ZTE ZX2AA500 GB Ethernet Transceiver Problems (SOLVED big news for inside)

  • nothing wrong with the network cable/network that I connect to the t95z I have an alfawise h96pro that I have tested on the same cable/port and that works fine with full gigabit speeds (tested with file TX and Iperf shows over 900mbps)

  • ok. The symptoms you have are of corrupted data after MAC. It is likely that the S912 in your t95z is defective, I suggest you to return it

  • i'm not so sure on that, on the android rom that it came with I had no problems with file transfers and gigabit connections?.


    If it helps I can open the unit up and take some photos of the board?

  • Attached "gxm_q201_2g_1gbit_nocal.zip" did not work for my t95z plus 2/16 and LibreELEC 8.2 for S912 -> no LAN connection

    So whats wrong in my setup?

  • I'm wondering if there still this problem as I'm considering buying a secondary box. Have someone tried it with the latest version of Armbian? Menion have you checked out if there is still the issue with kernel 4.19?

    Zenbox Z11 Pro 2G/16G - 100M LAN - Wireless AC Qualcomm QCA9377 1-stream (433 Mbps) - LE 8.2.4.2-Test2

  • I have not found yet the time to bring a 4.19 to a boot on my S912 devices. When I tried the 4.18 Ethernet was just down. Can you give a shot with CoreELEC? There are people there confirming that they solved the issue

  • I have not found yet the time to bring a 4.19 to a boot on my S912 devices. When I tried the 4.18 Ethernet was just down. Can you give a shot with CoreELEC? There are people there confirming that they solved the issue

    I don't have a S912 device yet, I'm afraid. I was just considering to buy it and checking if it was working.

    Zenbox Z11 Pro 2G/16G - 100M LAN - Wireless AC Qualcomm QCA9377 1-stream (433 Mbps) - LE 8.2.4.2-Test2