Wake up from suspend with apple ir remote broken in 8.2.0

jcjdammers · October 29, 2017 at 10:33 AM

After upgrading from 8.0.2 to 8.2.0 my Macmini is no longer waking up from suspend using the apple ir remote.

It only wakes up when I press the poweron button on the device itself but not with the remote.

Any suggestions?

Thanks, Jeroen.

**HiassofT** · October 29, 2017 at 1:03 PM

Could you please post the following info from your working (8.0.2) and non-working (8.2.0) installations?

Code

journalctl -a | paste
dmesg | paste
lsmod | paste

so long,

Hias

jcjdammers · October 29, 2017 at 1:15 PM

For the non-working 8.2.0 installation it is:

Code

Macmini:/sys/bus/usb/devices # journalctl -a | paste
http://sprunge.us/NZFX
Macmini:/sys/bus/usb/devices # dmesg | paste
http://sprunge.us/JciJ
Macmini:/sys/bus/usb/devices # lsmod | paste
http://sprunge.us/DEhD

For the working 8.0.2 intallation I first have to revert my system upgrade and I will need some more time for that.

jcjdammers · October 29, 2017 at 1:25 PM

For the working 8.0.2 intallation it is:

Code

LibreELEC (official) Version: 8.0.2
Macmini:~ # journalctl -a | paste
http://sprunge.us/fEGL
Macmini:~ # dmesg | paste
http://sprunge.us/cYiX
Macmini:~ # lsmod | paste
http://sprunge.us/GijW

I see there is a difference, but I have no understanding of what this is. So hope you can help me Hias.

Thanks.

**HiassofT** · October 29, 2017 at 3:45 PM

One difference is that we enable the apple-ir driver in 8.2.0 - this could be what's causing the issue, although I have no idea why wakeup worked before.

Could you test if wakeup works after running the following command on 8.2.0:

Code

DEVPATH="/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:05AC:8242.0001/input/input4" /usr/lib/udev/wakeup_enable

so long,

Hias

jcjdammers · October 29, 2017 at 5:14 PM

Hi Hias,

I executed the command you requested, and then tested the wakeup again.

However it still did not work to wakeup.

Jeroen

Code

LibreELEC (official): 8.2.0 (Generic.x86_64)
Macmini:~ # DEVPATH="/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:05AC:8242.0001/input/input4" /usr/lib/udev/wakeup_enable
Macmini:~ #

jcjdammers · October 29, 2017 at 5:33 PM

Would it otherwise be possible to use the old ir driver in 8.2.0 instead of the apple-ir driver ?

**HiassofT** · October 29, 2017 at 5:59 PM

The previous versions contained no driver for the apple remote at all

We added the apple-ir driver because we got reports that atvclient no longer worked without it. Also using lirc with the macmini / usbhid driver seems to require it.

Unfortunately none of us LibreELEC developers have such hardware to test.

BTW: are you using atvclient? If yes, uninstall it, then reboot, then ssh in, run the command from above and test again if wakeup works.

IIRC atvclient unbinds the USB device so the command I posted could silently fail. Without atvclient probably only ENTER and volume up / down will be working, but that should be enough to test this. Better connect a USB keyboard during tests though.

If that works, install atvclient, check if the remote works normally, and then check if suspend / remote wakeup works. Don't reboot in between, otherwise the wakeup settings from manually running wakeup_enable might be lost.

so long,

Hias

jcjdammers · October 29, 2017 at 6:28 PM

Code

Macmini:~ # ps -ef | grep atvclient
  364 root       0:00 /usr/sbin/atvclient -m

Yes I am running atvclient (it comes automatically with the installation).

How can I manually uninstall / install it as you request me to do?

What are the commands I have to enter?

Thanks.

Jeroen

**HiassofT** · October 29, 2017 at 6:40 PM

Sorry, had forgotten that atvclient is built into the image, thought it was an addon.

To disable it run the following command, then reboot.

Code

systemctl mask atvclient.service

To enable it again run this:

Code

systemctl unmask atvclient.service

Then, to start it without rebooting this should work:

Code

systemctl start atvclient.service

so long,

Hias

jcjdammers · October 29, 2017 at 8:04 PM

Hi Hias,

I did all the instructions you said, but unfortunately without any success

As far as I know atvclient is the only way to get the apple ir remote working properly and it works already for ages. There was a small code change earlier this year to support Krypton, but before that atvclinet code was not touched for a very long time.

Is it an option to disable / remove the newly added apple ir driver, since it is not required by atvclient?

I am happy to test.

Jeroen.

**HiassofT** · October 29, 2017 at 11:25 PM

According to this post atvclient didn't work at all until we enabled the appleir driver atvclient working but kodi does nothing

I 've just kicked off a build without that driver and can upload it tomorrow but I suspect wake-from-suspend will still not work and atvclient won't work either.

BTW: just noticed that you wrote that wakeup didn't work with 8.0 either and you manually had to add something to autostart: Apple IR Remote (atvclient) not working in v7.90.010 ALPHA

8.2 uses a newer kernel (4.11 instead of 4.9 in 8.0) so probably some other change(s) might be needed...

so long,

Hias

jcjdammers · October 30, 2017 at 6:48 AM

Hi Hias,

Thanks for preparing the build. I will test it on Saturday because I am away from home the whole week.

I have added below lines to my autostart.sh in order for the USB devices/Bus to enable the wakeup.

The atvclient itself has always worked for me (in LE 8 it needed latest version with krypton patches though).

My autostart.sh

Code

echo enabled > /sys/bus/usb/devices/2-1.8.2/power/wakeup
echo 1 > /sys/power/pm_async

Jeroen.

**HiassofT** · October 30, 2017 at 3:44 PM

Hi Jeroen,

interesting that atvclient always worked for you - I'll probably need have a closer look into the differences between your setup and the one where atvclient failed.

Here's a build without the apple-ir driver: LibreELEC-Generic.x86_64-8.2-devel-20171030102100-r26198-g0239080387.tar

It would also be great if you could run the following commands on 8.0.2, 8.2.0, 8.2.0 with atvclient disabled, and the build above and post the output - this should hopefully give some hints if other wakeup related settings have changed:

Code

cat /proc/acpi/wakeup
find /sys/devices -name wakeup | xargs grep .

so long,

Hias

jcjdammers · October 30, 2017 at 8:21 PM

Hi Hias,

Thanks for the build.

I will do all the testing on saturday and report back to you then.

Cheers,

Jeroen

jcjdammers · November 4, 2017 at 8:54 AM

Hi Hias,

I tested the new buid and it works geat. Resume / wakep works as before again !!!

Below is the output from the commands that you requested me.

I am using LE and therefore OE for a long time now on Macmini (and prior ATV1) and the atvclient always worked perfectly, and for many other users.

So I wonder what the plan is now?

Greetings,

Jeroen

Code

8.0.2
-----

Macmini:~ # cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
P0P2      S4    *disabled  pci:0000:00:01.0
EC        S4    *disabled  platform:PNP0C09:00
GMUX      S4    *disabled  pnp:00:03
HDEF      S4    *disabled  pci:0000:00:1b.0
RP01      S4    *disabled  pci:0000:00:1c.0
GIGE      S4    *enabled   pci:0000:01:00.0
SDXC      S4    *disabled  pci:0000:01:00.1
RP02      S4    *disabled  pci:0000:00:1c.1
ARPT      S4    *disabled  pci:0000:02:00.0
RP03      S4    *disabled  pci:0000:00:1c.2
EHC1      S4    *enabled   pci:0000:00:1d.0
EHC2      S4    *disabled  pci:0000:00:1a.0
XHC1      S4    *disabled  pci:0000:00:14.0

Macmini:~ # find /sys/devices -name wakeup | xargs grep .
/sys/devices/pci0000:00/0000:00:1c.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:14.0/usb3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/usb4/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1f.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:04.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:03.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:06.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:05.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:16.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1b.0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS2/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS3/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS1/power/wakeup:disabled
/sys/devices/pnp0/00:03/power/wakeup:disabled
/sys/devices/pnp0/00:02/power/wakeup:enabled
/sys/devices/LNXSYSTM:00/LNXPWRBN:00/power/wakeup:enabled


8.2.0
------

Macmini:~ # cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
P0P2      S4    *disabled  pci:0000:00:01.0
EC        S4    *disabled  platform:PNP0C09:00
GMUX      S4    *disabled  pnp:00:03
HDEF      S4    *disabled  pci:0000:00:1b.0
RP01      S4    *disabled  pci:0000:00:1c.0
GIGE      S4    *enabled   pci:0000:01:00.0
SDXC      S4    *disabled  pci:0000:01:00.1
RP02      S4    *disabled  pci:0000:00:1c.1
ARPT      S4    *disabled  pci:0000:02:00.0
RP03      S4    *disabled  pci:0000:00:1c.2
EHC1      S4    *enabled   pci:0000:00:1d.0
EHC2      S4    *disabled  pci:0000:00:1a.0
XHC1      S4    *disabled  pci:0000:00:14.0

Macmini:~ # find /sys/devices -name wakeup | xargs grep .
/sys/devices/pci0000:00/0000:00:1c.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:14.0/usb3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/usb4/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1f.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:04.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:03.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:06.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:05.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:16.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1b.0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS2/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS3/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS1/power/wakeup:disabled
/sys/devices/pnp0/00:03/power/wakeup:disabled
/sys/devices/pnp0/00:02/power/wakeup:enabled
/sys/devices/LNXSYSTM:00/LNXPWRBN:00/power/wakeup:enabled

8.2.0 with atvclient disabled
------------------------------

Macmini:~ # cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
P0P2      S4    *disabled  pci:0000:00:01.0
EC        S4    *disabled  platform:PNP0C09:00
GMUX      S4    *disabled  pnp:00:03
HDEF      S4    *disabled  pci:0000:00:1b.0
RP01      S4    *disabled  pci:0000:00:1c.0
GIGE      S4    *enabled   pci:0000:01:00.0
SDXC      S4    *disabled  pci:0000:01:00.1
RP02      S4    *disabled  pci:0000:00:1c.1
ARPT      S4    *disabled  pci:0000:02:00.0
RP03      S4    *disabled  pci:0000:00:1c.2
EHC1      S4    *enabled   pci:0000:00:1d.0
EHC2      S4    *disabled  pci:0000:00:1a.0
XHC1      S4    *disabled  pci:0000:00:14.0

Macmini:~ # find /sys/devices -name wakeup | xargs grep .
/sys/devices/pci0000:00/0000:00:1c.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:14.0/usb3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/usb4/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1f.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:04.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:03.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:06.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:05.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:16.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1b.0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS2/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS3/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS1/power/wakeup:disabled
/sys/devices/pnp0/00:03/power/wakeup:disabled
/sys/devices/pnp0/00:02/power/wakeup:enabled
/sys/devices/LNXSYSTM:00/LNXPWRBN:00/power/wakeup:enabled

The new build
--------------

Macmini:~ # cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
P0P2      S4    *disabled  pci:0000:00:01.0
EC        S4    *disabled  platform:PNP0C09:00
GMUX      S4    *disabled  pnp:00:03
HDEF      S4    *disabled  pci:0000:00:1b.0
RP01      S4    *disabled  pci:0000:00:1c.0
GIGE      S4    *enabled   pci:0000:01:00.0
SDXC      S4    *disabled  pci:0000:01:00.1
RP02      S4    *disabled  pci:0000:00:1c.1
ARPT      S4    *disabled  pci:0000:02:00.0
RP03      S4    *disabled  pci:0000:00:1c.2
EHC1      S4    *enabled   pci:0000:00:1d.0
EHC2      S4    *disabled  pci:0000:00:1a.0
XHC1      S4    *disabled  pci:0000:00:14.0

Macmini:~ # find /sys/devices -name wakeup | xargs grep .
/sys/devices/pci0000:00/0000:00:1c.1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1a.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1d.0/usb2/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:14.0/usb3/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:14.0/usb4/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1f.2/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/power/wakeup:enabled
/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:04.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:03.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:06.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:01.0/0000:04:00.0/0000:05:05.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:16.0/power/wakeup:disabled
/sys/devices/pci0000:00/0000:00:1b.0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS2/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS0/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS3/power/wakeup:disabled
/sys/devices/platform/serial8250/tty/ttyS1/power/wakeup:disabled
/sys/devices/pnp0/00:03/power/wakeup:disabled
/sys/devices/pnp0/00:02/power/wakeup:enabled
/sys/devices/LNXSYSTM:00/LNXPWRBN:00/power/wakeup:enabled

Display More

**HiassofT** · November 4, 2017 at 3:00 PM

Thanks a lot for the feedback!

Wakeup states look identical for 8.2.0 and my test build, no idea why wakeup doesn't work with 8.2.0.

I'm inclined to disable the kernel appleir driver again in official builds, but I'll wait a bit for feedback from the other thread (atvclient not working).

so long,

Hias

jcjdammers · November 5, 2017 at 6:43 PM

Ok Hias, thanks for your help.

Please let me know when this is fixed in the official build, so I can upgrade to an official build again.

Or If you want me to do another test....

Jeroen.