uboot saveenv seems

sergiosmail · January 1, 2018 at 7:25 PM

Hi folks,

I've been using Libreelec for some weeks. Last day MXQ pro S905 box hangs and now it doesn't work any more.

As I can't boot in to the OS, I've attached some cables to the internal serial port (my board is MXQ-S905-D16 DATE:151021).

Looking at the uboot it seems that doesn't recognize the eMMC modules (it makes sense because the boot process doesn't show the logo image). Also If I run a "saveenv" command it shows "MMC init failed". Same process on other board shows "Writing to MMC(1)... done"

Any help, or any thought about how to debug further this issue?

Regards,

Sergios

bubblegum57 · January 1, 2018 at 7:31 PM

try installing to microsd or usb, if that works, perhaps by installingtointernal it will overwrite the eMMC

**kszaq** · January 1, 2018 at 8:19 PM

sergiosmail It looks like your eMMC is broken. You might still be able to run LE from SD card. First create SD card with LibreELEC (or use the one you already have), then write bootloader to it, you can use this tutorial (stop after the two "dd" commands): How to Create a Bootable Recovery SD Card for Amlogic TV Boxes