It's an S922X device so perhaps try the Beelink GT-King file, they're both based on the W400 reference design. What WiFi chip is inside?
It's an S922X device so perhaps try the Beelink GT-King file, they're both based on the W400 reference design. What WiFi chip is inside?
With Beelink GT-King working as with Ugoos AM6 Plus device tree.
Wi-Fi - not working
BT - working
Remote control via USB dongle - not working (USB 3.0 ports not working)
LAN - working
HDMI CEC - working
I am not sure what command can be used to see what WiFi chip. I asked ChatGPT what WiFi chip is used, I got the answer that Broadcom BCM4356.
I used dmesg | paste maybe the http://ix.io/4vgv results will help to solve the problem?
cd /storage/.update
wget https://chewitt.libreelec.tv/testing/LibreELEC-AMLGX.arm-11.0.2.tar
reboot^ please update to that image and share the boot log again. The WiFi card appears to be the newer BCM43752 chip (as that's what the BT driver loaded firmware for) but it's odd the kernel doesn't show any attempt to probe SDIO. I can ask the Minix devs for the Android dts and schematics to look at.
Codecd /storage/.update wget https://chewitt.libreelec.tv/testing/LibreELEC-AMLGX.arm-11.0.2.tar reboot^ please update to that image and share the boot log again. The WiFi card appears to be the newer BCM43752 chip (as that's what the BT driver loaded firmware for) but it's odd the kernel doesn't show any attempt to probe SDIO. I can ask the Minix devs for the Android dts and schematics to look at.
Boot log http://ix.io/4vkm
The boot log shows the kernel probed SDIO and loaded firmware this time so there should be a "wlan0" device listed if you run "ifconfig" but there are ieee80211 errors. See if "iwconfig wlan0 power off" stops them? .. and also try to create a WiFi connection.
The boot log shows the kernel probed SDIO and loaded firmware this time so there should be a "wlan0" device listed if you run "ifconfig" but there are ieee80211 errors. See if "iwconfig wlan0 power off" stops them? .. and also try to create a WiFi connection.
After reboot sometime not working CEC and still not working Wi-Fi. Again I rebooting device and CEC working, but ifconfig not show wlan0. Again rebooting and CEC work, ifconfig show vlan0, but in network not showing my home WiFi SID. I tried to disable LAN connection, but but wifi still not work. Also I tried via command line scan wifi but no successfully.
LibreELEC:~ # connmanctl
connmanctl> agent on
Agent registered
connmanctl> scan wifi
connmanctl> services
*AO Wired ethernet_a01e0b11eddc_cable
connmanctl>
Check/set the Wireless Regulatory Domain setting in LE network settings for your country. Perhaps the router is advertising on frequencies that are not visible under the default config. Then clean boot and run "journalctl | paste" and share the URL.
