LibreELEC 8.x images for additional dvb drivers
-
CvH -
April 17, 2016 at 7:29 PM -
Thread is Unresolved
-
-
will try and report back
-
crazycat is 5881 support available to add it to libreelec for a Raspberry pi? -
yes, 5220, 5881 and 5281 supported
-
yes, 5220, 5881 and 5281 supported
Great!!!CvH latest version of libreelec includes latest version of crazycat si2168 branch?
-
Can ı use this built with avalink avl6862 dvb card in k1 plus.this build Support this device?.
İ install this image to sd card 7.0.2.002 everything ok but no dvd module in tvh 4.2 conf interface. I am not expert no dvb driver included.or tvheadend 4.2 issue -
will try and report back
crazycat , worked. I'll test your media_build with this option enable , & post to your git.
-
ok
Look like i find solution for cx231xx i2c bus 2 sending - cx231xx-i2c: Workaround for I2C-3 write issue. · crazycat69/linux_media@5c9e4fa · GitHub
And 5990 support moved to latest branch (+ added demod reset) - cx231xx: TBS 5990 support. · crazycat69/linux_media@9c9522b · GitHub
So please check latest branch (with my updated media_build).
[hr]
CvH latest version of libreelec includes latest version of crazycat si2168 branch?si2168 branch deleted.
dvb-c annex b support for si2168 added to latest branch - si2168: DVB-C annex B support. · crazycat69/linux_media@5e05976 · GitHub -
ok
Look like i find solution for cx231xx i2c bus 2 sending - cx231xx-i2c: Workaround for I2C-3 write issue. · crazycat69/linux_media@5c9e4fa · GitHub
And 5990 support moved to latest branch (+ added demod reset) - cx231xx: TBS 5990 support. · crazycat69/linux_media@9c9522b · GitHub
So please check latest branch (with my updated media_build).
[hr]si2168 branch deleted.
dvb-c annex b support for si2168 added to latest branch - si2168: DVB-C annex B support. · crazycat69/linux_media@5e05976 · GitHubnice work crazycat
tested latest branch w/ tbs5990. not sure what is happening & used make menuconfig (see logs)I had your previous tbs5990 earlier branch tuner A working today with modprobe option for bulk transfer (success worked)
However Tuner B had poll/retune issue in tvheadend.maybe my setup - ubuntu 14.04 - 4.2 kernel not sure what I'm doing wrong
-
I installed it but tvheadend do not see the tuners, with si2168 branch it did
git clone CrazyCat / media_build — Bitbucket
git clone --depth=1 GitHub - crazycat69/linux_media: TBS linux open source drivers -b latest ./media
cd media_build
make dir DIR=../media
make distclean
make
-
make install ?
-
make install ?
Yes! I forget to paste this [emoji14]Also tried this:
git clone CrazyCat / media_build — Bitbucket
cd media_build
./build --main-git
make installIt didn't work
-
Yes! I forget to paste this [emoji14]Also tried this:
git clone CrazyCat / media_build — Bitbucket
cd media_build
./build --main-git
make installIt didn't work
./build --git GitHub - crazycat69/linux_media: TBS linux open source drivers latest
bcos ./build can't find the LATEST firmware file in /downloads on bitbuckets (404 error)
-
-
Quote
patch -s -f -N -p1 -i ../backports/v4.4_gpio_chip_parent.patch
Patched drivers/media/dvb-core/dvbdev.c
Patched drivers/media/v4l2-core/v4l2-dev.c
Patched drivers/media/rc/rc-main.c
Syncing with dir ../media/
make[2]: Leaving directory '/home/osmc/drivers/media_build/linux'
./scripts/make_kconfig.pl /lib/modules/4.4.13-5-osmc/build /lib/modules/4.4.13-5-osmc/build 1
Preparing to compile for kernel version 4.4.13
File not found: /lib/modules/4.4.13-5-osmc/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4.
Makefile:369: recipe for target 'allyesconfig' failed
make[1]: *** [allyesconfig] Error 2
make[1]: Leaving directory '/home/osmc/drivers/media_build/v4l'
Makefile:26: recipe for target 'allyesconfig' failed
make: *** [allyesconfig] Error 2
can't select all drivers at ./build line 511, <IN> line 3.It is still not getting installed on RPI with OSMC, what could be bad?
-
Hi all
is there driver for built in (DVB-S2: AVL6211 - TUNER: AV2012) for Amlogic S805? -
the dddvb drivers refuses to crosscompile correctly, but this is still on the list
Just wanted to let y'all know.. i've got my Cine CT V6 running great for over an week using the latest build from this thread.
excellent work CVH
-
I tried LibreELEC-RPi2.arm-7.0.2-dvb-drivers-1.6.img.gz fromhttp://http://cvh.libreelec.tv/LibreELEC/7.0_Jarvis/
and TBS5881 does not tune dvbc annex b with any of the driver options, crazycat is annex b working over linux? I tried to install it manually and it does not compile, and with latest version of libreelec (uploaded yesterday) it not tune also
-