Trying update the firmware so to run Kodi 17 but have been told by a few people that installing LibreELEC 8.0 will not work with the V3 board and may brick the box.
Run Krypton 17 Via sd card. That wont Brick your box. Both Versions on the 1 box.
Posts by kostaman
-
-
As librelec officially does not support piracy addons I wouldn't hold my breath on anyone rushing to find a solution.
The Movie Database is not a Piracy Add-On.
23:43:55.010 T:2557473696 ERROR: CCurlFile::Stat - Failed: Couldn't resolve host name(6) for https://image.tmdb.org/t/p/original/tJ9f...RxWcrn.jpg -
Back Sticker Says this
S/N 905XC160716XXX 2+16 (I turned last 3 digits into X's In case of Privacy Issues)#1
Link above.905X Chip 2gb/16gb is a pretty good guess.
So follow instructions using a Device Tree matching those specs. My guess try this one first.(gxl_p212_2g.dtb)
Note: You will have 100mb Wlan.
How to install: #1Device Trees Index of /s905/device_trees/
-
I thinking is it fault of nand is broken, but as i say libreelec never hang or freeze. Only problem with library scan. One time when it hang it corrupt filesystem.Anybody could help what happen:
- is it fault of nand,
I had an old S805 Box that did the same thing whilst going through my library.
I re flashed Android and it did it with Kodi in Android as well.
I re flashed Libreelec and it happened again.
I believe it may be bad ram when browsing through library it stresses out and freezes.
It is not much help but i just thought i would respond.
The box was working for about 3 months prior to the issue. -
Thank you... Should I store it there anyway (for next time), or, does that folder get emptied after reboot?
You will be advised when Device trees need to be updated when Future Update requires new device trees.
The Update Folder will be emptied when the Update is completed.
-
1. does "Update folder" mean "/storage/.update" folder?
YES
did above mean that I need to download "gxl_p212_2g.dtb" and store in "/storage/.update" folder with the new image file?
R's, AlexNO The device tree won't need updating. No change to device trees with this Update.
-
LibreELEC release: S905.arm-8.0.0g
SD Card Install
MiniMx S905 1gb/8gb
Removed post due to corrupt file identified causing issue. Sorry -
this is the wifi module since it is closest to the antenna wire. it reads SCI s9082c,,,No Drivers available due to no response from manufacturer. kszaq is trying.
Anyone has a device tree for Xtreamer Whizz? ThanksYour Specs ?
S905-H ? Maybe a problem.
Gigabit LAN 1000M
Memory 2GB
Use gxbb_p200_2G_1Gbit.dtb -
Strange thing just happened to my
TX5 Pro s905x 2gb/16gb with Qualcomm QCA9377
LE Internal 7.0.3.012hRed light on but not turning on via remote or un plugging power supply and re plugging to power.
Red light comes on and stays on when power is connected.
Tried Android SD Card firmware using toothpick recovery method with no results except red standby light.
My first Bricked box.
I've never bricked a box in years of testing , not even an all black MXQ S805.
[hr]
I just have the USB Tool open and the box is recognised immediately when i insert USB .
I chose the image and it errors 7% into the flash with errors.
Amlogic Burning results.2017.02.16-21.txt (Size: 24.74 KB / Downloads: 19)
[hr]
Supplier asked for me to send them back to "Shenzhen Sally" who will get her Engineer "Hong Kong Harry"
to tell me what happened? I will report backHong Kong Harry just replied advising HARDWARE FAILURE on both boxes.
Replacements on the way. So all efforts to flash back to Android were not going to work.
Hope this helps people with the same errors in the future. -
Hi kostaman, I have the M18 and have been using gxbb_p200_2G_1Gbit.dtb. I haven't had any glaring issues, other than persistent sync issues with audio. Is there a reason why you have indicated the OTG port version?I only recommended this because of the M18 specs. I don't have this box but have a box which looks identical except it is a plastic casing which i use the OTG port version.
The gxbb_p200_2G_1Gbit.dtb. device tree did not recognise the OTG port on my box when testing was done early in the development days.
Note i have not updated this box to Krypton. I have no audio issues with Jarvis. -
I have since yesterday the "Beelink M18 Adroid TV Box".
Who can tell me what Devicetree would be the right one?Don't post links to sellers. Forum rules.
Use the one below.
Let us know how it went
.gxbb_p200_2G_1Gbit_OTG_Port.dtb -
Cheers
RayWHey Ray and others please see screenshot of how to reply and only quote RELEVANT part of the subject you are replying to.
It is getting way out of control with members quoting the whole posting and then re quoting again and again.
Pages are increasing with the same full quotes everywhere. -
i just update my q-box to the latest version of lieberelecAnd what latest version is that ? And what version did you update from ? And did the previous version you updated from work ?
i used the tree for 2gb ram 1 giga ethernet.
Are these your specs below ?
S905 2G/16G 2.4G+5G Dual Band WIFI 1000M LAN Bluetooth4.0 -
thread-5556.html
S905X: Device trees for these boxes start with gxl
Device trees for S905 boxes start with gxbb.
Next important spec is the Ethernet 100 or 1000.
More likely you have the S905X Chip which will not have 1000.
My A95X S905 Requires the Realtek wifi fix device tree but i don't have the S905X.
I believe the same is required for the S905X.
Temp Sensor disabled LE is used if your box randomly freezes on boot or reboot with the standard version. -
gxbb_p200_1G_100M.dtb
or maybe realtek wifi fix tree for devices having issues with that chip.
gxbb_p200_1G_100M_RealtekWiFi.dtb -
Would it help to also upload the other three crash logs or are they redundant? Is there any other information I can get that would help to find the cause of the crashes?Any one of the Banned Add ons you have on your box could be the culprit.
You may have to do a clean hard reset of your box and see if the problem still exists.
Then post a log. -
C'mon man, give it a rest.Done.
No wonder your post count is so high, LOLThat's not cool. I'm not going to justify my post / reputation count and choose to finish this conversation politely.
-
First revisions of MiniMX (not III, not branded) came with AP6212, second with Realtek 8723BS.My other MiniMx 1gb/8gb un branded which has no bluetooth. 1gb gb boxes had no bluetooth.
CodeLibreELEC (community) Version: 7.0.3.012j[b]LibreELEC:[/b][b]~ [/b]# udevadm info /sys/bus/sdio/devices/sdio*P: /devices/d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1E: DEVPATH=/devices/d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1E: DRIVER=bcmsdh_sdmmcE: MODALIAS=sdio:c00v02D0dA9A6E: SDIO_CLASS=00E: SDIO_ID=02D0:A9A6E: SUBSYSTEM=sdioE: SYSTEMD_WANTS=brcmfmac_sdio-firmware-aml.serviceE: TAGS=:systemd:E: USEC_INITIALIZED=7145002