New C-band sat scan

If you already ran a scan - did the channels show up under SERVICES?

I'm unfamiliar with blind scanning a satellite - so I'm not sure what happens with the found information.

Probably best to ask on the tvheadend forum.

Hi

in which tvheadend folder is the predefined Muxes file

I have a tvheadend 4.2 that if you have them and another 4.3 that does not have them, I want to copy this file

Quote from CvH

/storage/.kodi/addons/service.tvheadend42/dvb-scan

copy it to that path (see sub folders for examples) and reboot

ok

usb dvbsky 960

they know how to configure tvheadend to scan band C SAT it gives me an error

linuxdvb: Technology M88DS3103 #1 : DVB-S #0 - failed to tune [e=Invalid argument]

Only this universal option lnb. I do not see lnb band c

I found this method with a tp and it worked for me

but I would like to scan normal as WITH UNIVERSAL LNB

-----------------------------------------------

Well i have been having similar issues on C band HD and SD channels on FTA

as it seems TVheadend is not capable of scanning channels in the C band frequencies..

i am using a TBS8920 card on it and in order to allow me to scan some channel tps not all of them i have to do the following maths..

example:

Channel name xxxyyyoooll

C band HD frequency : 3790 V

you have to calculate the following

5150 C band frequency from the LNBF

5150 - 3790 = 1360

then add this value to the LNBF universal KU band frequency

1360 + 9750 = 11110 frequency

then just add new TP with this new frequency + normal c band symbol rate + polarization + PSK8 or different + pilot settings like you would do on normal C band frequency to scan the channel.

This way i can tune most of the C band channels, aldo some i cannot might have to do with the LNBf C band type i am using.. cause i can get most on one Polarization only cannot get on both same time.