.
(Only short freezes every 30min)
Anyway I can't find a image which is solving freezing live tv finaly.
Is there maybe something I can do using settings?
Without debug log I can't help you. In Kodi you have to enable debug logging and component-specific logging -> Video component.
BTW: Today I was watching French Open without any freez.
-
Hello everyone, I'm new to the LibreElec software. However i have an issue. I installed libreelec to my KII Pro, and was even able to install it to the nand. I can get it to boot from the nand, however i cant figure out how to get it to reboot into the TWRP recovery I have installed. Any help would be appreciated. Thanks.