Hi folks,
I have been using LE along time but hasn't upgraded since version 9. The reason is that I could not get LE 10 working with my graphics cards passthrough to the LE VM. I am using a computer with VMware ESXi 6.7, latest update. This all works very good with LE 9, but since LE 10 and also LE 11 I can't get it to work any more.
The video output, after starting the VM, is black and after a minute or so it get's al scrambled, green red and some yellow. No bootup logo en kodi menu's. I can SSH into the VM, so it runs, only no output. I am using a AMD Radeon RX 550 with a Intel i3-8100 on a Gigabyte B360M-D3H motherboard.
If I boot the VM with a virtual VMware graphics card al works fine, but the output is ofcourse not on the TV. When I disable the virtual VMware graphics card there is no output at all.
So it is (still) working on LE9, but it doesn't work on LE10 or LE11.
some info from the LE11 VM:
lspci -nnk
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] [1002:699f] (rev c7)
DeviceName: pciPassthru0
Subsystem: ASUSTeK Computer Inc. Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] [1043:0513]
Kernel driver in use: amdgpudmesg | grep amdgpu
[ 0.488285] [drm] amdgpu kernel modesetting enabled.
[ 0.488318] amdgpu: CRAT table not found
[ 0.488320] amdgpu: Virtual CRAT table created for CPU
[ 0.488328] amdgpu: Topology: Add CPU node
[ 0.489004] amdgpu 0000:03:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment)
[ 0.660412] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM
[ 0.660426] amdgpu: ATOM BIOS: 115-C994PI0-102
[ 0.660450] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 0.660452] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 0.660469] amdgpu 0000:03:00.0: amdgpu: PCIE atomic ops is not supported
[ 0.660576] amdgpu 0000:03:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 0.660578] amdgpu 0000:03:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 0.660751] [drm] amdgpu: 4096M of VRAM memory ready
[ 0.660753] [drm] amdgpu: 3072M of GTT memory ready.
[ 0.661998] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[ 0.950040] kfd kfd: amdgpu: skipped device 1002:699f, PCI rejects atomics 730<0
[ 0.950053] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[ 0.954772] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm
[ 0.954979] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:03:00.0 on minor 0
[ 1.979850] amdgpu 0000:03:00.0: [drm:amdgpu_ib_ring_tests] *ERROR* IB test failed on uvd (-110).
[ 2.086025] [drm:amdgpu_device_delayed_init_work_handler] *ERROR* ib ring test failed (-110).
[ 2.087455] fbcon: amdgpudrmfb (fb0) is primary device
[ 2.169633] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 17.793197] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 27.819872] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 37.846600] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 47.873152] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 57.899833] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 67.926468] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 77.953167] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 87.979828] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovered
[ 98.219837] [drm:amdgpu_job_timedout] *ERROR* ring gfx timeout, but soft recovereI really would like to fix it because some of the add-ons stops working on LE 9.
