LE10 & DVBSky T982

    Just upgraded to LE10 and then re-installed TVHeadend4.3, all looked good, my DVBSky T982 was detected and was able to watch tv on DVB-T2 & DVB-S2.

    But after a reboot, the devices are gone from the TV Adapters. I stopped the service removed the addon_data and started it again, but still, my TV Adapters are empty :( I'm stuck ... please help!!

    Would anyone be able to give me some advice on how to get it working again, I assume they should work, as it worked at the beginning.

    Details as follows

    LibreELEC 10.0.0 (kernel: Linux 5.10.47) Build 19.1.0 Compiled 2021-08-10

    GPU: AMD KABINI (DRM 2.5.0, 5.10.47, LLVM 11.0.1)

    CPU: AMD A4-5000 APU with Radeon HD Graphics, 798 Mhz

    Memory: 8GB

    dmesg|paste: http://ix.io/3DPi

    Would anyone have any advice? thank you.

    Just updated to 10.0.1 and my tuners are back ... mostly. They work fine from a cold boot or resume from standby, however, if I just reboot the system they are gone? Not a massive issue, as I can shut down and power up again, but would be interested if anyone has an idea why it would do this.

    Thanks!

    In your log all DVB Driver Addons are enabled, this is not supported:

    Code
    [    4.774943] kernel-overlays-setup: setup base modules
[    4.842516] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.10.47
[    4.875443] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[    4.876807] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[    4.877791] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[    4.914419] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/5.10.47
[    4.914550] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.digital_devices.conf
[    4.918921] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.digital_devices/lib/modules/5.10.47
[    4.919035] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf
[    4.969748] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/5.10.47

    Create a new log if it is still he case.

    Quote from mglae

    In your log all DVB Driver Addons are enabled, this is not supported

    Ah, that explains it! I disabled them all and then did the update to 10.0.1. So possibly the upgrade was a coincidence.

    Thanks for the info, it's still working.