Using an Ethernet-USB adapter...

    Hi,

    I'm using an android stick without RJ45, so I'm trying to use a ethernet-usb adapter.

    The adapter is correctly detected by LE, sometime I do get an IP address from dhcp...

    But LE is freezing instantly when I really want to use the network :(

    From my ubuntu the device is shown has:

    Bus 002 Device 004: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) DM9601 Fast Ethernet Adapter

    [ 2678.406706] usb 2-1.5: new full-speed USB device number 5 using ehci-pci

    [ 2678.500171] usb 2-1.5: New USB device found, idVendor=0fe6, idProduct=9700

    [ 2678.500179] usb 2-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0

    [ 2678.500184] usb 2-1.5: Product: USB 2.0 10/100M Ethernet Adaptor

    [ 2678.517233] dm9601 2-1.5:1.0 eth0: register 'dm9601' at usb-0000:00:1d.0-1.5, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58

    [ 2679.050304] dm9601 2-1.5:1.0 enx00e04c534458: renamed from eth0

    [ 2679.077364] IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready

    [ 2679.124630] dm9601 2-1.5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF

    [ 2680.420778] dm9601 2-1.5:1.0 enx00e04c534458: kevent 4 may have been dropped

    [ 2680.422831] dm9601 2-1.5:1.0 enx00e04c534458: kevent 4 may have been dropped

    [ 2680.455805] dm9601 2-1.5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF

    [ 2680.549806] dm9601 2-1.5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF

    Any ideas?

    defdefred

    According to that thread it's a USB 1.1 adapter. It'll be useless for pretty much anything these days.

    Unless you're streaming something that's really low bitrate, I suggest you get a different adapter.

    I have this: 112541143662 and it works wonderfully in LE.