[RPi] LE 10.0.4 Stuck on splash screen, works on different display

    Logs are attached.

    * RPi 4 8Gb

    * Just installed LE 10.0.4 from RPi imager.

    I was able to get it running using my monitor, and I was able to connect everything to the network, and got to make streaming via Samba work as well.

    So, I thought everything was good to go and I brought my RPi to my Smart TV. It gets stuck on the boot screen.

    I tried going back to the monitor setup, and it still works as expected.

    I only have a mouse connected to the RPi.

    Does anyone have a solution for this?

    Thank you.

    HDMI is connected to port 1, and needs to be in port 0 nearest the power connector. Also note that 99% of users have no need to force 4K60 modes since there is very little 4K media in 4K60 format.

    NB: If you reinstall the banned add-ons shown in the first log, further support will be refused.

    After connecting it to port 0, it seems to be in a restart loop.. logs: http://ix.io/4q9C

    Edit: here is what I got after running pastecrash: http://ix.io/4q9D

    Not sure if this is any different from pastekodi logs.

    Oh, I will revert the settings then. Thanks!

    Noted, will not try to use those again.

    Edited once, last by tigger (March 7, 2023 at 11:25 AM).