Hi all,
All of a sudden my tv-adapter is not found anymore. I ran dmesg but really don't know what to try next. Any help appreciated.
NB. I have a T230C DVB-C MyGica adapter on Libre-elec OS with tv-headend on a rapsberry pi 3.
Code
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.127 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Tue Jul 6 19:08:28 CEST 2021
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x2f800000
[ 0.000000] On node 0 totalpages: 196608
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4ac with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632
[ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=2311-4211 disk=UUID=69a6af94-e21a-450d-bf5e-fcc08d992566 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 752516K/786432K available (9216K kernel code, 697K rwdata, 2012K rodata, 5120K init, 529K bss, 25724K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xb0800000 - 0xff800000 (1264 MB)
[ 0.000000] lowmem : 0x80000000 - 0xb0000000 ( 768 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (5120 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 698 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 530 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 30004 entries in 88 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000017] Switching to timer-based delay loop, resolution 52ns
[ 0.000275] Console: colour dummy device 80x30
[ 0.000300] console [tty0] enabled
[ 0.000351] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[ 0.000369] pid_max: default: 32768 minimum: 301
[ 0.000628] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000647] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001578] CPU: Testing write buffer coherency: ok
[ 0.002121] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002939] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003123] rcu: Hierarchical SRCU implementation.
[ 0.005905] smp: Bringing up secondary CPUs ...
[ 0.006984] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.008093] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009134] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009277] smp: Brought up 1 node, 4 CPUs
[ 0.009292] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[ 0.009301] CPU: All CPU(s) started in HYP mode.
[ 0.009310] CPU: Virtualization extensions available.
[ 0.010280] devtmpfs: initialized
[ 0.025333] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.025606] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.025632] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.026271] pinctrl core: initialized pinctrl subsystem
[ 0.027299] NET: Registered protocol family 16
[ 0.031406] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.036635] cpuidle: using governor ladder
[ 0.036681] cpuidle: using governor menu
[ 0.037313] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.037324] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.037553] Serial: AMBA PL011 UART driver
[ 0.041600] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.050204] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-15 11:44, variant start_x
[ 0.053550] raspberrypi-firmware soc:firmware: Firmware hash is 82f9bb929ce2186eb1824178c1ae82902ad6275c
[ 0.095438] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.097492] SCSI subsystem initialized
[ 0.097730] usbcore: registered new interface driver usbfs
[ 0.097791] usbcore: registered new interface driver hub
[ 0.097913] usbcore: registered new device driver usb
[ 0.099618] clocksource: Switched to clocksource arch_sys_counter
[ 0.203033] FS-Cache: Loaded
[ 0.214220] NET: Registered protocol family 2
[ 0.215055] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.215098] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.215213] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.215403] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.215559] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.215610] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.215879] NET: Registered protocol family 1
[ 0.216589] RPC: Registered named UNIX socket transport module.
[ 0.216599] RPC: Registered udp transport module.
[ 0.216609] RPC: Registered tcp transport module.
[ 0.216618] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.237513] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.240084] Initialise system trusted keyrings
[ 0.240304] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.250569] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.251428] FS-Cache: Netfs 'nfs' registered for caching
[ 0.252052] NFS: Registering the id_resolver key type
[ 0.252093] Key type id_resolver registered
[ 0.252103] Key type id_legacy registered
[ 0.252124] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.252610] FS-Cache: Netfs 'cifs' registered for caching
[ 0.260776] Key type asymmetric registered
[ 0.260791] Asymmetric key parser 'x509' registered
[ 0.260863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.260876] io scheduler noop registered (default)
[ 0.260888] io scheduler deadline registered
[ 0.261076] io scheduler cfq registered
[ 0.261088] io scheduler mq-deadline registered
[ 0.261099] io scheduler kyber registered
[ 0.261268] io scheduler bfq registered
[ 0.266087] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.296153] Console: switching to colour frame buffer device 170x48
[ 0.313984] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1360x768
[ 0.316536] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.316978] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.317622] vc-sm: Videocore shared memory driver
[ 0.330379] brd: module loaded
[ 0.330538] loop: module loaded
[ 0.353080] usbcore: registered new interface driver rtsx_usb
[ 0.353900] Loading iSCSI transport class v2.0-870.
[ 0.354396] iscsi: registered transport (tcp)
[ 0.354878] libphy: Fixed MDIO Bus: probed
[ 0.354922] tun: Universal TUN/TAP device driver, 1.6
[ 0.355193] usbcore: registered new interface driver lan78xx
[ 0.355249] usbcore: registered new interface driver dm9601
[ 0.355325] usbcore: registered new interface driver smsc95xx
[ 0.355368] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.383330] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.583634] Core Release: 2.80a
[ 0.583647] Setting default values for core params
[ 0.583677] Finished setting default values for core params
[ 0.784061] Using Buffer DMA mode
[ 0.784072] Periodic Transfer Interrupt Enhancement - disabled
[ 0.784081] Multiprocessor Interrupt Enhancement - disabled
[ 0.784093] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.784115] Dedicated Tx FIFOs mode
[ 0.784630] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = af904000 dma = 0xef904000 len=9024
[ 0.784659] FIQ FSM acceleration enabled for :
[ 0.784659] Non-periodic Split Transactions
[ 0.784659] Periodic Split Transactions
[ 0.784659] High-Speed Isochronous Endpoints
[ 0.784659] Interrupt/Control Split Transaction hack enabled
[ 0.784671] dwc_otg: Microframe scheduler enabled
[ 0.784738] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.784748] WARN::hcd_init_fiq:458: FIQ ASM at 80730bb4 length 36
[ 0.784759] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000
[ 0.784776] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.784815] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.784860] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.784912] Init: Port Power? op_state=1
[ 0.784922] Init: Power Port (0)
[ 0.785275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.785290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.785304] usb usb1: Product: DWC OTG Controller
[ 0.785317] usb usb1: Manufacturer: Linux 4.19.127 dwc_otg_hcd
[ 0.785329] usb usb1: SerialNumber: 3f980000.usb
[ 0.786007] hub 1-0:1.0: USB hub found
[ 0.786084] hub 1-0:1.0: 1 port detected
[ 0.786864] dwc_otg: FIQ enabled
[ 0.786874] dwc_otg: NAK holdoff enabled
[ 0.786883] dwc_otg: FIQ split-transaction FSM enabled
[ 0.786897] Module dwc_common_port init
[ 0.787195] usbcore: registered new interface driver usb-storage
[ 0.787400] mousedev: PS/2 mouse device common for all mice
[ 0.787838] i2c /dev entries driver
[ 0.789706] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.789976] bcm2835-cpufreq: min=600000 max=1200000
[ 0.790665] sdhci: Secure Digital Host Controller Interface driver
[ 0.790674] sdhci: Copyright(c) Pierre Ossman
[ 0.791211] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 0.791817] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.792017] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.795166] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.795275] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.796788] usbcore: registered new interface driver usbhid
[ 0.796793] usbhid: USB HID core driver
[ 0.797336] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.798493] [vc_sm_connected_init]: start
[ 0.807959] [vc_sm_connected_init]: end - returning 0
[ 0.810379] NET: Registered protocol family 10
[ 0.811605] Segment Routing with IPv6
[ 0.811692] NET: Registered protocol family 17
[ 0.811838] Key type dns_resolver registered
[ 0.812242] Registering SWP/SWPB emulation handler
[ 0.813016] Loading compiled-in X.509 certificates
[ 0.821452] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.821548] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.823691] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.823698] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 0.850036] sdhost: log_buf @ (ptrval) (ef907000)
[ 0.887798] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.889432] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.891116] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.894083] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.897781] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.899710] console [netcon0] enabled
[ 0.899719] netconsole: network logging started
[ 0.899729] of_cfs_init
[ 0.899779] of_cfs_init: OK
[ 0.923781] Freeing unused kernel memory: 5120K
[ 0.923982] Run /init as init process
[ 0.954162] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.957077] mmc0: new high speed SDHC card at address 0001
[ 0.958587] mmcblk0: mmc0:0001 SD16G 29.2 GiB (quirks 0x80000000)
[ 0.961833] mmcblk0: p1 p2
[ 0.967722] random: fast init done
[ 0.996410] Indeed it is in host mode hprt0 = 00021501
[ 1.005158] Checking disk(s): UUID=2311-4211 UUID=69a6af94-e21a-450d-bf5e-fcc08d992566
[ 1.071882] mmc1: new high speed SDIO card at address 0001
[ 1.179639] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.179741] Indeed it is in host mode hprt0 = 00001101
[ 1.379869] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 1.379881] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.380316] hub 1-1:1.0: USB hub found
[ 1.380385] hub 1-1:1.0: 5 ports detected
[ 1.437308] fsck: CP437: Invalid argument
[ 1.437447] fsck: fsck.fat 4.1 (2017-01-24)
[ 1.437625] fsck: /dev/mmcblk0p1: 224 files, 17999/65501 clusters
[ 1.437832] fsck: STORAGE: clean, 13222/7514112 files, 5102627/30050304 blocks
[ 1.659640] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.750056] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 1.750077] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.752911] smsc95xx v1.0.6
[ 1.805277] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:68:7e:db
[ 1.824675] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.295686] systemd[1]: System time before build time, advancing clock.
[ 2.304786] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 2.305276] systemd[1]: Detected architecture arm.
[ 2.309311] systemd[1]: Set hostname to <LibreELEC>.
[ 2.311405] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 2.496515] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.497093] systemd[1]: Listening on Journal Socket.
[ 2.497716] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.502296] systemd[1]: Mounting Kernel Debug File System...
[ 2.502396] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.505530] systemd[1]: Starting Wait For Kernel Time Synchronized...
[ 2.520672] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 2.520848] systemd[1]: Reached target RPC Port Mapper.
[ 2.521228] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.687838] kernel-overlays-setup: setup base modules
[ 2.752281] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.127
[ 2.792218] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 2.792417] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[ 2.793534] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[ 2.874127] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.127
[ 2.874254] kernel-overlays-setup: running depmod
[ 5.632252] kernel-overlays-setup: done
[ 5.665715] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
[ 5.665724] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 5.834734] systemd-journald[208]: Received request to flush runtime journal from PID 1
[ 6.439345] random: crng init done
[ 6.439357] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.546670] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 7.611932] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.650662] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.676539] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 7.676726] usbcore: registered new interface driver brcmfmac
[ 7.687893] Console: switching to colour dummy device 80x30
[ 8.031407] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.031495] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 8.032126] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 8.622505] uart-pl011 3f201000.serial: no DMA platform data
[ 8.637823] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 8.644946] 8021q: 802.1Q VLAN Support v1.8
[ 10.185288] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 13.360239] Bluetooth: Core ver 2.22
[ 13.360309] NET: Registered protocol family 31
[ 13.360315] Bluetooth: HCI device and connection manager initialized
[ 13.360332] Bluetooth: HCI socket layer initialized
[ 13.360342] Bluetooth: L2CAP socket layer initialized
[ 13.360368] Bluetooth: SCO socket layer initialized
[ 13.363813] Bluetooth: HCI UART driver ver 2.3
[ 13.363825] Bluetooth: HCI UART protocol H4 registered
[ 13.363938] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.364132] Bluetooth: HCI UART protocol Broadcom registered
