Posts by kostaman

Quote from ChimeyJimmey

I would appeal to post issues, related to IR remotes there, as well as "confirmed-to-be-working" solutions for the various boxes...

Maybe a better idea to eliminate confusion.

LE9.0 remote configs ir-keytable Amlogic devices

Quote from adamg

If kszaq decides to do another community based release then it will be the same, this is a LE9 change. If people create remote configurations and share them then they can be added to future builds for the benefit of all, the instructions are not rocketscience and I have tried to make them as easy to understand as possible.

To eliminate confusion with the old remote.conf

Members can share their remote files here in this thread.

A photo of remote may help those with obscure named boxes.

Remote configurations for WeTek/Mecool/Minix/Tanix TX5 TX7 Tx Mini TX3 have already been baked into the COMMUNITY images.

Update Device tree if you receive the 'no devices found' message or your remote does not work with above devices with remote baked in image.

Note : If you have changed remote Delay and Period due to sluggish commands, please disclose.

TX3 Mini that i used.

Changed Repeat delay to 375 ms and repeat period to 100 ms

ir-ctl -t 50000
ir-keytable -D 375 -P 100

Also please read LE9.0 remote configs ir-keytable Amlogic devices

Further tweeks

Quote from jasonhelene

I need to find out how to set av video output to 480p on my box, please! any tips? im using ntsc tv.

This is an Alpha Build so i would not be trying this until you use stable kszaq builds to see if it works.

Read from [8.2.3.1] LibreELEC 8.2 for S905/S905X

Quote from yatoya

My remote works but time reaction is really slow. Same slow behavior when using TV remote in CEC mode.

Name your Box/Remote to compare to others.

My TX3 Mini lags in receiving command presses. There is a delay.

Official Kodi Remote via my phone works perfect.

CEC is perfect with my Sharp TV Remote.

TX3 Mini Test

Just plugged in my powered hard drive which is formatted NTFS and it does not show up under file manager or videos.

I rebooted and not showing up.

No notification when plugging it in.

Notification comes up when i pull it out. (Successfully Ejected)

Tried both USB Ports.

This powered Hard drive is normally plugged into my TX7 and records my TVHeadend Recordings.

No issues with it being seen on the TX7 Box Running 8.2.3.1. See signature.

From below log something not right Line 609 and 610 maybe ???

Note:

For interlacing issues artefacts Create autostart.sh and copy to .config

The TX3 Mini suffers from this when playing .ts TV Recordings.

It is not this build. It happens on all stable builds as well.

echo 1 > /sys/module/di/parameters/bypass_all

Quote from adamg

When you burn a the 8.90.4 image you get the latest device trees inside the device_trees folder, or if updating the latest ones uploaded

Fresh SD Image install i replaced the device tree with the one in the Folder Device Trees in the image as the uploaded one failed to recognise my remote.

That worked. So i think this should be noted on the OP Below.

Quote from adamg

Device trees: here

Quote from adamg

have you updated your DTB?

Absolutely. I must stress i did the TX7 First.

I then inserted the SDcard without the Mini DTB as i knew the lcd would not work but i hope that isn't the cause of remote not responding ?

Quote from adamg

It could be your remote has a different set of IR codes, follow the instructions and upload the codes to pastebin for me

Very late in my part of the world. I'll give it a shot tomorrow.

Here's the stock remote.conf for now.

remote.conf tx7 tx5 tanix mini.zip

TX5 TX7 Tanix Mini this works on all boxes previous builds.

Quote from adamg

It's only configured for this remote

Thats the remote i have. The same remote works with both TX7 & Mini in all previous builds of yours and kszaqs

Quote from adamg

Remote configurations for WeTek/Mecool/Minix/Tanix (mini remote) have already been baked into the image.

Fresh SD Card Install.

Tanix TX7 & Tanix Mini have the same remote.

Both boxes not responding to any commands including red off button. CEC Works

Quote from StEwe

I am sorry but I am not very familiar with Linux, can you give me some instruction on how to check what you are saying? Thank you...

Index of /s905/8.2/device_trees

Asando90

Link #8
Link #109

Quote from Asando90

Thanks for the file but I cannot get this screen to work, all I get is boot even when the box is powered down

I've just copied the device tree out of the actual box right now and re uploaded. Link #123
If this doesn't work there is something wrong that i can't explain.

Quote from Asando90

Thanks for the file but I cannot get this screen to work, all I get is boot even when the box is powered down

I've got the 2gb/16gb TX3 Mini . What spec is yours ?? I know there are 1gb models.

Quote from chewitt

If you drag the discussion onto the use of VPN services to bypass geoblocking (which some view as a soft form of piracy) this thread will be locked and then binned.

You can bin this thread for whatever reason but not because geoblocking circumventing is a form of Piracy.

Breaking Netflix Terms and Conditions of Use is not Piracy nor is it Illegal.

In Australia and New Zealand The Copyright Act does not make it illegal to use a VPN to access overseas content.

While content providers often have in place international commercial arrangements to protect copyright in different countries or regions, which can result in ‘geoblocking’, circumventing this is not illegal under the Copyright Act.

Using a VPN to get around geo-blocks to access overseas content is a violation of the provider's terms of service, it is not Piracy.

if you don't mind breaking a contract and the contract being potentially, terminated, then its fine.

Is it a crime? No.

Quote from kszaq

There are no forum rules that forbid posting device trees...

Thanks for clarifying as a lot of Hoo Ha previously with this source code business made me cautious.

tX3Mini_dtb.img.zip

Quote from Asando90

do you have the device tree to share as it appears to have temporarily been removed

I've got it but not sure with the latest forum rules whether this is allowed ?

GDPR-2 is this cool or not ??

Quote from velqn

Yes. It makes a great LibreELEC device,

Not from what I've read from members with this box. Plus below.

Quote from kszaq

Amlogic has not released fbdev Mali libraries and has no plans to release them. These builds use libhybris and Android gralloc Mali driver to provide OpenGL for Kodi - an experimental approach with CPU overhead - meaning suboptimal GPU performance.