On the Base.
Tiny pinhole top right as you read the mac address sticker.
Good onya fella - you da man!
Posts by Poida
-
-
LibreELEC-S905.aarch64-7.0.2.003 SD CARD
Where is the reset button on the Mini MX to enable the SD install? -
Just make sure your box has the s905 Revision C chip installed.
That I'll just have to wait and see, I guess. No indication from the supplier. -
Thanks guys, for the info.
I've ordered a couple, so time will tell. -
MiniMX is not the Beelink.
That's fine. The boxes are advertised as Beelink. If not, and they don't behave as they should. I'll return them
You might want to pull that link out please. Forum rules.
Thanks for pointing that out, done.
That Fleabay listing is misleading. That is why i never use Fleabay.
I always use ebay, gotta be the best buyer guarantee around. If it's misleading then back it goes!
-
Hmm the one that I'm looking at is a Beelink Mini MX Ver 1.0 TV Box (not MXIII)
I wonder if it's the same -
Display More
Be carefull with that advice. If the seller has customer pays return postage in their returns policy and they claim the postage will be returned AFTER the goods are returned and inspected, stay away.
This is a way of them making sure you dont return the goods. Why ? Because in China you have to pay DUTY when anything comes into China.
No way they accept the goods are returns. They do not aknowledge returns as being not subject to DUTY.
The seller will refuse to pay the duty and the goods will be returned to you.
They will then advise you FAILED to return the goods and you will be well annoyed.
Hope this adds to clarify the Chinese Smart Business Policy.
I totally agree with you.
Good point, the chinese sellers always claim they are unable to print the return postage labels, but promise to refund postage once the goods are received by them.
I personally have never agreed to this and ALWAYS demand that they supply return postage label - as per ebay policy - they refuse and are therefore in default.
At that point request to return case is marked as complete and purchase price refunded. Usually takes about a week
[hr]They both work.
Only problem i have had is the Ethernet is sometimes not recognised on Cold Boot only.
Never happens if box has power supply alive.
It happens in Android as well.
Ethernet module error and Kszaq is aware of my issue.
Cheers.
Yes, I'm using the 7.0.2.005 image with a Beelink Mini MX III 2/16GB box via microSD card and for the most part it works very well.
That's good news, does the led work correctly (and reboot / shutdown etc) ? -
Also I still don't understand why I need twrp? How do I copy the .sh and .start files using twrp?You don't need TWRP for that. If you have any problems using SSH, you can use TWRP for that (it has a file manager and SMB share and also SSH, I believe)
-
[hr]
I think the reset button is broken on this box as well.More people should consider returning the boxes that have non-funtional reset switches.
Without the reset switch, if the box fails to boot properly, you have a major headache.
If more people returned them, instead of 'making do' perhaps less dodgy sellers would be passing these rejects off as originalAnyone purchasing from ebay (or using Paypal) will have no problem getting a full refund (especially those that live in Australia)
Both ebay and Paypal have purchase guarantee, meaning any goods received that are not as adverised or faulty, entitle you to full refund including return postage.I have just returned two Nexbox A95s because the reset switches did not work. Full refund and, as seller refused to provide a return postage label, was not required to post the boxes back.
I am now looking at the Mini MX 2GB ram /16GB rom boxes.
Is anyone using these builds on a Mini MX 2/16GB - or do they only work with the 1/8GB ? -
How do you get twrp on the box and how do you copy the files with it? I thought twrp was an android recovery?Run it from SD card. Rename twrp recovery to recovery.img, place it in the root of your SD card and boot to recovery
There are many builds of TWRP, make sure you get one confirmed working correctly with your device. -
-
And that remote.conf.txt was all ready in there.you must delete the .txt from the end
-
Can anyone offer me some help please?Use the HD18Q or MXQ build (whichever one gets your WiFi working) and then drop the remote.conf from the m201d build into /storage/.config via SSH or, alternatively, the configfiles samba share
-
I am still on Mavericks but this version works for me.What is a ' Mavericks' ?
-
Small update release:
7.0.2.4 7.0.2.4Are all the builds after 7.0.1.4 supposed to switch video refresh rate to 24Hz ?
The issues with corrupt playback after starting a movie (and skipping video after resume) for the first few seconds, completely disappears if I remove 24Hz refresh rate.
I was just wondering why 24Hz is forced in the first place
-
Have to try the reboot to recovery method though... Is that a standart feature of android 5.1? All my s805 boxes didn't have that option out of the box...Not usually standard, I don't think but there's loads of free apps that do it
-
kszaq, I've just been playing with a couple of Nexbox A95 units and neither one will boot LE from SD.
I'm not game enough to install to Nand without first checking from SD.I know there is an issue with the reset switches, so the toothpick method is not going to work but, they do not boot from the SD card even when I reboot to Recovery from Android (the first post suggests that they should). I've tried numerous makes / sizes / formats of SD card.
These boxes also don't seem to recognise recovery.img on the SD card at all (eg can't boot into TWRP on SD card etc).Have you heard any other reports about these boxes ?
-
If 24Hz playback worked properly, so it should be now.The same issue exists with the newest test builds.
I think 24Hz refresh rate might be a problem for the TV that the v2.0 board is connected to.
I have tried with the v2.0 connected to a different TV and, when it switches to 24Hz, that TV displays the video OK.Builds 7.0.1.4 and below are not selecting 24Hz refresh rate for video playback and so the issue doesn't arise, regardless of which TV is connected