I am building a pi zero pocket projector.
Build a Pi Zero W pocket projector! // Project - MickMake
I got the hardware and software working under Raspberry pi OS. So I know the hardware is working.
ForLibreELEC,
1. I was able to find the config.txt file, (/flash/config.txt)
2. Enable the i2c by adding dtparam=i2c_arm=on,spi=onto the /flash/config.txt file
3. Find the autotstart file /storage/.config/autostart.sh (equivalent to rc.local)
But how do issue (or obtain) i2cset commands?
This will configure the DLP2000 to use the Raspberry Pi GPIO lines for the display instead of the default splash screen.
i2cset -y 3 0x1b 0x0c 0x00 0x00 0x00 0x13 i
i2cset -y 3 0x1b 0x0b 0x00 0x00 0x00 0x00 i 0x00 i
This will configure the DLP2000 (digitial projector ) to use the Raspberry Pi GPIO lines for the display instead of the default splash screen.
Thanks