Hallo an alle,
ist es möglich unter LibreElec oscam zu betreiben, installieren?. Wenn ja wie mache ich das richtig. Habe davon keine Ahnung
is it possible to operate under LibreElec oscam, install ?. If so, how do I do it right? I have no idea
Gruß
daniel
Ja, es ist möglich.
Install Oscam from LibreELEC addons, then configure it according to your service provider. Google is your friend for the last part.
bei mir ist kein oscam unter den addons zu finden, muss ich dort eine neue Adresse hinzufügen?
Add-ons, install from repository, LibreELEC, services, Oscam ?
Danke, habe gefunden, wollte gerne wissen in welchen Verzeichniss befinden sich die oscam.conf, oscam.server, und andere ich möchte das einstellen als Server für HD01 Karte im meinem Haus. Könntest du awiouy mir helfen bei den Einstellungen ?. Danke für deine Hilfe
Thanks, I found, would like to know in which directory are the oscam.conf, oscam.server, and others I would like to set as a server for HD01 card in my house. Could you awyouy help me with the settings? Thank you for your help
The configuration files are in /storage/.kodi/userdata/addon_data/service.softcam.oscam.
You can also access them via SMB at /userdata/addon_data/service.softcam.oscam.
Configuration depends on your card reader and your service provider.
Best would therefore be to get help from someone in a context similar to yours.
Google will probably guide you to a configuration that fits your needs.
danke, das habe ich schon gefunden, aber ich glaube LibreElec erkennt nicht mein USB SmartReader (Argolis ), muss ich spezielle treiber installieren?, wie kann ich testen ob mein USB Smart Reader richtig erkannt wird?
Thanks, I've already found, but I think LibreElec does not recognize my USB SmartReader (Argolis), I need to install special drivers ?, how can I test if my USB Smart Reader is recognized correctly?
Smargo?
ja usb smargo
Try with:
protocol = smargo
device = /dev/ttyUSB0
leider bekomme solche Fehler
(main) System name = Linux
(main) Host name = LibreELEC
(main) Release = 4.19.66
(main) Version = #1 SMP Mon Sep 2 19:12:01 EDT 2019
(main) Machine = armv7l
(main) creating pidfile /tmp/.oscam/oscam.pid with pid 886
(config) services reloaded: 0 services freed, 0 services loaded, rejected 0
(config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
(main) signal handling initialized
(config) 993 provid's loaded
(config) 29 service-id's loaded in 0 ms
(net) monitor: initialized (fd=6, port=988)
(reader) HD01 [smartreader] creating thread for device /dev/ttyUSB0
(main) waiting for local card init
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
OSCam << cardserver log switched, version 1.20_svn, build r11518 (armv7ve-libreelec-linux-gnueabi)
(webif) webif: decompressed 178190 bytes back into 438200 bytes
(webif) HTTP Server running. ip=0.0.0.0 port=8888
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(reader) HD01 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
(reader) HD01 [smartreader] Cannot open device: /dev/ttyUSB0
(main) init for all local cards done
(emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
(emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
(anticasc) anti cascading disabled
(client) plain dvbapi-client granted (anonymous, au=off)
(dvbapi) dvbapi channelcache loaded from /storage/.kodi/userdata/addon_data/service.softcam.oscam/config/oscam.ccache
(dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11Before, I used this:
[reader]
label = Mouse
description = Mouse
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = ...
boxkey = ...
rsakey = ...
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2,0Now, I use this:
[reader]
label = Smargo
description = Smargo
protocol = smargo
device = /dev/ttyUSB0
caid = ...
boxkey = ...
rsakey = ...
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2,0I hope this helps you further
