USB tuner sticks not seen in TVheadend

NotYourAverageAl · January 8, 2020 at 8:04 AM

Hi guys hoping to get some help with an old usb dvb-t stick; an Elgato eyetv go usb tuner.
I cant see the usb in TvHeadend. Not sure if the error is caused by the line

Code

[   59.505406] as10x_usb: error during firmware upload part2

dmesg shows this. Would appreciate any help

Code

[   58.932058] usb 1-1.1.2: new high-speed USB device number 9 using dwc_otg
[   59.027180] usb 1-1.1.2: New USB device found, idVendor=0fd9, idProduct=002c,                                                                              bcdDevice= 1.00
[   59.027193] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumb                                                                             er=3
[   59.027201] usb 1-1.1.2: Product: EyeTV DTT Dlx
[   59.027209] usb 1-1.1.2: Manufacturer: Elgato
[   59.027217] usb 1-1.1.2: SerialNumber: 000100304023177
[   59.098856] as10x_usb: device has been detected
[   59.099361] dvbdev: DVB: registering new adapter (Elgato EyeTV DTT Deluxe)
[   59.108436] usb 1-1.1.2: DVB: registering adapter 0 frontend 0 (Elgato EyeTV                                                                              DTT Deluxe)...
[   59.201396] as10x_usb: firmware: as102_data1_st.hex loaded with success
[   59.505406] as10x_usb: error during firmware upload part2
[   59.505454] Registered device Elgato EyeTV DTT Deluxe
[   59.506217] usbcore: registered new interface driver Abilis Systems as10x usb 
driver

Display More

**Iridium** · January 8, 2020 at 5:25 PM Official Post

Which DVB driver module did you load? If the default, try some of the others, It might work

NotYourAverageAl · January 9, 2020 at 10:35 AM

Quote from Iridium

Which DVB driver module did you load? If the default, try some of the others, It might work

Hi @Iridium how would I go about doing this on libreelec?

I'd appreciate you pointing in some direction and Ill read up. Thanks

**CvH** · January 9, 2020 at 10:55 AM Official Post

Do you use an Raspberry Pi ?

you could try to add dwc_otg.fiq_enable=0 dwc_otg.fiq_fsm_enable=0 dwc_otg.nak_holdoff=0 to your cmdline.txt at your SD card

pls make a backup from the cmdline.txt before !

NotYourAverageAl · January 9, 2020 at 12:49 PM

I am on a rpi3 and wow, that worked great.. i can see the usb stick now and tvheadend is working perfectly. Thanks

Mind explaining what happened?

**CvH** · January 9, 2020 at 6:31 PM Official Post

The not that good usb hw at the RPi combined with a not that good usb hw at the dvb device creates random problems. The commands above disable some fixes at the kernel that has usually working well at proper hw.

So it's a bit hit and miss.

But great to hear that it works.

USB tuner sticks not seen in TVheadend

Similar Threads

Tvheadend does scan mux failed

[Libreelec 9.0.2] Wetek Play 2 - Xbox Tuner (Expected to work or not)

Minisatip Configuration Help for Newbie Request