All changes are in my github and no pizza money needed but thanks 
appreciate the thought
Sent from the Island of Venus
Posts by Demetris
-
-
Might be a silly question, but please bear with me.
I had LibreELEC-Amlogic.arm-M8SPlus-7.0.2 by alex on my MS8+ for quite some time. A few days ago it showed a popup that an update was available.
Today I restarted the box and it automatically installed LE 8.0.1. Is it this build or something else? I was under the impression that Alex is no longer making new builds for the S812 boxes.
I'm just wondering how did this automatic update happen?
Is not silly, you got it right and thats the beauty of opensource. There are some work of mine there plus many others involved but update wasnt done by me.
In fact am gonna take back some of his work to support more S812 boards and Thats the beauty of Linux!Sent from the Island of Venus
-
Nope sorry. Deleted and replaced by working release
Sent from the Island of Venus
-
Unfortunately I can find nothing suitable for the Orbsmart s82.
Thank youI usually don't do this but since is easter holiday here:
[code=php]
#*********************************************************************************************************
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_code = 0x7f800001
work_mode = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay = 121
debug_enable = 1fn_key_scancode = 0x15
left_key_scancode = 0x1c
right_key_scancode = 0x48
up_key_scancode = 0x44
down_key_scancode = 0x1d
ok_key_scancode = 0x5c
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1bmouse_begin
0 0x1c
1 0x48
2 0x44
3 0x1d
mouse_endkey_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 97
0x1b 158
0x53 102
0x51 704
0x49 139
0x52 388
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 389
0x44 14
0xbd 122
0xbb 123
0x09 393
0x11 390
0x54 391
0x4f 392
key_end
[/php] -
Extract the remote.conf for your device from these zip packages
S802 Multi Remote Patcher zips - FreakTab.com -
Have taken an Orbsmart S82 and the update of 10.4. Unfortunately, the remote control is no longer.
My English is not good.
Not again.... -
Waiting for confirmation
Sent from the Island of Venus
-
hmm looks like the new bootloader is not compatible i will revert to the old one and re upload the images.
Sorry for the trouble guys but you should be able to flash back android and re-try easily. -
Stupid question, where do I find that and how do I install it?
Cant help you here buddy. Just make sure you have the latest android firmware for your box before you take the
Libreelec route.Sent from the Island of Venus
-
Is anyone else having trouble with powering on the device? I have a number of Matricom Q (M8) & Q2 (M8S) boxes that are running this image very well. The only issue is that once you power off they will not power back on. I have to repower to get them back.Amy ideas? Thanks.
Make sure you have the latest bootloader for your device
-
Flashing rom from recovery also doesnt work, reported on my s8x2 thread by users, they also end up in recovery after flash but procedure finishes ok.
Sent from the Island of Venus
-
En mou xrostas tipote. Eimaste konta, meno perioxi omonia konta sto photoshine/miltonos.
Sent from the Island of Venus
-
Ela re tzai go pou kipro eimai. Lemeso, esi?
Sent from the Island of Venus
-
Thanks i will have a look at it. I didnt see any other reporting this. Anyway if you want to unlock the full potentials of S802/S812 you have to try Lakka.
Is the most powerfull arm soc to day.Sent from the Island of Venus
-
So you say that upgrading from android using the zip file doesnt work?
Στάλθηκε από το Moto G 2014 μου χρησιμοποιώντας Tapatalk
-
Demetris : Thank You So Much for Excellent SupportNew release tested on M8 round corners with AP6330 chip
Wifi woks - Yes
Bluetooth works - Yes
LAN works - YesRemote Control round corners does not work.
Please information on how to get remote control to work on this
Sure gladly to help you out.
Here it is, go back the thread pages 1by1 and you will find the answer. -
Demetris That did it, that you very much.
Using latest LibreELEC-S8X2.arm-8.0.1-M8.tar 133MB Apr 10, 2017 | 09:55PM
G-Box Q with AP6330 chip
WIFI - Yes
Bluetooth - Yes
LAN -YesThanks for your efforts and builds, much appreciated for reviving my box!
ah! Finally!!!
Uploading and adding support for MXIII-PLUS/MXIII-G/PROBOX2-EX-PLUS LE-8.0.1 images too!
Image Name: LibreELEC-S8X2.arm-8.0.1-MXIII-PLUS
Enjoy! -