Summary :
When I used OpenElec with an older version, I was able to switch from DVI to HDMI and HDMI to DVI, without any display issue.
Now, I am still able to switch, but the display becomes horrible. I have to apply a work around to make it usable.
If initial openelec version is needed please let me know. I would need to restore it to have its version.
Full hardware specs (GPU is most important) :
============================================
Giada Cube N3 HDMI ION Atom 33
CPU
- Intel Atom N330 - 1.6GHz
- Chipset NVIDIA ION Graphics
Connecteurs :
- USB2.0 : x 5
- DVI : x 1
- VGA : Adaptateur DVI / VGA
- HDMI : x 1
- E-SATA : x 1
- Lecteur de cartes : 3 en 1
- Audio In/Out : x 1
- 100/1000M Lan : x 1
The LibreELEC version you are running :
=================================
8.2.2
In most cases a full debuglog
========================
Please Find it attached : kodi.log
Tell us the complete steps how to face the issue, so we can try to reproduce
==============================================================
Initial state : display on DVI
Go to System/Settings/Display
You will get output : BeforeSwitching.jpg
Click on "Monitor" to switch (switch to hdmi then switch back to dvi )
It work, but you will get output : AfterSwitching.jpg (horrible, can't read most of label)
WorkAround :
===========
Go to Interface / Settings / Skin
Switch to another skin (confluence in the example)
Display is fixed : AfterChangingSkin.jpg
I can then change back to the intial skin, and it is still ok
Maybe if skin was automatically reinitialized after switching from an output to another it would work?
