Tested on RTX 3050 & Z390 ITX & i7 8600 = HLG & HDR & DV All Working
The only issue I have is that I need to use the DisplayPort on the graphics card to connect to an AV receiver, so that the audio can be processed separately from the display. However, it seems that the system turn off all other ports whenever a display is connected via HDMI—even the HDMI ports on the Intel motherboard stop working.
Direct connect to AVR not good for me limit 4K@30 not @50 or 60
I will check, thanks for the log, for HLG it use the native Kodi playback and behavior, do you have the same issue with the latest x86 build?
HLG working on latest x86 if i disable "Use HEVC VAAPI" & no have issue restart system
ok, i get rtx 3050 used, and DV & HDR work fine!
i have issue with HLG when try Channel via PVR addon
when playing TV channels: the screen turns green, and sometimes the system restarts when a channel is launched. The problem goes away when I disable "Use HEVC VAAPI"
but I need to keep it enabled for other types of video content; furthermore, without it, Dolby Vision cannot be played.
what about for rtx 3050?
Display MoreComplicated to answer that. It depends of the feature that you are interested in.
- For native DV a N100 can handle the workload including FEL reconstruction, the only limitation at this moment is 60fps playback, and you will have stutter if you open a GUI element during the playback
- For HDR10 to DV or DV to HDR10 conversion you need a strong GPU
At first glance I think AMD iGPU are more capable for the same price and are a better option. I haven't thoroughly tested AMD CPUs yet, and I haven't had enough feedback to make a genuine recommendation. Plus, I'm constantly optimizing, even though I'm running out of new levers to implement
My ultimate goal is for the N100 to handle everything including conversions, but I'm afraid I won't be able to optimize at this point
So, will it be possible to use a dedicated graphics card used (as Intel Arc B570 or RX 7600 ) to Dolby Vision & HDR-to-DV?
What tested hardware do you recommend for dv intel?
is any way to port dv on pc to LE ?
Display More@SM, I have had this issue at LE 11 and now LE12, I have tried diff ver's and various settings nothing seems to resolved it
When I changed channel it flickers for fow seconds before it changesI wonder if the a know issue or its just me alone that have such issue as I have search the forum, no one seems to complain about it
What I done is initiate a log debug if this will captured where it issue lies
Loading and changing channels in LE 10 is very snappy, no lagging of flickering at all
here is the url please any suggestions thanks
issue fixed on this build: LibreELEC (ae-fork)
[ URL to Piracy infested fork removed ]
and HDR & HLG work better If i disable hardware acceleration (VAAPI)
Try this build.
i try it
HLG work in some channel and other not work,
and same issue when change channel
HDR/HDR10/HLG is already supported in LE and Kodi subject to the hardware supporting them; which is complicated on NUC type devices with LSPCON chips as those can modify the capabilities of the "HDMI" output path and prevent a universal/simple answer to what's supported. There are also bugs in Intel drivers that muddy the waters.
DV is already supported in Kodi (on Android with appropriately licensed hardware). However on Linux you will also need licensed hardware (so handling exists in silicon) and FFMpeg support. The latter appears to be progressing, but it will be a while before all pieces are version aligned. Kodi 'P' is about to bump from FFMpeg 6.0 to 7.0 and those patches are merged to FFMpeg master so should be in FFMpeg 8.x (or something post v7.0 at least) and there's likely to be more patching needed.
And for purists: There will never be an open-source implementation of DV to Dolby standards because the tooling and technical info needed for that require sign-up to their license regime (which is the polar opposite of open-source). So open-source DV support will always be limited to making something that looks nice on screen.
Thank you for the quick response and clarification,
In fact, I tried the LE12 for HLG from addon PVR DVBViewer, (4K & 50Hz) but i have black screen in some channel and signal HLG not work in other channel
i See this card from intel support Dolby Vision
FFmpeg Makes Progress On Dolby Vision Support - Phoronix
Is there a chance that Dolby Vision & HDR will work with the LE via FFmpeg?
Or is the issue very complicated with Linux?
i want ask for LibreELEC 12 Beta2
- is support DRM decoder and working for Generic build ?
- Support HLG DVB... ?
try close option for DRM PRIME in player setting
Hi
i have Ubuntu 20.04.6 LTS on WSL2 windows 10
i try build LibreELEC.tv-11.95.1 with Building (Basics)
but before complete i have error:
g++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
[2661/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaRISCVVectorLookup.cpp.o
[2662/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaPseudoObject.cpp.o
[2663/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaOverload.cpp.o
[2664/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaExprCXX.cpp.o
[2665/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaDeclCXX.cpp.o
[2666/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaStmt.cpp.o
[2667/3447] Building CXX object tools/clang/lib/Sema/CMakeFiles/obj.clangSema.dir/SemaOpenMP.cpp.o
ninja: build stopped: subcommand failed.
FAILURE: scripts/build llvm:host during make_host (default)
*********** FAILED COMMAND ***********
ninja ${NINJA_OPTS} ${PKG_MAKE_OPTS_HOST}
**************************************
FAILURE: scripts/build llvm:host has failed!>>> llvm:host seq 79 >>>
[319/325] [FAIL] build llvm:host
make: *** [Makefile:10: image] Error 1
i don't have this issue when try old build v11.0.1
how fix this issue?
you can via SFTP login
try filzilla
Zuma Here is a fancy set of instructions https://www.artembutusov.com/libreelec-entware-ng-installation/ and the last comment is even more creative and does not need to change the image.
ya, i read this, only need create folder /opt in root
this point only hard for me, Otherwise, it's easy
thanks
