Posts by AtHoS

K1-plus and DVB-T

Thx afl1, the version of LibreELEC-S905.arm-8.0-8.0.0f-I fast channel switching work great with service.tvheadend42-8.1.113 + pvr.hts-3.4.19.1

Quote from afl1

Have you updated tvheadend dbt-t setting for frontend?
Simple updating is not enough. New driver has 3 frontends, old only 1. In old driver dvb-s/dvb-t/dvb-c were connected to frontend0. In new driver dvb-s has frontend0, dvb-t frontend1 and dvb-c frontend2. After update dvb-t/dvb-c have no networks. It is necessary set them again.
Pls, try ones more again and let me know result.

Yes, I enabled the DVB-T tuner in Tvheadened frontend DVB Inputs -> TV Adapters (pick the Enabled checkbox and set the network to my predefined), because with the new configuration is automatically "deactivated" while the HTSP Client say: No free tuner available.
After enabled DVB-T in Tvheadend frontend (and set Network and 'Maximum PIDs' to 26) changed HTSP Client message from "No free tuner avaliable" to "No signal"

Unfortunately I could not find a solution

Quote from afl1

Another great news!
I fixed internal dvb tuner switching dvb-s/dvb-t/dvb-c in tvheadend.
Big thanks to Jaroslav Kysela from tvheadend team for help and fixies in tvheadend.
New version in #1, upgrade also tvheadend42 to 8.1.111.

Bad news: K1-plus + DVB-T
This version (LibreELEC-S905.arm-8.0-8.0.0e-I.img.gz) with recommended service.tvheadend42-8.1.111.zip + pvr.hts-3.4.19.1.zip + set In tvheadend limit 'Maximum PIDs' to 26 (DVB Inputs -> TV Adapters), but allways generated error message: Tvheadened HTSP Client: No Signal

Restarted the TV box many times and reverted TVHeadend back to service.tvheadend42-8.1.110d.zip, but the error message remain.

After reverted back to LibreELEC-S905.arm-8.0-8.0.0d-I.img the problem is fixed and the channels are right

Quote from Bitman

Is it possible to backup the satellite frequency/transponder data between firmware updates ?

Yes!

Settings -> LibreELEC -> System -> Create System and Kodi Backup

once completed copy the .tar file from samba sharing to PC

.tar include the tvheadened configuration files:
/storage/.kodi/userdata/addon_data/service.tvheadened42

copy it back to this folder for new version software and then install tvheadend42

Quote from willyfan

I'm trying now, but no results, always scan fail. But I don't have OSCAM, I need it?

OSCAM not needed, only descrambling for coded channel with smart card reader + conax card

afl1

Quote from willyfan

DVB-T i working? Scan is working? With TVHeadend?

Scan succes third, fourth attempt per mux with TVHeadened (+OSCAM linked the #1)

Quote from afl1

I uploaded version with newer demodulator firmware:
LibreELEC-S905.arm-8.0-devel-7.95.beta5N1-20170211205001.img.gz
DVB-S/S2 patch ver 2.0 build 21316
DVB-T/T2 patch ver 2.0 build 22269
DVB-C patch ver 2.0 build 22219

Current version LibreELEC-S905.arm-8.0-devel-7.95.beta5N-20170208144157.img.gz has following firmware builds:
DVB-S/S2 patch ver 2.0 build 20193
DVB-T/T2 patch ver 2.0 build 20230
DVB-C patch ver 2.0 build 20156

Pls, evaluate both version for each type of DVB.

Display More

Fine, 7.95.beta5N1 working with DVB-T

Quote from afl1

This is a question or you discovered issue ???

Of course the question ..... but I always set NEVER to mpeg2 hardware decoding

Quote from afl1

pvr.hts-4.0.6.zip is buggy. Use pvr.hts - 3.4.16.1 from LibreELEC repository.

Same issue in both pvr.hts. Sometimes kodi after buffering is unable starts playback. But pvr thinks it did. This status is permanent and switching channel doesn't help. Starting playback from other source (e.g. play movie from hd) fix this status. It must be bug in kodi or in pvr addon.

The version 2017-02-06 LibreELEC-S905.arm-8.0-devel-7.95.beta5b-20170206161635 it does not include the error with Kodi Krypton 17.0 final + pvr.hts-4.0.6

With 7.95.beta5N experiencing the error...it may be because of the new driver?

Quote from charlie13

I have installed but I do not know what example, to use the program to search for channels

Setting up TVHeadend 

Quote from afl1

New version pvr.hts-4.0.6.zip in first post.

Thank you afl1, but the problem remains....however, the fault did not rest...

In the TVHeadened User Configuration section, the streaming and video recorder field it was empty.
After I edited and both of them set it all right's, the pvr.hts-4.0.6 go work

See if someone else can come in handy this information.

Quote from quitroot

afl1 as usual, thanks for the update.
this sentence still relevant?
- Latest addon service Tvheadend42 is broken. Install fixed version service.tvheadend42-8.1.109.zip and disable auto-update.

Tvheadend HTSP Client 3.4.16.1 (installed from LE repository) do not work with fixed version service.tvheadend42-8.1.109.zip -> error message: Acces denied
and do not work with downloadable version from LE repository (same error message)

It was also the same as the previous fixed version tvheadend42 (.108)

However service.tvheadend42-8.1.107.zip and pvr.hts-3.4.12.zip work very well

Quote from kruxty

i tried to install many tvheadend backends and its not working anyone. can u send me one link to download and install on my malaysk spmc image?

i install kodi and try the same, but its not working neither...

id like to preserve the malaysk firmware on kii pro till i have working a tvheadend. is it posible?

thanks

you want to use under android?

Quote from kruxty

i cant connect tvheadend to my dtv-s2 input in my KII Pro... how can i do it? thanks. is there any howto video?

thanks so much

Install a TVHeadend PVR backend

Quote from kiipro

Thank, afl1 .
I downloaded that, but looks like also need HTS PVR, because after update, it not work

This duo works for me:

service.tvheadend42-8.1.107.zip

pvr.hts-3.4.12.zip

Tvheadend 4.2 + PVR HTS Client updated automatically to 8.1.109 + 3.4.14 and now don't work with DVB-T.
Manually uninstall then reinstall from backup ver 8.1.107 + ver 3.4.12 and work fine again.

Naturally disabled now the automatic update in settings

Quote from afl1

Pls, send me output from lsusb command to see T3 air-mouse ID and ls -l /dev/input/by-id

LibreELEC:~ # lsusb
Bus 001 Device 005: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 001 Device 004: ID 0b38:0010 Gear Head 107-Key Keyboard
Bus 001 Device 003: ID 1d57:ad03 Xenta
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
LibreELEC:~ # ls -l /dev/input/by-id
total 0
lrwxrwxrwx    1 root     root             9 Jan  1  2015 usb-0b38_0010-event-if01 -> ../event5
lrwxrwxrwx    1 root     root             9 Jan  1  2015 usb-0b38_0010-event-kbd -> ../event4
lrwxrwxrwx    1 root     root             9 Jan  1  2015 usb-FREEWAY_TECHNOLOGY_ad03-if02-event-joystick -> ../event2
lrwxrwxrwx    1 root     root             6 Dec 29 11:57 usb-FREEWAY_TECHNOLOGY_ad03-if02-joystick -> ../js0
lrwxrwxrwx    1 root     root             9 Jan  1  2015 usb-FREEWAY_TECHNOLOGY_ad03-if03-event-mouse -> ../event3
lrwxrwxrwx    1 root     root             9 Dec 29 11:57 usb-FREEWAY_TECHNOLOGY_ad03-if03-mouse -> ../mouse1
LibreELEC:~ #

Quote from AtHoS

I purchased a T3 air-mouse (with microfon): Buy Products Online from China Wholesalers at Aliexpress.com
I can control the mouse cursor, but the QWERTY keyboard don't work for K1 plus with 2017-01-13 friday build (T3 QWERTY keyboard works perfect on my desktop computer with W10 x64)

While wired USB keyboard works perfectly on K1 plus

K1 PLUS internal DVB-T tuner works perfectly, but since 2017-01-10 build (with updated internal tuner driver) all channels in two mux (666 MHz and 690 MHz) continuously blocky

It does not occur with 2016-12-31 32bit build and 2016-12-27 64bit build. I'm revert back to 2016-12-31 32bit build