Hi,
Newbie here.... I just got a Terratec Cinergy S2 USB box, which turns out to be a Rev. 4, so no luck with the LE 9.0. Is there any way to get this box working, and / or can I help? I have several PC's and Pi2/Pi3 devices to run tests on..
Thanks in advance!
Pls try the crazycat drivers from the driver chooser (described at the news artice at the website), they should support that device.
Hi,
Thanks for the pointer. LE now seems to recognize the device, but I can't tune to any service: Found 1 mux, scan status FAIL. Any hint how to debug this?
The kernel log is:
[ 4.514391] kernel-overlays-setup: setup base modules
[ 4.625274] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.17
[ 4.694078] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 4.694416] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[ 4.698804] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[ 4.841265] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.17
[ 4.841507] kernel-overlays-setup: running depmod
[ 9.786840] kernel-overlays-setup: done
[ 12.238700] media: Linux media interface: v0.10
[ 12.250848] videodev: Linux video capture interface: v2.00
[ 12.250864] WARNING: You are using an experimental version of the media stack.
[ 12.250864] As the driver is backported to an older kernel, it doesn't offer
[ 12.250864] enough quality for its usage in production.
[ 12.250864] Use it with care.
[ 12.250864] Latest git patches (needed if you report a bug to [email protected]):
[ 12.250864] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[ 12.286280] WARNING: You are using an experimental version of the media stack.
[ 12.286280] As the driver is backported to an older kernel, it doesn't offer
[ 12.286280] enough quality for its usage in production.
[ 12.286280] Use it with care.
[ 12.286280] Latest git patches (needed if you report a bug to [email protected]):
[ 12.286280] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[ 12.288904] WARNING: You are using an experimental version of the media stack.
[ 12.288904] As the driver is backported to an older kernel, it doesn't offer
[ 12.288904] enough quality for its usage in production.
[ 12.288904] Use it with care.
[ 12.288904] Latest git patches (needed if you report a bug to [email protected]):
[ 12.288904] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[ 12.308938] dw2102: su3000_identify_state
[ 12.308955] dvb-usb: found a 'Terratec Cinergy S2 USB HD Rev.4' in warm state.
[ 12.308993] dw2102: su3000_power_ctrl: 1, initialized 0
[ 12.320299] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 12.327446] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB HD Rev.4)
[ 12.327495] usb 1-1.5: media controller created
[ 12.335598] dvb-usb: MAC address: bc:ea:2b:46:13:a5
[ 12.339351] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 12.681635] DS3000 chip version: 0.161 attached.
[ 12.684113] Chip ID = [DS3103B]!
[ 12.684721] dt addr is 0x42
[ 12.684755] usb 1-1.5: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 12.684789] dvbdev: dvb_create_media_entity: media entity 'Montage Technology DS3000/TS2020' registered.
[ 12.731925] Registered IR keymap rc-su3000
[ 12.732180] rc rc0: Terratec Cinergy S2 USB HD Rev.4 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0
[ 12.732400] input: Terratec Cinergy S2 USB HD Rev.4 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0/input0
[ 12.734267] rc rc0: lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
[ 12.734282] dvb-usb: schedule remote query interval to 150 msecs.
[ 12.734304] dw2102: su3000_power_ctrl: 0, initialized 1
[ 12.734313] dvb-usb: Terratec Cinergy S2 USB HD Rev.4 successfully initialized and connected.
[ 12.734505] usbcore: registered new interface driver dw2102Just upgraded to 9.0.2... Still unknown Chip ID....
Did you activated the crazycat drivers at the driver selector addon?
Hi,
I did, but the 9.0.2 update seem to have overwritten the links in /lib/modules.... I see your drivers installed in /usr/lib/kernel-overlays/driver.dvb.crazycat, but the links in /lib/modules don't point to them anymore. How do I re-activate these drivers?
HI, i have question about this patchset :
http://github.com/b-rad-NDi/Ubun…9.montage.3103b
I also have Terratec cinergy box (rev.4) and i have request if it is possible to integrate this patches for this group of DVB cards with "montage 3103b" demodulator ...