Cant seem to find the Update folder in the File Manager, and I even connected with Putty and i dont find the Update folder, what is the exact location? and maybe i need to make a new folder name it Update and then put it? if so where
Weird.
Do a hard reset from LE Settings.
Then look for it. It should be there . /storage/.update
You should see .smb then .ssh followed by .update
Yep, Nexbox A95x has two variants, s905 and s905x - both principally have the same model name, but there is not so readily advertised model name extension B7N for the s905x variant...
Okay ! S905X and 1gb ram.
When he tried without a device tree you said the box went into factory recovery ?
Now he puts the device tree and it gets stuck Nexbox Boot animation ?
I am a little worried about the image not been burned properly to SD Card.
As far as i can tell he used the right device tree.
And the fact box boots to recovery without a device tree has lost me.
Sorry i can't help further as i don't have this box or any S905X
Not instead of go to recovery menu just stop with the NEXBOX logo...
Okay !
Symptoms of wrong device tree.
You are very sure you have S905x chip ? Android 6.0 right ? Marshmallow.
Very important. 1gb ram also.
That bloody A95X name threw me again.
I have the A95X S905 and just realised the model name is the same. 
Tried to use the LibreELEC.USB-SD.Creator.Win32 with the LibreELEC-S905.aarch64-7.0.2.009
Has been done with the toothpick method but currently no LE logo just the recovery menu
I have tried with a 2gb microSd card
I am a Mac OS user so i cannot help you with the LE Creator Windows.
I hope that you succeeded with the burning image to the SD Card
Re trace your steps.
Are you noticing that ram is being released? Like after browsing the library and playing a few videos ram is released when idle?On the Pi even after a few weeks my usage would be at 20% when idle, with 008 after 30 days i had used up 70% ram on my 2gb box.
Ram is definitely being released. Not so much in idle. I don't quite know exactly when it is released but it is definitely after playing videos
and flicking around the GUI.
As an example during previous versions i would browse my library and that caused over 200mb of ram to be used and it would never be released.
Now i would use barely 20mb and it will recover in stages.
It is nowhere near as good as the s805 but definitely the only version that has truly been an improvement for the s905 .
I don't leave my boxes on after i use them so others will have to report on their experience.
I've got it down to 250mb available and now back up to 330mb available and it has been on all day.
This is on an A95X S905 1GB / 8gb
Can you please try a next build, I no longer have no video on my side: 2016-11-14
kszaq This Dev Build is the first build with REAL MEMORY IMPROVEMENT.
This version also recovers memory whilst being used.
I am using it on the A95X S905 with 1 GB memory and it is a massive improvement.
Ok thx ill give it a try, I understand i need the device tree dtb again?
Device tree from above link. You don't have to rename the device tree any more
Just drop both files into update folder.
The reason i posted here is because 009 did that error from day 1, while 008 was fine for about 2 weeks until the error came.
Just afraid now the update will ruin it all again, Also to update will I have to clean install it? because thats just not worth it lol spent all day recovering all the addons for my parants
Where is that Update folder btw? how can I put the files there If im using libre from SD cardCan i do it in the file manager? one side have a USB drive with the img and on right side find that Update folder?
Too bad it cant update like OpenELEC could by just clicking a button in kodi lol
Do a Backup of your LE. From LE Settings create a system backup. Onto a USB.
Now just put the .009 into Update folder (Yes you can use File Manager) and reboot.
It will update to .009
So i got a kingstone 8gb microsd HC and bought an adapter, 008 with the dtb.img and it works perfectly fine, rebooted like 15 times just to see if it will come with that error and nothing.
MY only issue now is that the remote that came with the box, the Return button doesnt work, I have a T3 remote that i bought and it does work just fine. is there a way to fix the original remote tho?
LibreELEC boots extremely fast now compared to the USB drive, so i guess putting it on the eMMc will boot even faster?
How can i access the folders on the box with LibreELEC? the Android/data folder for example
Can you please update to #1
Report back.
the instruction says that on s905x "You can either keep dtb.img that is provided on SD card or download a dedicated way (they will work the same!)." so its already on the SD zip img no?
Most S905X Boxes don't require Device Tree added during flash. If you have an issue on boot then choose device tree from the version of LE.
I cant try it with sdcard because i have no way to connect it to my pc.
I have no idea what else to try, Only thing left is to install it on the eMMc
Invest in a USB SD card reader so as to use it on your PC.
Don't install to internal memory until you have a working SD Card version of LE with a working device tree.
It is only my advice and my opinion. 
All was working fine until one day i got
Your box is ? Your chip is ? Your ram is ? Your ethernet speed is ?
Your device tree is ?
I understand such seeking issues are not present in .009?
Movie files with chapters , No issues at all with .009 .
I don't have many movies with chapters so went through my library testing seek when i noticed chapters and it seems that 10 minutes forward may jump to the next chapter and that is what throws it out.
Following my post/reply #189
I have identified movie files with Chapter Markers causing the seek/skip 10 minute jump issue.
Anything with chapters will result in random minute jump like 2 minute 8 minute or 5 minute and not 10 minute.
Anything with no chapters seek/skips/forward 10 minutes perfect.
2016-11-14
Can you please try a next build, I no longer have no video on my side: 2016-11-14
Cheers kszaq
This Dev Build has improved results except for the Grand Budapest file.
It seems that there is a failure to seek and find the 10 minutes forward. I noticed 2 minutes sometimes 3 minutes or 5 minutes then eventually a freeze of video and audio. I stop the movie and start it again and it plays fine without having to re boot as before. Again i jump forward and same issues for this particular movie. I then played other movies from my library and they play fine without having to reboot.
Log attached.
log-2016-11-14-09.55.45.zip
For those who love testing new builds I have uploaded one with the following changes:
- added some mem leak fixes from Krypton and a few fixes from CGarces: Comparing 7.0.2.009...libreelec-7.0 · kszaq/LibreELEC.tv · GitHub
- fixed WHub Bluetooth
- simplified a/v buffering patch: please report whether you see any improvements/regressions over .009
- added audio improvements from Kwiboo: sound/soc/aml/m8: work-in-progress by Kwiboo · Pull Request #23 · LibreELEC/linux-amlogic · GitHub
Download from: 2016-11-13
You have to use device tree from 7.0.2.009 bulid if you update from 7.0.2.008 or older.
Updated on my A95X S905 1gb/8gb previously on .009
I have playback issues with movie files on my network which were not present before. (SMB Network ethernet into box)
I activated debug logging and re booted box to get logs.
I had trouble opening movies with timeouts movie not found but eventually i was able to open files.
I played files and after i hit seek/forward on remote control wheel i started having playback issues.
Only a reboot allowed me to play movies properly again but the same issue if i jump seek on remote.
Frozen picture with audio still progressing. I then stopped the grand budapest hotel (see logs) and opened another movie on my network
which played with video slow jumping frames and audio was good. Stopped that movie and played another with the same issues.
See log from A95x s905. (Same issues with MiniMx S905 2gb/16gb) .009 device tree used to update again but that did not fix.
log-2016-11-14-00.28.18.zip
EDIT :Went back to .009 on my MiniMx 2gb/16gb with no issues playing same files and using seek/forward jump.
kostaman Audio ahead of video is a known issue. Currently Peak3D developer is working on improving a/v sync in Krypton (and I'm trying to give some feedback on it) - when it's decided that the PR is ready, I will issue a test build.
Not a problem kszaq.
I realise Krypton is still very Beta and I've only flashed my MiniMx 1gb/8gb .
I'm barely using this box except for testing.
