Posts by jcoenen

  • LibreELEC 8.x images for additional dvb drivers

    Ha it's .... me again.

    Just got another tuner, this time a tbs5520SE. I smacked it onto my stock raspberry (and the stiock 8.2 LS distro), got the following messages

    [1536489.022775] usb 1-1.1.2: new high-speed USB device number 8 using dwc_otg

    [1536489.116547] usb 1-1.1.2: New USB device found, idVendor=734c, idProduct=5521

    [1536489.116560] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    [1536489.140734] dvb-usb: found a 'TBS 5520se USB2.0' in cold state, will try to load a firmware

    [1536489.141001] usb 1-1.1.2: Direct firmware load for dvb-usb-tbsqbox-id5521.fw failed with error -2

    In the /lib/firmware I found a dvb-usb-tbsqbox-id5520.fw not the one for the tuner apparently.

    So what image should I use to see if that thing is working (being interrested by the multistream (DVB-S2X) and the DVB-C/DVB-S capabilities.

    Any hint ?

  • LibreELEC 8.x images for additional dvb drivers

    I just realized how cumbersome the information I gave was, sorry.

    I had a version (can't remember which one though) installed a while back (around january 2017), and decided to install the latest Libreelec, when I realized that the DVBC cards were not recognized I installed LibreELEC-RPi2.arm-8.2.0-dvb-1.1.1.img.gz and tried all version of the drivers. I did this via the .update directory

    The only set of drivers that recognized all DVB cards was the Hauppauge.

    Unfortunately although the cards are recognized, something does not work the only functional card is the stick.

    So the non working version is the LibreELEC-RPi2.arm-8.2.0-dvb-1.1.1.img.gz

    The bits of dmesg that I sent before comes from the LibreELEC-RPi2.arm-8.2.0-dvb-1.1.1.img.gz version

    As per the paste it does not seems to work either:

    TVSERVER:~ # dmesg | paste

    <html>

    <head>

    <title>500 Internal Server Error</title>

    </head>

    <body>

    <h1>500 Internal Server Error</h1>

    The server has either erred or is incapable of performing the requested operation.<br /><br />

  • LibreELEC 8.x images for additional dvb drivers

    Hi, after installing the latest version of the DVB drivers, my Terratec H7 stopped to work and my

    TechnoTrend TT-connect CT2-4650 CI v1.1 fails too, only my third tuner TechnoTrend TVStick CT2-4400 works.

    Only the Hauppauge version recognizes all 3 cards (TBS and kernel drivers only see the TVStick).

    Bus 001 Device 006: ID 0b48:3014 TechnoTrend AG TT-TVStick CT2-4400

    Bus 001 Device 005: ID 0b48:3015 TechnoTrend AG TT-connect CT2-4650 CI

    Bus 001 Device 004: ID 0ccd:10a5 TerraTec Electronic GmbH


    [ 2.001494] usb 1-1.3: new high-speed USB device number 5 using dwc_otg

    [ 2.092088] usb 1-1.3: New USB device found, idVendor=0b48, idProduct=3015

    [ 2.092098] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

    [ 2.092106] usb 1-1.3: Product: TechnoTrend USB2.0

    [ 2.092113] usb 1-1.3: Manufacturer: CityCom GmbH

    [ 2.092120] usb 1-1.3: SerialNumber: 20151107

    [ 14.394913] usb 1-1.3: dvb_usb_v2: found a 'TechnoTrend TT-connect CT2-4650 CI v1.1' in warm state

    [ 14.395477] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

    [ 14.395585] usb 1-1.3: media controller created

    [ 14.395779] usb 1-1.3: dvb_usb_v2: MAC address: 81:7f:0f:00:00:00

    [ 14.536773] usb 1-1.3: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...

    [ 14.542427] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 300 msecs

    [ 14.542449] usb 1-1.3: dvb_usb_v2: 'TechnoTrend TT-connect CT2-4650 CI v1.1' successfully initialized and connected

    [ 18.704591] usb 1-1.3: DVB: adapter 1 frontend 0 frequency limits undefined - fix the driver

    [ 1.821490] usb 1-1.2: new high-speed USB device number 4 using dwc_otg

    [ 1.912126] usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=10a5

    [ 1.912136] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

    [ 1.912143] usb 1-1.2: Product: TERRATEC T2/T/C CI USB

    [ 1.912150] usb 1-1.2: Manufacturer: TERRATEC

    [ 1.912157] usb 1-1.2: SerialNumber: 20130903

    [ 13.988680] usb 1-1.2: dvb_usb_v2: found a 'Terratec H7 Rev.4' in warm state

    [ 13.989459] usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

    [ 13.989554] usb 1-1.2: media controller created

    [ 13.989801] usb 1-1.2: dvb_usb_v2: MAC address: 81:7f:00:00:00:00

    [ 14.169101] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...

    [ 14.205874] usb 1-1.2: dvb_usb_v2: schedule remote query interval to 300 msecs

    [ 14.205894] usb 1-1.2: dvb_usb_v2: 'Terratec H7 Rev.4' successfully initialized and connected

    [ 19.618647] usb 1-1.2: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver

    firmware side

    [ 18.456011] si2168 7-0064: firmware version: B 4.0.11

    [ 18.469645] si2157 8-0060: found a 'Silicon Labs Si2157-A30'

    [ 18.530111] si2157 8-0060: firmware version: 3.0.5

    [ 18.540356] usb 1-1.4: DVB: adapter 2 frontend 0 frequency 0 out of range (42000000..870000000)

    [ 18.554065] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'

    [ 18.564668] si2157 8-0060: found a 'Silicon Labs Si2157-A30'

    [ 18.600108] si2157 8-0060: firmware version: 3.0.5

    [ 18.704499] si2168 5-0064: firmware download failed -121

    [ 18.704591] usb 1-1.3: DVB: adapter 1 frontend 0 frequency limits undefined - fix the driver

    [ 18.704635] usb 1-1.3: DVB: adapter 1 frontend 0 frequency limits undefined - fix the driver

    [ 18.713628] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'

    [ 18.716661] si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-a30-01.fw'

    [ 19.561952] si2168 5-0064: firmware version: B 4.0.11

    [ 19.618590] si2168 3-0064: firmware download failed -121

    [ 19.618647] usb 1-1.2: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver

    [ 19.618678] usb 1-1.2: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver

    [ 19.632321] si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-a30-01.fw'

    ... bluetooth stuff deleted

    [ 20.445079] si2168 3-0064: firmware download failed -121

    I wish I made a copy of the original DVB drivers version that was working ...

    Is it possible to get it back pleaaaaaaaase

  • service.system.pcscd-addon for release 8.

    Yes, OSCAM is up and running on the test RPI, TVHeadend server of the satellite receiver is connected to the test RPi (with Omnikey and running oscam) via WiFi and it decodes the encrypted channels.

    So it's up and running !

    Many thanks, I will push it onto the sat receiver and keep an eye on it, if I notice any funnies I'll report them to you.

  • service.system.pcscd-addon for release 8.

    v 3 installed, still some path problem by the look of it.

    â service.pcscd.service - PCSC lite

    Loaded: loaded (/storage/.kodi/addons/service.pcscd/system.d/service.pcscd.service; enabled; vendor preset: disabled)

    Active: active (running) since Tue 2017-11-14 09:43:54 UTC; 1min 15s ago

    Main PID: 440 (pcscd.bin)

    CGroup: /system.slice/service.pcscd.service

    ââ440 pcscd.bin --foreground -c /storage/.kodi/userdata/addon_data/service.pcscd/config/reader.conf

    Nov 14 09:43:54 LETEST systemd[1]: Started PCSC lite.

    Nov 14 09:43:54 LETEST sh[440]: 00000000 tokenparser.l:214:bundleParse() Could not open bundle file /storage/.kodi/addons/service.system.pcscd-addon/drivers/ifd-ccid.bundle/Contents/Info.plist: No such file or directory

    Nov 14 09:43:54 LETEST sh[440]: 00001021 tokenparser.l:214:bundleParse() Could not open bundle file /storage/.kodi/addons/service.system.pcscd-addon/drivers/ifd-ccid.bundle/Contents/Info.plist: No such file or directory

    Nov 14 09:43:54 LETEST sh[440]: 00000680 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/ccid-1.4.28/src/ifdhandler.c:151:CreateChannelByNameOrChannel() failed

    Nov 14 09:43:54 LETEST sh[440]: 00000609 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/pcsc-lite-1.8.22/src/readerfactory.c:1105:RFInitializeReader() Open Port 0x200000 Failed (usb:076b/3021:libusb-1.0:1:4:0)

    Nov 14 09:43:54 LETEST sh[440]: 00000600 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/pcsc-lite-1.8.22/src/readerfactory.c:376:RFAddReader() OMNIKEY AG CardMan 3121 init failed.

  • service.system.pcscd-addon for release 8.

    Hi, I'm working from remote, downloaded (wget), removed former addon and unzipped the last one in addon dir.

    Rebooted same thing from what I can see.

    â service.pcscd.service - PCSC lite

    Loaded: loaded (/storage/.kodi/addons/service.pcscd/system.d/service.pcscd.service; enabled; vendor preset: disabled)

    Active: active (running) since Sun 2017-10-29 15:35:21 UTC; 2 weeks 1 days ago

    Main PID: 401 (pcscd.bin)

    CGroup: /system.slice/service.pcscd.service

    ââ401 pcscd.bin --foreground -c /storage/.kodi/userdata/addon_data/service.pcscd/config/reader.conf

    Oct 29 15:35:21 LETEST systemd[1]: Started PCSC lite.

    Oct 29 15:35:21 LETEST sh[401]: 00000000 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/pcsc-lite-1.8.22/src/hotplug_libusb.c:141:HPReadBundleValues() Cannot open PC/SC drivers directory: /storage/.

    kodi/addons/service.pcscd-addon/drivers

    Oct 29 15:35:21 LETEST sh[401]: 00000056 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/pcsc-lite-1.8.22/src/hotplug_libusb.c:142:HPReadBundleValues() Disabling USB support for pcscd.

  • service.system.pcscd-addon for release 8.

    ● service.pcscd.service - PCSC lite

    Loaded: loaded (/storage/.kodi/addons/service.pcscd/system.d/service.pcscd.service; enabled; vendor preset: disabled)

    Active: active (running) since Sun 2017-11-12 13:16:58 UTC; 2min 40s ago

    Main PID: 439 (pcscd.bin)

    CGroup: /system.slice/service.pcscd.service

    └─439 pcscd.bin --foreground -c /storage/.kodi/userdata/addon_data/service.pcscd/config/reader.conf

    Nov 12 13:16:58 LETEST systemd[1]: Started PCSC lite.

    Nov 12 13:16:58 LETEST sh[439]: 00000000 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/pcsc-lite-1.8.22/src/hotplug_libusb.c:141:HPReadBundleValues() Cannot open PC/SC drivers directory: /storage/.

    kodi/addons/service.system.pcscd-addon/drivers

    Nov 12 13:16:58 LETEST sh[439]: 00000054 /home/cvh/Git/LE-CvH/build.LibreELEC-RPi2.arm-8.2-devel/pcsc-lite-1.8.22/src/hotplug_libusb.c:142:HPReadBundleValues() Disabling USB support for pcscd.


    Add on is installed here's the contents of drivers' subdirectories

    LETEST:~ # ls -la /storage/.kodi/addons/service.pcscd/drivers/

    total 4

    drwxr-xr-x 4 root root 1024 Nov 12 09:08 .

    drwxr-xr-x 7 root root 1024 Nov 12 09:08 ..

    drwxr-xr-x 3 root root 1024 Nov 12 09:08 ifd-ccid.bundle

    drwxr-xr-x 2 root root 1024 Nov 12 09:08 serial

    LETEST:~ # ls -la /storage/.kodi/addons/service.pcscd/drivers/serial/

    total 77

    drwxr-xr-x 2 root root 1024 Nov 12 09:08 .

    drwxr-xr-x 4 root root 1024 Nov 12 09:08 ..

    -rw-r--r-- 1 root root 76384 Nov 12 09:08 libccidtwin.so

    LETEST:~ # ls -la /storage/.kodi/addons/service.pcscd/drivers/ifd-ccid.bundle/

    total 3

    drwxr-xr-x 3 root root 1024 Nov 12 09:08 .

    drwxr-xr-x 4 root root 1024 Nov 12 09:08 ..

    drwxr-xr-x 3 root root 1024 Nov 12 09:08 Contents

    LETEST:~ # ls -la /storage/.kodi/addons/service.pcscd/drivers/ifd-ccid.bundle/Contents/

    total 46

    drwxr-xr-x 3 root root 1024 Nov 12 09:08 .

    drwxr-xr-x 3 root root 1024 Nov 12 09:08 ..

    -rw-r--r-- 1 root root 43429 Nov 12 09:08 Info.plist

    drwxr-xr-x 2 root root 1024 Nov 12 09:08 Linux

    LETEST:~ # ls -la /storage/.kodi/addons/service.pcscd/drivers/ifd-ccid.bundle/Contents/Linux/

    total 89

    drwxr-xr-x 2 root root 1024 Nov 12 09:08 .

    drwxr-xr-x 3 root root 1024 Nov 12 09:08 ..

    -rw-r--r-- 1 root root 88212 Nov 12 09:08 libccid.so

  • service.system.pcscd-addon for release 8.

    Hmmm, I did a quick and dirty install this morning, but although the device is seen by the USB bus, I can't see it in OSCAM.

    LETEST:~ # lsmod

    Module Size Used by

    hci_uart 15605 1

    btbcm 5315 1 hci_uart

    bluetooth 292114 3 hci_uart,btbcm

    brcmfmac 184596 0

    brcmutil 4893 1 brcmfmac

    cfg80211 247930 1 brcmfmac

    bcm2835_gpiomem 2652 0

    rfkill 13757 4 bluetooth,cfg80211

    fixed 2407 0

    [ 2.100528] systemd[1]: Set hostname to <LibreELEC>.

    [ 2.145531] usb 1-1.2: New USB device found, idVendor=076b, idProduct=3021

    [ 2.145539] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

    [ 2.145543] usb 1-1.2: Product: Smart Card Reader USB

    [ 2.145547] usb 1-1.2: Manufacturer: OMNIKEY AG


    oscam

    [reader]

    label = voo

    description = PCSC card reader for fransat card

    protocol = pcsc

    device = 0

    caid = 0100

    detect = cd

    mhz = 500

    ident = 0100:000000,00AA41,00AA44

    group = 1

    emmcache = 1,3,15,0

    blockemm-unknown = 1

    blockemm-g = 1

    saveemm-u = 1

    saveemm-s = 1


    OSCAM log

    • 2017/11/12 09:16:22 00000000 s (main) System name = Linux
    • 2017/11/12 09:16:22 00000000 s (main) Host name = LETEST
    • 2017/11/12 09:16:22 00000000 s (main) Release = 4.9.59
    • 2017/11/12 09:16:22 00000000 s (main) Version = #1 SMP Sun Oct 29 19:27:50 GMT 2017
    • 2017/11/12 09:16:22 00000000 s (main) Machine = armv7l
    • 2017/11/12 09:16:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 452
    • 2017/11/12 09:16:22 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
    • 2017/11/12 09:16:22 00000000 s (config) userdb reloaded: 4 accounts loaded, 0 expired, 1 disabled
    • 2017/11/12 09:16:22 00000000 s (main) signal handling initialized
    • 2017/11/12 09:16:22 00000000 s (config) 390 service-id's loaded in 10 ms
    • 2017/11/12 09:16:22 00000000 s (net) monitor: initialized (fd=6, port=988)
    • 2017/11/12 09:16:22 00000000 s (net) newcamd: initialized (fd=7, port=12345, ip=255.255.255.255)
    • 2017/11/12 09:16:22 00000000 s (net) -> CAID: 0100 PROVID: 000000, 00AA41, 00AA44
    • 2017/11/12 09:16:22 00000000 s (net) newcamd: initialized (fd=8, port=12346, ip=255.255.255.255)
    • 2017/11/12 09:16:22 00000000 s (net) -> CAID: 0500 PROVID: 041950
    • 2017/11/12 09:16:22 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
    • 2017/11/12 09:16:22 00000000 s (main) waiting for local card init
    • 2017/11/12 09:16:22 34FA835F h (webif) webif: decompressed 183864 bytes back into 432280 bytes
    • 2017/11/12 09:16:22 34FA835F h (webif) HTTP Server running. ip=0.0.0.0 port=8888

    Whereas my working setup gives a log file on OSCAM

    • 2017/11/07 09:05:08 450FDECF h (webif) HTTP Server running. ip=0.0.0.0 port=8888
    • 2017/11/07 09:05:09 094B7B81 r (reader) Reader-Fransat [pcsc] PCSC was opened with handle: 1091085254
    • 2017/11/07 09:05:09 094B7B81 r (reader) Reader-Fransat [pcsc] card detected
    • 2017/11/07 09:05:09 094B7B81 r (reader) Reader-Fransat [pcsc] ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
    • 2017/11/07 09:05:10 094B7B81 r (reader) Reader-Fransat [pcsc] using ecm #612 for long viaccess ecm
    • 2017/11/07 09:05:10 094B7B81 r (reader) Reader-Fransat [pcsc] type: Viaccess (standard atr), caid: 0500, serial: ##########
    • 2017/11/07 09:05:11 094B7B81 r (reader) Reader-Fransat [pcsc] providers: 6 (FFF400,041950,041960,041970,041980,041990)
    • 2017/11/07 09:05:11 094B7B81 r (reader) Reader-Fransat [pcsc] Maturity level [7]= older than 7 years
    • 2017/11/07 09:05:11 094B7B81 r (reader) Reader-Fransat [pcsc] ready for requests
    • 2017/11/07 09:05:11 094B7B81 r (reader) Reader-Fransat [pcsc] found card system viaccess
    • 2017/11/07 09:05:11 094B7B81 r (reader) Reader-Fransat [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

  • service.system.pcscd-addon for release 8.

    Fine, I have a couple of them readers (Omnikey 3021 they are low priced 12 € on the web, mainly used for national ID card reading in Belgium). I'll be able to try it on a DVB-C this week-end and on a DVB-S2 next week (shouldn't make any difference though). Let me knonw where I can fetch it from.