Nightly images for A64, H3, H5, H6 and R40 boards

marine88 · August 13, 2020 at 5:01 PM

Banana pi m2 zero has h2+ orange pi lite was h3 cpu if U have on moment and can give me a litle help i will be very gratefull!

Banana pi M2 h2plus has 1gb of ram and h2+ cpu I think!

**jernej** · August 13, 2020 at 6:06 PM Official Post

If you re-read my post you'll see which file to change. Once you open it, it should be very obvious how to change it - board name - dts file name - U-Boot config name

marine88 · August 13, 2020 at 6:37 PM

I tried that i wont boot black screen on banna pi m2!

**jernej** · August 14, 2020 at 8:52 PM Official Post

This can only be debugged through serial console.

marine88 · August 15, 2020 at 3:50 AM

Quote from jernej

This can only be debugged through serial console.

I cant do that if you help me

**jernej** · August 15, 2020 at 6:57 AM Official Post

Note that with unsupported boards/features I only give clues here and there. I expect that anyone who works on that has sufficient knowledge to do it mostly on his/her own, unless if I think that it should be added to official LE but that is not the case here.

JohnDoe_71Rus · August 16, 2020 at 4:35 PM

very strange, but since february i have problem with hdmi-audio output. Cubieboard2 nightly images. From the settings available only pcm and bluetooth. last work hdmi-audio for me is selfbuild LibreELEC-A20.arm-9.80-devel-20200202081811-2f50060-cubieboard2.tar

log Ubuntu Pastebin

lines 256 detect sun4i-hdmi but then line 495 list only PCM and bluetooth (i use usb bluetooth dongl)

JohnDoe_71Rus · August 22, 2020 at 8:24 AM

this part kodi.log with working hdmi-audio

LibreELEC (community): devel-20200202081811-2f50060 9.80, kernel: Linux ARM 32-bit version 5.4.16

Kodi (19.0-ALPHA1 Git:6e15fcb9ff05ed7463d69083b2fa2fd702f3abd0)

Kodi compiled 2020-01-31 by GCC 9.2.0 for Linux ARM 32-bit version 5.4.16 (328720)

Ubuntu Pastebin

kEqO8XU.jpg

All next test.libreelec.tv images without hdmi-audio for me.

hemeh · August 28, 2020 at 7:46 AM

-sh: lspci: not found
No pciutils package?

I've a TX6 mini, I tried the vitalogy image, no wifi found so I would like to found the wifi chip. How can I do?
Source: Tanix TX6

Many thanks to the amazing support.

**jernej** · August 28, 2020 at 8:14 AM Official Post

PCIe is not yet supported on H6 with mainline kernel, so it doesn't matter much. Are you sure that it doesn't use SDIO interface?

hemeh · August 29, 2020 at 6:49 AM

Quote from jernej

PCIe is not yet supported on H6 with mainline kernel, so it doesn't matter much. Are you sure that it doesn't use SDIO interface?

How can I check?

**jernej** · August 29, 2020 at 8:49 AM Official Post

I don't know, open box and google wifi chip markings...

tutatis · September 2, 2020 at 3:35 PM

Hello, in "Orangepi Pc" I want to install Libreelec. I am looking for a current and stable version. Where do I find the image? Thank you.

I see that there are nightly and devel versions, which one to choose if there is no stable?

**jernej** · September 2, 2020 at 4:38 PM Official Post

There is no stable version yet. It will come with LE 10 (no ETA). Just use nightly image, which is updated every day if there is any change.

JohnDoe_71Rus · September 6, 2020 at 7:22 AM

find first broken hdmi-audio test image.

LibreELEC-A20.arm-9.80-devel-20200202081811-2f50060-cubieboard2 hdmi-audio work

LibreELEC-A20.arm-9.80-devel-20200215132138-d1fdc57-cubieboard2 hdmi-audio not work

this is not a very large interval to find out the reason?

**jernej** · September 6, 2020 at 7:43 AM Official Post

Quote from JohnDoe_71Rus

this is not a very large interval to find out the reason?

well, there is quiet a lot commits: Comparing 2f50060...d1fdc57 · LibreELEC/LibreELEC.tv · GitHub

I suspect kernel update but it could be also something else, something indirect, like switch from binary mali driver to mesa (due to memory, for example)

JohnDoe_71Rus · September 6, 2020 at 10:56 AM

I can try different images to localize the problem. There is no way to build images

**jernej** · September 6, 2020 at 11:59 AM Official Post

What do you mean "there is no way to build images" ? Just checkout one of the intermediate commits and build it.