Posts by estimadarocha
-
-
eBay is full of them Works like in this picture
wow... but that needs the retransmitter to be aligned with receiver on stb right?
and RF solutions any?
-
small question for experts: all my bedroom tvs are fixed by low profile supports to the wall. those low profile supports barely have free space however it's enought to hide a s905x box. with the box sit behind tv it's impossible to control it with normal remotes. is there any usb IR extender thats works? Thanks
-
-
-
GDPR-2 i am about to try your builds on mecool m8s pro plus 2gb/16gb.
whats the best dtb for this?
Thanks
-
Like i said before i am pretty sure that's not the cable cause the same cable connected to hauppauge, tbs or even to wetek play 2 run smoothly... i will try test it with vdr!
-
CvH tested today with force old status and still no luck... any other guess?
-
CvH i will try it and give you my feedback
-
but do you have also the same problems with it?
-
CvH no... you did not understand i tested the xbox tuner on the last ksaqs build with mecool m8s pro+ (s905x) and i saw PER on tvheadend and also transport/cc errors.... so its completely unusefull.
So i was asking if you have also experienced any problems like this!
If i connect to the same coaxial where i tested the mecool and xbox tuner a wetek play everything runs smoothly!
-
CvH do you have problems playing streams with it??? i tested it last time with ksaqs build for s905x and it was a completely mess.... i saw PER on tvheadend and also transport/cc errors.
I am sure it's not signal issue cause i am using a wetek play dvb-c on exactly the same place where i tested it!
-
CvH do you know the differences between the GitHub - trsqr/media_tree at xboxone_new and the old one?
-
hi does anyone here use xbox tuner on kszaq build? with this last build i have a lot of problems with signal... PER/Uncorrect blocks/transport errors and continuity also! before anyone say it's a signal issue i tried on different places with different source signal and in both places the signal it's perfect on tbs and hauppauge cards!
Thanks
-
This is a question for a hardware related thread. It has nothing to do with this build, let alone software. Please post elsewhere.
you are right sorry!
-
If it's a kszaq's LE build module, shouldn't be a problem
the problem is find one thats compatible with board!
-
You can buy a supported wifi module (for example this), remove the original and solder the new one.
Upo001 post it to another forum:
He succesfully changed the wifi modules in at least two box (Tannix and Mecool).
is it possible to do the same with ac module?
-
afl1 again new one.... Mecool launch KI Plus with s905d also!