Terratec Cinergy S2 USB box Rev. 4 drivers

Karelvh · February 23, 2019 at 12:15 PM

Hi,

Newbie here.... I just got a Terratec Cinergy S2 USB box, which turns out to be a Rev. 4, so no luck with the LE 9.0. Is there any way to get this box working, and / or can I help? I have several PC's and Pi2/Pi3 devices to run tests on..

Thanks in advance!

**CvH** · February 23, 2019 at 4:55 PM Official Post

Pls try the crazycat drivers from the driver chooser (described at the news artice at the website), they should support that device.

Karelvh · February 24, 2019 at 10:44 AM

Hi,

Thanks for the pointer. LE now seems to recognize the device, but I can't tune to any service: Found 1 mux, scan status FAIL. Any hint how to debug this?

The kernel log is:

Code

[    4.514391] kernel-overlays-setup: setup base modules
[    4.625274] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.17
[    4.694078] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[    4.694416] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[    4.698804] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[    4.841265] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.17
[    4.841507] kernel-overlays-setup: running depmod
[    9.786840] kernel-overlays-setup: done
[   12.238700] media: Linux media interface: v0.10
[   12.250848] videodev: Linux video capture interface: v2.00
[   12.250864] WARNING: You are using an experimental version of the media stack.
[   12.250864]  As the driver is backported to an older kernel, it doesn't offer
[   12.250864]  enough quality for its usage in production.
[   12.250864]  Use it with care.
[   12.250864] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   12.250864]  b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[   12.286280] WARNING: You are using an experimental version of the media stack.
[   12.286280]  As the driver is backported to an older kernel, it doesn't offer
[   12.286280]  enough quality for its usage in production.
[   12.286280]  Use it with care.
[   12.286280] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   12.286280]  b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[   12.288904] WARNING: You are using an experimental version of the media stack.
[   12.288904]  As the driver is backported to an older kernel, it doesn't offer
[   12.288904]  enough quality for its usage in production.
[   12.288904]  Use it with care.
[   12.288904] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   12.288904]  b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[   12.308938] dw2102: su3000_identify_state
[   12.308955] dvb-usb: found a 'Terratec Cinergy S2 USB HD Rev.4' in warm state.
[   12.308993] dw2102: su3000_power_ctrl: 1, initialized 0
[   12.320299] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   12.327446] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB HD Rev.4)
[   12.327495] usb 1-1.5: media controller created
[   12.335598] dvb-usb: MAC address: bc:ea:2b:46:13:a5
[   12.339351] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   12.681635] DS3000 chip version: 0.161 attached.
[   12.684113]  Chip ID = [DS3103B]!
[   12.684721] dt addr is 0x42
[   12.684755] usb 1-1.5: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[   12.684789] dvbdev: dvb_create_media_entity: media entity 'Montage Technology DS3000/TS2020' registered.
[   12.731925] Registered IR keymap rc-su3000
[   12.732180] rc rc0: Terratec Cinergy S2 USB HD Rev.4 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0
[   12.732400] input: Terratec Cinergy S2 USB HD Rev.4 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0/input0
[   12.734267] rc rc0: lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
[   12.734282] dvb-usb: schedule remote query interval to 150 msecs.
[   12.734304] dw2102: su3000_power_ctrl: 0, initialized 1
[   12.734313] dvb-usb: Terratec Cinergy S2 USB HD Rev.4 successfully initialized and connected.
[   12.734505] usbcore: registered new interface driver dw2102

Display More

Karelvh · May 12, 2019 at 11:07 AM

Just upgraded to 9.0.2... Still unknown Chip ID....

**CvH** · May 12, 2019 at 1:39 PM Official Post

Did you activated the crazycat drivers at the driver selector addon?

Karelvh · May 12, 2019 at 3:52 PM

Hi,
I did, but the 9.0.2 update seem to have overwritten the links in /lib/modules.... I see your drivers installed in /usr/lib/kernel-overlays/driver.dvb.crazycat, but the links in /lib/modules don't point to them anymore. How do I re-activate these drivers?

devegoo · May 26, 2019 at 9:14 PM

HI, i have question about this patchset :

http://github.com/b-rad-NDi/Ubun…9.montage.3103b

I also have Terratec cinergy box (rev.4) and i have request if it is possible to integrate this patches for this group of DVB cards with "montage 3103b" demodulator ...