Posts by envagyok

Any solution for this?

Quote from Albe90

First of all, thanks for your great work kszaq, it's incredible how these little boxes become powerful with LibreElec.

I have noticed that the picture is a bit darker than other devices: the same movie played on different devices clearly shows this problem. I tried different releases, but they all do the same. Is there something you can do to fix it? Thank you in advance.

Maybe use other color space than other devices.
You can fine tuning your TV with calibration video

A sample box for kszaq

Quote from piotrasd

- for audio sync please check advancedgui i think there was some delay, try with 0
- yes i know i will try add
- livetv hd channels (1440*1080 50i) deinterlacing jerky (choose only VAAPI method )
you can also try switch driver to modesettins on some devices work much better than intel
--> to do that create file xorg.conf in /storage/.config (or config folder exposed over SMB) ant please put this

Code

Section "Device"
Identifier  "Device0"
Driver      "modesetting"
EndSection

about audio yes - there is patch only for HDMI sound with downmix to stereo or multichannel PCM
a saw some patches for baytrail - maybe in some free time i will check.

Display More

Maybe can you setup audio output to 7.1 multichannel output, and dd,dts,dolby TrueHD,and DTS hd software decode to 7.1?
Like raspberry pi does.

After some testing:
+Video refresh rate working, decoding ok.

-audio sync problem
-No Bluetooth
-Gui slow
-livetv hd channels (1440*1080 50i) deinterlacing jerky
-No audio, and hd audio passstrough

At settings/Base
User interface level: expert
Is the magic

Thanks piotrasd!

Quote from kszaq

envagyok Please try the new build: Release 7.0.3 for LibreELEC · kszaq/my-addons · GitHub

Awesome!
Thanks!
It all works perfect.
This is a must have application!
Thanks again
Why not this app in repo?

I have smartcard reader connected to wetek play, type:
Bus 001 Device 007: ID 04e6:e003 SCM Microsystems, Inc. SPR532 PinPad SmartCard Reader
I need watch to encrypted tv channels with subsription card.I running oscam, and tvheadend addon. I combine tvh with oscam already to work together, and my question only, how can connect the reader to socam.
I think me need make a reader, but with what settings?

Thanks for helping.

I have 2 link for iptv channels, and epg:

getlist.php
getepg.php

With pvr iptv simple client plugin it work, but I need centralize iptv too together with other tvheadend sources.
How can I configure with tvheadend to collect, and grab the iptv channel too?

Quote from kostaman

Got it!
Adjust refresh rate of the display to match video frame rate of live TV streams using simple iptv client not working.
Sorry about that "Lost In Translation"
Have you played around with settings ?
I use "On start/stop"
Pause during refresh rate change "Off"
My TV seems to respond to these settings but this may not be the case with your TV.
Sorry about the misunderstanding. Good Luck with it.

Display More

I use same setting, and my TV every time switch to correct refresh rate, except when I watch iptv with Simple iptv client.
And as I edited my comment before, from 50 to 60Hz switch, but from 60 to 50Hz not.
With my pvr client, like tvheadend it working correctly

Quote from kostaman

Read Changelog before posting something as a bug.

Jerky playback of some 29.97fps videos and some Live TV channels (Amlogic HW decoder bug).

LibreELEC

You wrong.

This is not jerky playback bug.
This not change kodi the correct refresh rate bug
And only with Simple iptv client.
Tvheadend (livetv) change, movie playback change, just iptv not

Edit:
Interesting: when I set up gui to 1080p50, then watch the US iptv (30fps) channel, then switch to 1080p60 correct
When I switch back gui refresh rate to 1080p60, the watching eu iptv (25fps), then not switch, stay at 60fps.

My minimx with latest 7.0.2.007 version play perfect refresh rate all movie, all tvheadend channel. (the settings are good to change refresh rate St start/stop)

I installed pvr iptv simple client plugin to play iptv streams. I have streams with 25fps, but played every time at gui's 60Hz.
After and before I switch to tvheadend channel, or watch a movie, then always switch the needed 23.97,24,50,60 Hz frequency

Log attached.
log-2016-09-17-06.19.04.zip

I have problem so far with sd dvb-t channels too.
Hungarian dvb-t channels
720*576 ar15:11 (when I record, I see this in tvheadend log), this is 4:3 stream, and played almost good.
720*576 ar20:11 this is 16:9 channel, but played at 4:3 mode.
1440*1080 ar16:9 played 4:3 too

So please 720*576 with ar 20:11 make to switch 16:9

I test DVB-T channels from Austria. The stream 720*576 ar16:9, it played perfect.

Quote from Klojum

Go to System / System / Input devices / Peripherals, and changes the settings of the CEC module.

I already tried disable cec completely, but not worked, with the TV turned off wetek play together.

I tried something else:
Leave enable cec.
Then when I turn off TV and avr, wetek play always turn on this devices.
After playing with other settings I make success.

When I turn off completely cec, why can TV turn off my wetek?

Other question:
How can I rename wetek play?
I mean the CEC name.

I need to disable auto power off with my wetek play with LibreELEC, because when I turn off my TV/avr, wetek play shutdown too, and I don't want it.
How can I prevent wetek play to shut down?
I know I can disable auto power off at my TV,and avr menu, but for me is better when TV shut down avr too, and volume settings to my avr just then working, when auto power off enabled.

Quote from kszaq

The latest dev version from yesterday include the K1plus drivers?
Please note me when available for testing.

Quote from kszaq

media_build included in my builds seems to support these tuners. You should note that DVB drivers for external tuners are experimental and I don't know how to fix anything if it doesn't work.

Thx,
When I first try, isn't recognise, maybe the dc not plugged in perfectly...
Already working