Posts by Alex31

Where can i find these setting in LibreElec?

U mean Cec setting in Android, i need to start te X96 box wihout the sd with LibreElec on it?
Then cec off?

Everything is working great now for several weeks

But i have one issue,
When i turn of Kodi 17 the X96 box is shutting down but also my Tv is shutting down.....
Is there a fix or another way to prevent shutting down my tv
Thanks............

Ah ok thanks
And thank u for the support

I did watch kodi for several hours yesterday and no green screens yet
Hope everyting is fine now........

I did notice when i make a micro sd card bootable with LibreElec USB SD Creator my 16 Gb card is now only 512 Mb in size????
What is wrong here?

Ok

I type cd .config first
Then chmod 755 autostart.sh
Then reboot

LibreELEC:~ # cd .config
LibreELEC:~/.config # chmod 755 autostart.sh
LibreELEC:~/.config # reboot

The the X96 is restarting, when kodi is started the Force rgb should be on......

When i put in the first line i get this....?

LibreELEC:~ # chmod 755 autostart.sh
chmod: autostart.sh: No such file or directory
LibreELEC:~ #

Thanks,

I will try it
After i overwrite the existing autostart.sh file with your file
Do i need to type these lines again?

chmod 755 autostart.sh ( the enter )
reboot ( the enter )

When i look in het autostart.sh file ( with WinSCP )
I see my two lines

[font]#!/bin/sh

echo 1 > /sys/class/amhdmitx/amhdmitx0/output_rgb[/font]

Maby the file does not start when i start my X96 box?

I have a Philips Tv the 47PFL8404H
And i tried all Hdmi ports on my tv, yes i also tried other Hdmi cables.
before i used the patch i tried that allready
Sometimes when my screen turns green its for a short period of time 20 sec or so and other times it's for 2 minutes
And in the period of 20 sec, i could not be so fast to put the code in again hehehe
I thnink that the patch was used in the correct way, i followed all the steps and at last my box restarted automatic

What could be the problem for my Tv turning green?

I folowed the steps as i said in my message above
After that the box did restart and still i have sometimes a green screen???

Does the command code that i add work with LibreElec version is 8.0.0b ??
Or is there an other way to force the rgb output?

Can i check if the rgb is on or off?

I have a X96 Tv box S905 Arm with 1 Gb memory
The installed LibreElec version is 8.0.0b

My screen keeps turing Green,

I tried,

Activate SSH server on your box
- Connect using SSH client (user: root, password: libreelec)

Type the following commands:Code:

cd .config
nano autostart.sh

This starts an editor. Insert the following text:Code:

#!/bin/sh


echo 1 > /sys/class/amhdmitx/amhdmitx0/output_rgb

Then save and typeCode:

chmod 755 autostart.sh
reboot

Your box will restart, and from now on always use RGB output.

Did it work, no not for me
After 15 or 30 minutes the screen turns green, the i switch on the Tv from Hdmi 1 to Hdmi 2 and back and the screen is fine
And after a while yep the screen turns green again.

I need help......