I'm a bit at a loss how to tackle the following problem: I use WinTV dualHD DVB-T2 receiver now since quite a while. In the past I used LePotato Amlogic device, but since the kernel did not properly support the DVB-T2 stick, I had a Raspberry Pi 3 running with a then up-to-date 4.19 kernel/Raspbian Buster and tvheadend on it, and subscribed to that from LePotato. That worked stable and very well. Only thing that annoyed me was that I needed to waste power on two devices, and when Raspberry Pi 4 came out, I switched to it and attached the DVB-T2 stick to it, with immediate success.
But ever since I have the problem that I have a lot more data errors, which result in image and/or audio glitches. I suspected power issues and now put a powered USB hub inbetween, and it currently seems as if it is better, but I still have not nearly the same stability as I had with the Raspberry Pi 3.
I've also tried all three DVB driver packeges, there's basically no difference.
I've exchanged cables, no difference.
I even have two of the receivers and changed them, no difference.
In dmsg I find repeated entries like this:
I'm atually considering putting the Raspberry Pi 3 back into my network... For testing I just did, and the ic2-errors do not show up the the Pi 3's dmesg...
Any help appreciated!