New ext4 partition on 2TB HDD won't automount at startup but manualy.
Libreelec version : 9.26 - Generic (AMD / Intel / nVidia)
# parted -l
...
Model: ATA ST2000DM001-1CH1 (scsi)
Disk /dev/sdd: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 2000GB 2000GB ext4 msftdata
#blkid
/dev/sda1: LABEL="Seagate_3TB" UUID="xxxxxxxxxxxxxxxxx" TYPE="ext4" PARTUUID="xxxxxxxxxxxxxxxxxxx"
/dev/sdb1: SEC_TYPE="msdos" LABEL_FATBOOT="System" LABEL="System" UUID="xxxxxxxxxxx" TYPE="vfat" PARTUUID="xxxxxxxxxxxx"
/dev/sdb2: LABEL="Storage" UUID="xxxxxxxxxxxxxxd" TYPE="ext4" PARTUUID="xxxxxxxxxxxxxxxx"
/dev/sdc1: LABEL="WD_2TB" UUID="xxxxxxxxxxxxxxxxxx" TYPE="ext4" PARTLABEL="WD_2TB" PARTUUID="xxxxxxxxxxxxxxxxxxxxxxx"
/dev/loop0: TYPE="squashfs"
# mount
...
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
/dev/sdc1 on /var/media/WD_2TB type ext4 (rw,nosuid,nodev,noexec,noatime)
/dev/sda1 on /var/media/Seagate_3TB type ext4 (rw,nosuid,nodev,noexec,noatime)
Manualy mount from command line :
# mkdir -p /media/ST_2T
# mount /dev/sdd1 /var/media/ST_2TB -o nosuid,nodev,noexec,noatime
# mount
....
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
/dev/sdc1 on /var/media/WD_2TB type ext4 (rw,nosuid,nodev,noexec,noatime)
/dev/sda1 on /var/media/Seagate_3TB type ext4 (rw,nosuid,nodev,noexec,noatime)
/dev/sdd1 on /var/media/ST_2TB type ext4 (rw,nosuid,nodev,noexec,noatime)
What's wrong ?