after last update driver intel on windows i can do YCbCr 4:2:0 10-bit
what about for driver linux ?
Intel NUC 8th Gen: SMP’s HDR build: Atmos Skip fix?
-
HomerJau -
October 22, 2021 at 8:13 PM -
Thread is marked as Resolved.
-
-
LibreELEC-Generic.x86_64-11.0-devel-20211020222733-d3745e7.img.gz
This is from Oct. 20 master branch (Kodi 20) with the Atmos patch included.
Hi smp,
I think this link may be broken - do you have a link to your latest build?
Thanks!
-
The link should work now.
-
The link should work now.
Thanks so much!
-
The link should work now.
Hi smp, the download link for the HDR build is broken again. Can you, please, update it so I can try it too? Thanks!
-
-
Hi -
I am running a NUC8i7BEH, TV does not pick up video coming as HDR, same build on a NUC11 works and tv switches to HDR mode. Is there anything to look for in the logs, I can see the following:
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - setting connector colorspace to Default
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CRenderManager::CreateRenderer - using renderer: vaapi
2022-02-23 18:25:43.921 T:718 DEBUG <general>: LinuxRendererGLES::Configure: fps: 23.976
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - setting connector colorspace to BT2020_RGB
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - display_primaries[0].x: 34000
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - display_primaries[0].y: 16000
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - display_primaries[1].x: 13250
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - display_primaries[1].y: 34500
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - display_primaries[2].x: 7500
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - display_primaries[2].y: 3000
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - white_point.x: 15635
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - white_point.y: 16450
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - max_display_mastering_luminance: 4000
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - min_display_mastering_luminance: 50
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - max_cll: 1000
2022-02-23 18:25:43.921 T:718 DEBUG <general>: CWinSystemGbm::SetHDR - max_fall: 362
2022-02-23 18:25:43.921 T:718 DEBUG <general>: LinuxRendererGLES::Configure: HDR passthrough: on
-
Fixed my issue, I have a TCL 55r615, had to change the hdmi input on the TV to use 2.0 (labeled as standard) :
Setting the HDMI® mode (4K models only)
On 4K (UHD) TVs, you can independently configure each HDMI® input to match the capabilities of the connected device. From the Home screen menu, navigate to Settings > TV inputs, and then select an enabled HDMI® input. Next, select HDMI mode
and then select one of the following settings:
• Auto – Let the TV determine the best setting. Use this option unless your HDMI®
device does not correctly communicate its HDMI® version compatibility.
• HDMI 1.4 – Configure the input for compatibility with HDMI® version 1.4, which supports a maximum refresh rate of 30 Hz at full UHD resolution. Most HDMI®
devices will work correctly with the TV in this mode.
• HDMI 2.0 – Configure the input for compatibility with HDMI® version 2.0, which supports a maximum refresh rate of 60 Hz at full UHD resolution. You must use this mode to view HDR content from the device connected to this HDMI® input. However, note that many older HDMI® devices do not work correctly when the TV’s HDMI® input is set to this mode.Thank you SMP for this build!
