Nice build (8.0.1a), works great on Minix Neo U1, no issues so far.
Thanks.
Posts by blakey
-
-
That sample is with variable fps.
-
Thank you... so I need a keyboard
Or if you have a smart phone or tablet you can download the Kodi remote app in App store or Kore app in Google play and long press of "i" (information) (Kodi remote iOS version) it will show you the same informations, tested on 8.0.0d.
-
I've tested all video and audio formats including E-AC3 (DD+), no issues (LibreELEC 8.0.0d), works fine for me. I have three different samples with E-AC3 and works great with passtrough switched on.
-
Yes i saw that warning after i wrote my last post but i couldn't find that audio setting anywhere, is that the one that says "Keep Audio Device Alive" ?Use Expert mode
System/Settings/Audio/Send low volume noise: Off -
Rebooted and now using PCM I have Analog Audio but there is a lot of noise over it almost cant hear.
Disable "quiet noise generation" in Audio settings. This is necessary for analog audio output. -
Build 8.0.0c with temp. sensor enabled img works perfect on my Neo U1, no issues, previous builds with the same results.
-
How is everyone's GUI smoothness in 8.0.0c? Better or no change than in previous builds?Much better than in previous builds so far.
Thanks for your work. -
On my S905 (Minix Neo U1) no freezes so far, but it was a clean installation.
-
I used gxbb_p200_2G_1Gbit.dtb should I use other for this device ?Use gxbb_p200_2G_1Gbit_OTG_Port.dtb for Neo U1.This works great for me.
-
Is it normal for the S905(X) to do some overscan at the left edge?Calibrate it.
While playing a movie press Menu or OK, go to Settings, Picture settings (Krypton), Picture Calibration, and there is 4 steps while pressing OK button, first is the Left-top corner, press the right arrow key once (1,0), press OK to the next step, Right-bottom corner, press left arrow key once (1,0), that's all, quit and save it for all similar movies. You must to do that for all frequencies (23,976, 24, 25, 29,97, 30, 50, 59,94, 60 fps). -
Earlier builds give the option to reboot, power off, reboot to internal , but beta 6 directly shuts down the system.
Anyone know how to change the power off button options to reboot and reboot to internal, i need them badly.Thanks for all the support in this great community
I have option "Reboot to internal" in beta6 build. Something changed after update, skin for ex.?
-
Where?
I did clean installation 7.95.beta6 and I tested it on iso blu-rays and mkvs. Result is always same skip forward is skip to the end.
Minix Neo U1, 7.95.beta6 (temp sensor enabled, installed on SD card), tested with mkv, Blu-ray (ISO), DVD (ISO), no problem with skip forward/backward, I can skip to the next chapter and to the previous chapter without mistakes. -
Chapter skip forward doesn't work in beta6, skips to the end. Backwards is OK.No problem here with chapter skip, in both directions works well.
-
Display More
I downloaded the file with youtube-dl and this is the media info:
Video
ID : 1
Format : VP9
Codec ID : V_VP9
Duration : 15 min 12 s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 59.940 FPS
Language : English
Default : Yes
Forced : No
DURATION : 00:15:12.244000000I'm using MAC and the downloaded file is:
-
I downloaded that YouTube video and no issue on S905 device, the file is AVC/[email protected].
-
It's with S905 (Beelink MiniMXIII TV Box 1000M LAN), the issue is the same on usb or with clean install.. one of the beta version worked before (i don't remember witch one
and dont have the image anymore to put back), and upgraded with newer one, and the issue is in every build since then. I downgraded to the 7.0.3.012h which works fine, but i loved the new Kodi 
Hmm, interesting. Have yout tried with other device tree?
-
Thank you, but.. you have different kind:)
Yes, but with the same LibreELEC build. Do you have Mini MXIII (S905) or Mini MXIII II (S905X)? LibreELEC installed on SD card, USB device or in internal memory?
Choose a different device tree if it possible.