Out of curiosity... Anyone know if the S905X chip can handle VP9 Profile 2 with HDR for YouTube streaming assuming there's an app/add-on that works!?
Yes...VP9 Profile 2 files number 15. and 16. under section 5 from this link: Samples - Official Kodi Wiki play smoothly...however, they are not flagged as HDR so have the wrong dynamic range and colors in playback...
check your execute rights with "ls -l autostart.sh"...perhaps you need to run ugo+x command again
Not with me...I disconnected the Ethernet, even dsabled it and wireless option is stil availble after reboots or power offs...I only need to deactivate/reactivate to get the availbale wifi networks...
reboot again or power off/on...this happens sometimes...happend to me only once
Under network you should have "wireless networks" selecion...disable it then enable it and you shoiuld have neraby wireless networks available under "connections"
Oh, I missed that you made it work, I'm glad to help...now we wait to see if we get bluetooth support as well...this box only has 2 USB connectors, hate to loose one to the airmouse IR receiver...
This is actually a great sign...this means it should work!!! Reboot and look for wireless under network
Ah...reboot and see...
yeah, sorry, you must do ./autostart.sh again, after ugo+x command
it's perhaps best if you reboot
do the command again...try from inside .config directory, try ommitting the path /storage/.config
after that do "ls -l autostart.sh" and report output here
Yes, that was my ouptut as well before I did the "chmod ugo+x /storage/.config/autostart.sh" command
@kodisuer:
do the following:
cd #
cd .config
./autostart.sh
put here the text output it produces
No, I meant for you to execute "autostart.sh" via command "./autostart.sh" (without quotes) from inside .config directory
I think @cocamus shoud boot into android, install CPU-Z app and check which board and how much RAM there is in the box...
Okay !
Symptoms of wrong device tree.
You are very sure you have S905x chip ? Android 6.0 right ? Marshmallow.
Very important. 1gb ram also.
Yep, Nexbox A95x has two variants, s905 and s905x - both principally have the same model name, but there is not so readily advertised model name extension B7N for the s905x variant...
if you execute "autostart.sh" via ssh, what output do you get?
I downloaded your file and it looks OK... Do you even get the wireless option or not?... If you do, you must turn it off then on to get the SSID from the router... Also there was one time that it didn't work with me after turning on the box, so I had to reboot again to make it load wifi drivers...
Sent from my GM 5 Plus d using Tapatalk
Yup. I think this was my issue as well. The movie I tried it on had chapters. The image just froze when trying to seek on my T95X (S905X, 2GB/16GB) box. Returned to stock .009 and no problem.
[hr]Strange thing today while playing one of the LG OLED 4K/HDR demos (Cymatic Jazz), it actually turned on HDR on the Vizio P75-C1 when playing the wrong resolution (1280x720, not 4K)!
Other than lots of screen tearing with high bitrate H.264's (like 4K/60 demos, typically with 100Mbps bitrates, Amlogic bug?), the software works great and so far no problem with bitstreaming all kinds of audio to the Yamaha receiver.
I think that specific LG clip is HLG, it's currently being test-broadcasted on European satellite and it's hybrid, not true HDR, which can work as SDR as well on regular UHD TVs, so possibly herein lies the explanation... Perhaps the TV is not so strict about resolution when it gets HLG... Try turning off HDR in openelec as explained earlier in the thread and see if it will get detected as HDR and how the picture would look...I expect it to look about the same, whereas true HDR clips would look washed out...
I wouldn't care too much for 4K h.264, it shouldn't even exist[emoji15] those clips are generally made to be played on PCs where 4K HEVC is too great a strain for general purpose processors...
Sent from my GM 5 Plus d using Tapatalk
