DVB Adaptor not showing in tvheadend

Hi,

I've just bought a"hauppauge" DVB-S2 461e usb stick. I currently have a DVB-t usb stick which works fine.

The 461e is shown as PCTV in lusub. But no drivers are loaded for the device. Many others on here have used the device so i'm confused as to why i cant get it to work.

My System is:

Dell Studio Hybrid pc

Libreelec 8.25

TVheadend 4.2 (9.0.115)

What i have tried so far:

Device works on windows 7 pc with manufacturer software.

Device is found to not have enough power on pi2 libreelec 8.90.004 (no driver installed)

Tried Addition DVB drivers (Cat etc...) none of them worked

Updated libreelec on Dell Studio to 8.90.004(to get round the powered hub issue of pi). Same result as with previous version of libreelec. also tried the additional DVB drivers.

dmesg ( http://ix.io/1mgg )

I'm at a loss as to why no driver will make this kit work.

Any Geniuses out there, that can help?

Many thanks in advance,

007Data

I've just brought it from Amazon. The rev is B7H9 if that helps?

in my first post. I did put I have tried the Leia build on the current machine and a fresh install on raspberry pi. No change in logs appart from pi shows under powered device. I'm hoping somebody has found a way with this new device. Also does that mean the Linux drivers on the Hauppauge site don't work with this version of the device?

thank you, will try that.

having a quick look for sundtek. I can't find any usb dvb-s2 listed. Do you have any links.

CvH where can i get a 4.18 kernel to test from?

current stable build of libreelec is kernel 4.11

and the most recent alpha of librelec is kernel 4.14

Quote

LibreELEC (official): 8.90.004 (RPi2.arm)

LibreELEC:~ # lsusb

Bus 001 Device 004: ID 2013:0259 PCTV Systems

Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter

Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Display More

Quote

[ 0.000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.14.67 (jenkins@build1) (gcc version 8.2.0 (GCC)) #1 SMP Fri Aug 31 05:06:08 BST 2018

[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d

[ 0.000000] CPU: div instructions available: patching division code

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2

[ 0.000000] Memory policy: Data cache writealloc

[ 0.000000] cma: Reserved 8 MiB at 0x2f800000

[ 0.000000] On node 0 totalpages: 196608

[ 0.000000] free_area_init_node: node 0, pgdat 80e831c0, node_mem_map af134000

[ 0.000000] Normal zone: 1728 pages used for memmap

[ 0.000000] Normal zone: 0 pages reserved

[ 0.000000] Normal zone: 196608 pages, LIFO batch:31

[ 0.000000] percpu: Embedded 17 pages/cpu @af0dd000 s39948 r8192 d21492 u69632

[ 0.000000] pcpu-alloc: s39948 r8192 d21492 u69632 alloc=17*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880

[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=3108-2109 disk=UUID=52241fa1-d0ca-4da4-a515-7345d959475a quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Memory: 755736K/786432K available (8192K kernel code, 630K rwdata, 1896K rodata, 3072K init, 419K bss, 22504K reserved, 8192K cma-reserved)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

[ 0.000000] vmalloc : 0xb0800000 - 0xff800000 (1264 MB)

[ 0.000000] lowmem : 0x80000000 - 0xb0000000 ( 768 MB)

[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)

[ 0.000000] .text : 0x80008000 - 0x80900000 (9184 kB)

[ 0.000000] .init : 0x80b00000 - 0x80e00000 (3072 kB)

[ 0.000000] .data : 0x80e00000 - 0x80e9db0c ( 631 kB)

[ 0.000000] .bss : 0x80e9f000 - 0x80f07c54 ( 420 kB)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] ftrace: allocating 28284 entries in 83 pages

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).

[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[ 0.000017] Switching to timer-based delay loop, resolution 52ns

[ 0.000260] Console: colour dummy device 80x30

[ 0.000275] console [tty0] enabled

[ 0.000299] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)

[ 0.000314] pid_max: default: 32768 minimum: 301

[ 0.000480] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000494] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.001346] Disabling memory control group subsystem

[ 0.001389] CPU: Testing write buffer coherency: ok

[ 0.001766] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[ 0.002114] Setting up static identity map for 0x100000 - 0x10003c

[ 0.002223] Hierarchical SRCU implementation.

[ 0.004320] smp: Bringing up secondary CPUs ...

[ 0.004991] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[ 0.005702] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

[ 0.006388] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

[ 0.006484] smp: Brought up 1 node, 4 CPUs

[ 0.006494] SMP: Total of 4 processors activated (153.00 BogoMIPS).

[ 0.006499] CPU: All CPU(s) started in HYP mode.

[ 0.006503] CPU: Virtualization extensions available.

[ 0.007229] devtmpfs: initialized

[ 0.016827] random: get_random_u32 called from bucket_table_alloc+0x108/0x23c with crng_init=0

[ 0.017347] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4

[ 0.017556] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[ 0.017572] futex hash table entries: 1024 (order: 4, 65536 bytes)

[ 0.018131] pinctrl core: initialized pinctrl subsystem

[ 0.018866] NET: Registered protocol family 16

[ 0.021284] DMA: preallocated 1024 KiB pool for atomic coherent allocations

[ 0.025287] cpuidle: using governor ladder

[ 0.025309] cpuidle: using governor menu

[ 0.025764] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[ 0.025771] hw-breakpoint: maximum watchpoint size is 8 bytes.

[ 0.025948] Serial: AMBA PL011 UART driver

[ 0.027569] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

[ 0.028015] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe

[ 0.058627] bcm2835-dma 3f007000.dma: DMA legacy API manager at b0813000, dmachans=0x1

[ 0.059940] SCSI subsystem initialized

[ 0.060159] usbcore: registered new interface driver usbfs

[ 0.060253] usbcore: registered new interface driver hub

[ 0.060326] usbcore: registered new device driver usb

[ 0.063563] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-29 14:56

[ 0.064690] clocksource: Switched to clocksource arch_sys_counter

[ 0.142277] FS-Cache: Loaded

[ 0.150764] NET: Registered protocol family 2

[ 0.151387] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[ 0.151496] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.151681] TCP: Hash tables configured (established 8192 bind 8192)

[ 0.151805] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.151849] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.152073] NET: Registered protocol family 1

[ 0.152499] RPC: Registered named UNIX socket transport module.

[ 0.152504] RPC: Registered udp transport module.

[ 0.152509] RPC: Registered tcp transport module.

[ 0.152514] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.301345] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available

[ 0.303339] workingset: timestamp_bits=14 max_order=18 bucket_order=4

[ 0.310249] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 0.310959] FS-Cache: Netfs 'nfs' registered for caching

[ 0.311552] NFS: Registering the id_resolver key type

[ 0.311580] Key type id_resolver registered

[ 0.311585] Key type id_legacy registered

[ 0.311600] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.311893] FS-Cache: Netfs 'cifs' registered for caching

[ 0.317458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[ 0.317469] io scheduler noop registered (default)

[ 0.317475] io scheduler deadline registered

[ 0.317751] io scheduler cfq registered

[ 0.317758] io scheduler mq-deadline registered

[ 0.317763] io scheduler kyber registered

[ 0.318003] io scheduler bfq registered

[ 0.320816] BCM2708FB: allocated DMA memory ef910000

[ 0.320842] BCM2708FB: allocated DMA channel 0 @ b0813000

[ 0.370809] Console: switching to colour frame buffer device 228x61

[ 0.402595] bcm2835-rng 3f104000.rng: hwrng registered

[ 0.402720] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

[ 0.403175] vc-sm: Videocore shared memory driver

[ 0.412701] brd: module loaded

[ 0.412823] loop: module loaded

[ 0.429230] usbcore: registered new interface driver rtsx_usb

[ 0.429241] Loading iSCSI transport class v2.0-870.

[ 0.429664] iscsi: registered transport (tcp)

[ 0.430064] libphy: Fixed MDIO Bus: probed

[ 0.430099] tun: Universal TUN/TAP device driver, 1.6

[ 0.430324] usbcore: registered new interface driver lan78xx

[ 0.430367] usbcore: registered new interface driver dm9601

[ 0.430426] usbcore: registered new interface driver smsc95xx

[ 0.430469] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[ 0.458386] dwc_otg 3f980000.usb: base=0xf0980000

[ 0.658607] Core Release: 2.80a

[ 0.658617] Setting default values for core params

[ 0.658644] Finished setting default values for core params

[ 0.858882] Using Buffer DMA mode

[ 0.858888] Periodic Transfer Interrupt Enhancement - disabled

[ 0.858892] Multiprocessor Interrupt Enhancement - disabled

[ 0.858900] OTG VER PARAM: 0, OTG VER FLAG: 0

[ 0.858914] Dedicated Tx FIFOs mode

[ 0.859308] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xaf904000 dma = 0xef904000 len=9024

[ 0.859334] FIQ FSM acceleration enabled for :

[ 0.859334] Non-periodic Split Transactions

[ 0.859334] Periodic Split Transactions

[ 0.859334] High-Speed Isochronous Endpoints

[ 0.859334] Interrupt/Control Split Transaction hack enabled

[ 0.859342] dwc_otg: Microframe scheduler enabled

[ 0.859389] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8069cc88

[ 0.859399] WARN::hcd_init_fiq:460: FIQ ASM at 0x8069cfec length 36

[ 0.859411] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000

[ 0.859461] dwc_otg 3f980000.usb: DWC OTG Controller

[ 0.859492] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

[ 0.859523] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000

[ 0.859569] Init: Port Power? op_state=1

[ 0.859574] Init: Power Port (0)

[ 0.859766] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 0.859777] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.859787] usb usb1: Product: DWC OTG Controller

[ 0.859795] usb usb1: Manufacturer: Linux 4.14.67 dwc_otg_hcd

[ 0.859802] usb usb1: SerialNumber: 3f980000.usb

[ 0.860350] hub 1-0:1.0: USB hub found

[ 0.860386] hub 1-0:1.0: 1 port detected

[ 0.860876] dwc_otg: FIQ enabled

[ 0.860881] dwc_otg: NAK holdoff enabled

[ 0.860885] dwc_otg: FIQ split-transaction FSM enabled

[ 0.860895] Module dwc_common_port init

[ 0.861127] usbcore: registered new interface driver usb-storage

[ 0.861277] mousedev: PS/2 mouse device common for all mice

[ 0.861687] i2c /dev entries driver

[ 0.862591] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer

[ 0.862845] bcm2835-cpufreq: min=600000 max=1200000

[ 0.863226] sdhci: Secure Digital Host Controller Interface driver

[ 0.863230] sdhci: Copyright(c) Pierre Ossman

[ 0.863588] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe

[ 0.863911] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe

[ 0.863998] sdhci-pltfm: SDHCI platform and OF driver helper

[ 0.866818] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.866906] hidraw: raw HID events driver (C) Jiri Kosina

[ 0.867574] usbcore: registered new interface driver usbhid

[ 0.867576] usbhid: USB HID core driver

[ 0.867922] vchiq: vchiq_init_state: slot_zero = af980000, is_master = 0

[ 0.868880] [vc_sm_connected_init]: start

[ 0.876878] [vc_sm_connected_init]: end - returning 0

[ 0.877852] NET: Registered protocol family 10

[ 0.878828] Segment Routing with IPv6

[ 0.878897] NET: Registered protocol family 17

[ 0.878979] Key type dns_resolver registered

[ 0.879308] Registering SWP/SWPB emulation handler

[ 0.885552] uart-pl011 3f201000.serial: cts_event_workaround enabled

[ 0.885621] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2

[ 0.887440] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0

[ 0.887449] mmc-bcm2835 3f300000.mmc: DMA channel allocated

[ 0.918631] sdhost: log_buf @ af907000 (ef907000)

[ 0.955720] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[ 0.957285] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.958849] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.961651] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[ 0.971377] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

[ 0.972556] console [netcon0] enabled

[ 0.972561] netconsole: network logging started

[ 0.972567] of_cfs_init

[ 0.972599] of_cfs_init: OK

[ 0.994798] Freeing unused kernel memory: 3072K

[ 1.021401] NOHZ: local_softirq_pending 40

[ 1.024712] NOHZ: local_softirq_pending 02

[ 1.035587] random: fast init done

[ 1.063397] mmc0: host does not support reading read-only switch, assuming write-enable

[ 1.064861] Indeed it is in host mode hprt0 = 00021501

[ 1.067225] mmc0: new high speed SDHC card at address aaaa

[ 1.067894] mmcblk0: mmc0:aaaa SL08G 7.40 GiB

[ 1.079900] mmc1: new high speed SDIO card at address 0001

[ 1.125956] mmcblk0: p1 p2

[ 1.137654] NOHZ: local_softirq_pending 40

[ 1.148424] NOHZ: local_softirq_pending 40

[ 1.164283] NOHZ: local_softirq_pending 40

[ 1.182038] NOHZ: local_softirq_pending 40

[ 1.248056] usb 1-1: new high-speed USB device number 2 using dwc_otg

[ 1.248157] Indeed it is in host mode hprt0 = 00001101

[ 1.314042] NOHZ: local_softirq_pending 40

[ 1.328173] NOHZ: local_softirq_pending 40

[ 1.387300] NOHZ: local_softirq_pending 40

[ 1.419925] NOHZ: local_softirq_pending 40

[ 1.448479] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[ 1.448496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.449219] hub 1-1:1.0: USB hub found

[ 1.449322] hub 1-1:1.0: 5 ports detected

[ 1.728060] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[ 1.818314] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[ 1.818327] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.820978] smsc95xx v1.0.6

[ 1.871733] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e7:80:cc

[ 1.944758] usb 1-1.2: new high-speed USB device number 4 using dwc_otg

[ 2.035490] usb 1-1.2: New USB device found, idVendor=2013, idProduct=0259

[ 2.035506] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2

[ 2.035514] usb 1-1.2: Product: PCTV 461

[ 2.035522] usb 1-1.2: Manufacturer: PCTV

[ 2.035531] usb 1-1.2: SerialNumber: 0013978911

[ 2.184925] Under-voltage detected! (0x00050005)

[ 2.241494] usb 1-1.5: new full-speed USB device number 5 using dwc_otg

[ 2.361340] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=5101

[ 2.361374] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.361382] usb 1-1.5: Product: RF Controller

[ 2.361391] usb 1-1.5: Manufacturer: MemsArt MA144

[ 2.367297] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[ 2.369608] input: MemsArt MA144 RF Controller as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.5…01/input/input0

[ 2.425608] hid-generic 0003:0C45:5101.0001: input,hidraw0: USB HID v1.10 Keyboard [MemsArt MA144 RF Controller] on usb-3f980000.usb-1.5/input0

[ 2.430662] input: MemsArt MA144 RF Controller as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.5…02/input/input1

[ 2.431150] hid-generic 0003:0C45:5101.0002: input,hidraw1: USB HID v1.10 Mouse [MemsArt MA144 RF Controller] on usb-3f980000.usb-1.5/input1

[ 2.436645] input: MemsArt MA144 RF Controller as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.5…03/input/input2

[ 2.491951] hid-generic 0003:0C45:5101.0003: input,hidraw2: USB HID v1.10 Device [MemsArt MA144 RF Controller] on usb-3f980000.usb-1.5/input2

[ 2.812803] systemd[1]: System time before build time, advancing clock.

[ 2.828928] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

[ 2.829486] systemd[1]: Detected architecture arm.

[ 2.832872] systemd[1]: Set hostname to <LibreELEC>.

[ 3.073571] random: systemd: uninitialized urandom read (16 bytes read)

[ 3.078292] systemd[1]: Starting Show Version...

[ 3.078801] random: systemd: uninitialized urandom read (16 bytes read)

[ 3.079608] systemd[1]: Listening on udev Control Socket.

[ 3.079794] random: systemd: uninitialized urandom read (16 bytes read)

[ 3.080463] systemd[1]: Listening on Journal Socket.

[ 3.085227] systemd[1]: Mounting POSIX Message Queue File System...

[ 3.090063] systemd[1]: Mounting Variable Directory...

[ 3.090874] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 3.092172] systemd[1]: Created slice User and Session Slice.

[ 3.243048] kernel-overlays-setup: setup base modules

[ 3.343106] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.14.67

[ 3.410440] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware

[ 3.410778] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays

[ 3.411819] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf

[ 3.587973] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/4.14.67

[ 3.588195] kernel-overlays-setup: running depmod

[ 5.494419] kernel-overlays-setup: done

[ 5.633609] systemd-journald[208]: Received request to flush runtime journal from PID 1

[ 6.039030] random: crng init done

[ 6.039039] random: 7 urandom warning(s) missed due to ratelimiting

[ 6.580415] Console: switching to colour dummy device 80x30

[ 6.673446] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[ 6.710849] rc_core: loading out-of-tree module taints kernel.

[ 6.711915] WARNING: You are using an experimental version of the media stack.

[ 6.711915] As the driver is backported to an older kernel, it doesn't offer

[ 6.711915] enough quality for its usage in production.

[ 6.711915] Use it with care.

[ 6.711915] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org

[ 6.711915] 8179de98cd35242446f4c7a6ecdd73c6c41f0cfb siano: get rid of an unused return code for debugfs register

[ 6.711915] 6c33d826b5c468033c21d8653d148dd758bbab28 media: isp: fix a warning about a wrong struct initializer

[ 6.711915] dcefa533bd97922a3cac37f395247082be44600b media: radio-wl1273: fix return code for the polling routine

[ 6.713171] usbcore: registered new interface driver mceusb

[ 6.737070] media: Linux media interface: v0.10

[ 6.749318] videodev: Linux video capture interface: v2.00

[ 6.749336] WARNING: You are using an experimental version of the media stack.

[ 6.749336] As the driver is backported to an older kernel, it doesn't offer

[ 6.749336] enough quality for its usage in production.

[ 6.749336] Use it with care.

[ 6.749336] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org

[ 6.749336] 8179de98cd35242446f4c7a6ecdd73c6c41f0cfb siano: get rid of an unused return code for debugfs register

[ 6.749336] 6c33d826b5c468033c21d8653d148dd758bbab28 media: isp: fix a warning about a wrong struct initializer

[ 6.749336] dcefa533bd97922a3cac37f395247082be44600b media: radio-wl1273: fix return code for the polling routine

[ 6.757994] usbcore: registered new interface driver cx231xx

[ 6.767966] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001

[ 6.768154] usbcore: registered new interface driver brcmfmac

[ 7.148746] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f

[ 7.150076] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14

[ 7.533645] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[ 7.534019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 7.955788] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 7.955809] brcmfmac: power management disabled

[ 7.971706] uart-pl011 3f201000.serial: no DMA platform data

[ 9.223861] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 12.599128] Bluetooth: Core ver 2.22

[ 12.599187] NET: Registered protocol family 31

[ 12.599190] Bluetooth: HCI device and connection manager initialized

[ 12.599204] Bluetooth: HCI socket layer initialized

[ 12.599213] Bluetooth: L2CAP socket layer initialized

[ 12.599232] Bluetooth: SCO socket layer initialized

[ 12.600417] Bluetooth: HCI UART driver ver 2.3

[ 12.600427] Bluetooth: HCI UART protocol H4 registered

[ 12.600430] Bluetooth: HCI UART protocol Three-wire (H5) registered

[ 14.984779] Voltage normalised (0x00000000)

[ 306.300857] usb 1-1.5: USB disconnect, device number 5

[ 795.831399] Under-voltage detected! (0x00050005)

[ 800.101821] Voltage normalised (0x00000000)

Display More

The above lsusb and dmesg are from the leila build on the pi. i know under voltage is detected. but i had the same result on my dell device without the under voltage warning. It's just easier to mess about with the pi and experiment raqther than using my every day device which has allot going on and i don't want to break. Best case i'd like a fix for the current stable version of libreelec (8.2.5) as i found when i updated my dell to libreelec (8.9) playback of dvb-t was slow,choppy and the whole system became unresponsive. But thats another issue for another thread.

CvH, are you saying the device I have does not have the newest chipset and that it is only the vid:pid that's different. Just trying to make sense of where we are compared with the other messages?

Quote from CvH

Not too sure, but at dmesg you can see that it loads an completely wrong module and therefore it doesn't start.

Thanks for pointing this out. can you show me the line that the wrong module is trying to execute. Crazy as there doesn't seem to be many compatible devices out there that i could use until this is resolved.