Bump. Anyone have the official alpha release up and running? How well does it run? Also, does Le Potato have a 3.5mm audio jack for headphones?

Looks like LibreELEC has now released an official alpha build for Le Potato (S905X-CC). I see this board has a 3.5mm TRRS AV jack. Can I connect a standard 3.5mm set of headphones into the Le Potato and get good, clean audio? The last board I did this with was the RPi and the analog audio out was less than desirable.

At this point getting a P3 B+ for KODI is a total waste of money, imho. You'd be better off getting an Odroid C2.

The Odroid N1 looks like it would make a fantastic LibreELEC device!

Subscribed.

Sorry, the forums had a bug reporting section stating to report them here, including video playback issues. Can you clarify the difference between a KODI bug and a LibreELEC bug? This may need to be noted in the How To notice.

Disabling OMXPLAYER and using MMAL fixes the problem. I tested 10 Dolby TrueHD 7.1 and DTS-HD 7.1 movies with "Adjust Display Refresh Rate" set to "ON START / STOP" and they all played without issue when MMAL was used. There is an issue with OMXPLAYER.

I think I may have found a clue. I noticed that if "Adjust Display Refresh Rate" is set to "OFF" then the issue appears to go away. When set to "ON START / STOP" the issue returns. I've run the following set of four tests using films encoded with a TrueHD 7.1 Atmos track. The 5th test was with films encoded with DTS-HD 7.1. Audio settings have been reset back to default, number of channels set to 5.1:

* Test 1 - Refresh set to "ON START / STOP": 7 out of 10 tests failed (no center channel)

* Test 2 - Refresh set to "OFF": 0 out of 10 tests failed (center channel present)

* Test 3 - Refresh set to "ON START / STOP": 8 out of 10 tests failed (no center channel)

* Test 4 - Refresh set to "OFF": 0 out of 10 tests failed (center channel present)

* Test 5 - Refresh set to "ON START / STOP": 5 out of 10 tests failed (no center channel)

Quote from wrxtasy

.... next best is the MECOOL M8S Pro+

Could the Vero 4K image be installed on a box like the Mecool M8S Pro+ or the Beelink Mini MXIII II?

Update: With passthrough disabled it has now happened to the DTS-HD Master Audio 5.1 track on War of the Worlds. No center channel. Once again, enabling or disabling "Stereo upmix" in the Audio and Subtitle Settings fixes the problem ... until it happens again.

Update: Looks like that didn't solve it. After viewing a few trailers and bumpers with CinemaVision, the center channel for the main feature (Mission Impossible: Rogue Nation) was silent/missing. When I disabled "Stereo Upmix" while the movie was playing everything suddenly played as normal.

Update: It seems that enabling "Stereo upmix" in the Audio and Subtitle Settings fixes the issue. I've tested 7 different TrueHD 7.1 Atmos films and they've played without issue, so far.

Hi all, I'm wondering if anyone has experienced this issue and knows of a fix. I don't believe this happened to me with KODI 16 even once, but with KODI 17 I'm noticing that when I go to watch a movie with the Dolby TrueHD Atmos track the speakers are sometimes mapped incorrectly. For example, the rear surrounds are coming out of the front speakers and I have no center channel voices. The only fix is to stop or reboot and try again. It doesn’t happen all the time but enough to be annoying.

Setup: RPi3, LibreELEC 8.0.1 @ 5.1, Pioneer VSX-824-K.

Wow, what an incredibly rude reply. Why not just ask for a log?

About a second or so after first playing a movie playback will pause, requiring me to press play again to resume playback.