Posts by NINJAIII

  • [8.2.3.1] LibreELEC 8.0 for S805

    I simply used the SD card with the 7.0.1.1 made sure it worked ok then followed the same procedure to InstalltoNand command. I would however just boot from SD card with 7.0.1.1 and give it some runtime confirm its ok before you install to NAND. It working well for me but it also keeps me stuck on Jarvis.

  • [8.2.3.1] LibreELEC 8.0 for S805

    Sabolch

    I have the same issue and have gone through everything you can think off. I have the 512 ram as well and it would freeze even at idle.

    512 is enough RAM. As you said Android it will not freeze. There is a problem with this board and Kszaq build. I have tried every version and the only one that does not freeze is older version. 7.0.1.1. It works fine but it is only Jarvis. I am not sure what changed after that build but anything after that

    with m201D freezes certain MXQ Motherboards. I also use a Wifi Dongle. I normally run at around 300 Megs of RAM with many addons without any issue on that Build.

    Give it a shot on SD card. Let us know.

    Index of /s805/old_builds

  • [7.0.3.3d] LibreELEC 7.0 for S805

    @Alexandre

    Have a read on Page 4 of this Topic you will see some things Kszaq found about Fake RAM with these Boxes.

    thread-200-page-4.html

  • [7.0.3.3d] LibreELEC 7.0 for S805

    Quote from kszaq


    As far as I can tell there were no changes regarding suspend between 7.0.1.4 and 7.0.2.2.

    Hi Kszaq:

    I have one of the newer MXQ Boards S805Q_V2.0 that only boots up with your M201D Build and of course it has the crappy 350 Megs. I have tried almost every Build inc. 7.0.3.3C as well as 8.0.0b and I am getting Freezing just with Kodi at idle or even playing Video's. Its random can be 5 mins or 30 mins. I have tried many things. Today I tried one of your first Build supporting M201D (7.0.1.1)and was going to slowly test each version from there moving up.

    To my surprise no lockups at this old version. No freezing at idle or playback. Been testing for over a day now. This may be the one i will use.

    Question:

    I currently have loaded to NAND 8.0.0b and soon I will push from SD (7.0.1.1) to NAND. Will the standard SSh (InstalltoInternal) work for me in this case. Will it overwrite the LibreElec
    8.8.8b in NAND ?

    Thanks for all your great work !!!

  • [7.0.3.3d] LibreELEC 7.0 for S805

    Quote from mittelschmerz


    Well, I managed to find a 7.0.1.4 image on sx05.eu and can confirm that wake up by pressing remote power button works out of the box on this build for me, and doesn't on 7.0.3.3c, 8.0.0b or 7.0.2.2. Anyway, I'm quite happy with using a slightly older build - it's been rock stable for me and satisfies all my needs. Thanks once again )

    Could you provide the Link as I too need an older version to try.

    Thanks

  • [7.0.3.3d] LibreELEC 7.0 for S805

    I have the exact same board S805Q_V2.0 and only the M201D works for me. I also have only 350 Megs of RAM. It works but it will freeze sometimes playing a Movie or even if Kodi just sits idle. it may sit idle for 20 Mins and Freeze or 7 Hours. Do you have any issues with it Freezing ?

  • [8.2.3.1] LibreELEC 8.0 for S805

    Quote from rev6


    Anyone experiencing front-end lockups? It happens randomly. Smb is still accessible.

    Things will work fine from 5 mins to 30 Mins and randomly Video will freeze and then Krypton will reboot. happens mostly on Video Playback. However I have one of these
    crappy MXQ Boxes with 512M of RAM (Fake RAM Box was supposed to be 1 GIG) and only build that worked was the M201D. So Probably the shortage of RAM may be my issue.

  • MXQ box won't boot into SD CARD LE or recovery.

    Quote from Crucial


    I had an issue like this with my 905x box. What I did was use the UPDATE&BACKUP app that most these boxes come with, zipped up an aml_upgrade_package with 4 other files and boom. I was able to flash out of the Android firmware that prevented my toothpick method, recovery, and booting from sd.

    I was tempted to do the same however I did not want to NAND flash until I try running from SD card first. I even tried putting a Fake ZIP file on the SD card and picked it from Update and Backup but whenever the SD card is inserted it won't get past the S805 AMLOGIC Logo once rebooted. I would Root the box but can't find any easy way to root.

    UPDATE:

    I found out the Hard way I have one of these MQX Boxes with Fake RAM (512) instead of 1 Gig. It ended up booting fine from the M210D Build of LE. It was the only Build that would boot. All works well except the Box freezes randomly both playing Video and sometimes just idle in Kodi. I tried several Class 10 SD cards same result. Any tips ? I then flashed to NAND. Again works well most of the time with Random Freeze. Using the 7.0.3.3C build from K. If I can stop these Freezes it would run great.

  • MXQ box won't boot into SD CARD LE or recovery.

    Quote from kodiuser1


    I tried most of these methods and have found the closest I can get is that I can get to the recovery screen by using Android Terminal Emulator.

    What files do I need on the sd card to be able to use the update from EXT command in recovery?
    I would like to test sd card install first but thinking I'll have to go straight to installing to NAND.

    Appreciate all your help.

    EDIT Using Android Terminal Emulator "reboot update" command did work.

    I am having the same issue as well. When you used the "reboot update" was your Box Rooted ?

    Thanks