Translator:
This is an old problem that has been appearing since version 10.0.1 and above.
As usual I had to go back to 10.0.0.
Editing the config file gives s**t:
hdmi_group=1
hdmi_mode=16
LibreELEC 11.0.1, RPi4, fresh install, no picture
-
drrak -
May 2, 2023 at 5:20 PM -
Thread is marked as Resolved.
- Go to Best Answer
-
HDMI modes go to cmdline.txt now.
-
Option a): You can read / write the microSD's VFAT partition on a PC. Edit /LIBREELEC/cmdline.txt.
Option b): Make sure SSH is activated on the GUI. Then login, and edit /flash/cmdline.txt the same way like config.txt.
Add video=HDMI-A-1:1920x1080M@60 as a parameter to the existing line.
-
- Best Answer
Try with video=HDMI-A-1:1920x1080@60D
-
Try with video=HDMI-A-1:1920x1080@60D
OMG It works!!!
Finally I can use the latest version.
Thanks a lot.
