Posts by DarkAllMan

    My Kodi has 2 profiles:

    • Master Profile (Mysql DB)
    • Kids profile (second Mysql DB)

    When I setup kodi to start from master profile, no issues.
    When I change auto logon to Kids profile, Kodi won't boot:

    When I boot to master profile, then logoff (or LoadProfile) to go to kids profile, no issues.

    Who knows what's happening?

    Serial Output of: LibreELEC-imx6.arm-8.0.1-sr-3.14.img.gz 27-Mar-2017 15:19
    It never boots.... keeps black....

    Terminal output:
    U-Boot SPL 2013.10-rc4 (Mar 04 2017 - 12:14:23)
    Boot Device: SD1


    U-Boot 2013.10-rc4 (Mar 04 2017 - 12:14:23)

    CPU: Freescale i.MX6Q rev1.2 at 792 MHz
    Reset cause: POR
    Board: MX6-CuBox-i
    DRAM: 1 GiB
    MMC: FSL_SDHC: 0
    *** Warning - bad CRC, using default environment

    In: serial
    Out: serial
    Err: serial
    Net: FEC [PRIME]
    (Re)start USB...
    USB0: USB EHCI 1.00
    scanning bus 0 for devices... 1 USB Device(s) found
    scanning usb for storage devices... 0 Storage Device(s) found
    scanning usb for ethernet devices... 0 Ethernet Device(s) found
    Hit any key to stop autoboot: 0
    mmc0 is current device
    ** Unable to read file /boot.scr **
    532 bytes read in 11 ms (46.9 KiB/s)
    Importing environment from mmc0 ...
    8344520 bytes read in 378 ms (21.1 MiB/s)
    Booting from mmc ...
    ** Unable to read file /imx6q-cubox-i-som-v15.dtb **
    WARN: Cannot load the DTB and boot file is type zImage
    if you have not appended a dtb to the file it may
    hang after displaying Starting kernel...

    Booting /KERNEL
    Kernel image @ 0x10800000 [ 0x000000 - 0x7f53c8 ]

    Starting kernel ...

    I tried the LibreELEC-imx6.arm-8.0.0.img.gz as well... has about the same output... it cannot read some files and cannot start kernel.


    I don't experience these freezes. I am running 4.8 version, maybe you could try that one?
    About the last video screen with the screensaver: this can be seen with 3.14 as well as 4.8. This behaviour started some month ago, I didn't figure out what changes introduced this, but I think this is more likely a Kodi issue than a LE issue.

    ok, I will try that release tonight...

    Hi there,
    I also have a Cubox and I installed LibreELEC-imx6.arm-8.0.0-sr-3.14.img.gz, because the main libreelec version did not boot (blackscreen only).
    I also have the freezes during movies. Also I noticed that when screensaver DIM kicks in, it shows the last video screen.
    For instance I still see the last shot of credits of a movie... is this Kodi behaviour or is this related to this release.

    Which version must I try to fix the video issue?